• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.106-114
• /
• 2016

Differential sensing methods are more effective in alleviating panel noise than single-line sensing, and thus have been increasingly used in the touch screen industry. However, they have a drawback: they tend to cancel out multiple touches and need touch position recovery algorithms. This paper introduces a novel algorithm of touch position recovery for differential sensing, which is a low-complexity but high-accuracy approach for determining multiple touch positions. We have implemented the proposed method in a touch screen controller system on a chip. In the simulation experiments using realistic touch screen models and a differential sensing circuit, the algorithm exhibited a high detection performance of a signal-to-noise ratio gain of up to 52.21 dB. Therefore, we can conclude that the proposed method is substantially more accurate than the previous method. Further, the proposed method incurs little or no overhead in terms of the detection speed and the chip size.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.241-244
• /
• 2008

Recently, The high Air-Tightness and high heat insulation for building construction cause a ventilation air volume deficiency. Also, Worldwide high energy price is strongly urging to economize the air conditioning energy. Therefore Heat Recovery Ventilation is used for the satisfaction of ventilation air volume and building energy saving. Accordingly, this study dose the heat exchanger performance evaluation and economic efficiency evaluation of Heat Recovery Ventilation. And, we wish to make a basic study about HRV System application of HVAC System and Multi System Air-conditioning.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.14-23
• /
• 1995

A new dual-mode algorithm for blind equalization of quadrature amplitude modulation (QAM) signals is proposed. To solve the problem that the constant modulus algorithm (CMA) converges to the constellation with the arbitrary phase rotation, with the modification of the CMA, the proposed algorithm accomplishes blind equalization and carrier phase recovery simultaneously. In addition, the dual-mode algorithm combining the modified constant modulus algorithm (MCMA) with decision-directed (DD) algorithm achieves the performance enhancement of blind convergence speed and steady-state residual ISI. So we can refer the proposed algorithm to as a scheme for joint blind equalization and carrier phase recovery. Simulation results for i.i.d. input signals confirm that the dual-mode algorithm results in faster convergence speed, samller residual ISI, and better carrier phase recovery than those of the CMA and DD algorithm without any significant increase in computational complexity.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.84-87
• /
• 2006

Batch binding experiments were performed to assess the recovery performance of glyceraldehyde 3-phosphate dehydrogenase (G3PDH) bound to the unshielded and polymer (polyvinyl pyrrolidone. PVP)-shielded dye-ligand (Cibacron Blue 3GA) adsorbent. The adoption of a polymer-shielded, dye-ligand technique facilitated the elution efficiency of bound G3PDH. It was demonstrated that the recovery of G3PDH using polymer-shielded dye-ligand adsorption yielded higher elution efficiency, at 60.5% and a specific activity of 42.3 IU/mg, after a low ionic strength elution (0.15 M NaCl). The unshielded dye-ligand yielded lower elution efficiency. at 6.5% and a specific activity of 10.2 IU/mg.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.400-401
• /
• 2013

Mobility in a network causes link disconnections and link recovery is vital for reliability of a network. A link failure affects all the preceding nodes on a damaged routing path; creates communication delay, throughput degradation, and congestion. This paper proposes link recovery mechanisms in CCN based networks. Packet overhearing is used to update neighboring nodes information. The recovery is done by forwarding node resulting in low control overhead, and better efficiency. The proposed mechanisms increase overall performance of a typical CCN and simulation results show that our proposed scheme works very well in densely populated networks with high mobility.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1493-1503
• /
• 1999

ATM Clustering System과 같이 SAN(System Area Network) 환경에서 동작하는 시스템은 낮은 지연시간과 넓은 대역폭의 네트워크가 필수적이나 기존의 에러 복구 프로토콜들은 이러한 요구를 충족시키기에는 큰 오버헤드를 가지고 있다. 제안된 새로운 에러 복구 프로토콜은 ATM Clustering System 환경에서 최적의 성능을 나타내는 light-weight 프로토콜로 에러가 없는 상황과 에러 복구가 진행중인 상황에 따라 acknowledgement 주기를 적응적으로 변화시키는 adaptive acknowledgement scheme를 제안하여 적용하였다. 제안된 프로토콜은 상용 툴인 SDT를 이용한 논리 검증 받았고, DEVSim++ 환경에서의 성능 분석을 통해 프로토콜이 최상의 성능을 보이기 위한 파라메터 값을 찾았고, 이 값을 적용하였을 때의 성능을 기존의 프로토콜과 비교하여 제안된 프로토콜이 더 우수함을 확인하였다.Abstract While a system working with SAN, such as ATM Clustering System, requires a network with low latency and wide bandwidth, the previous error recovery protocols have a serious network overhead to satisfy this requirement. The suggested error recovery protocol is a light-weight protocol which can shows its best performance at ATM Clustering System and uses a newly suggested adaptive acknowledgement scheme. In the adaptive acknowledgement scheme, the period of acknowledgement is dynamically changed depending on the state of the network. We proved the logical correctness of our protocol with SDT and did performance analysis with DEVSim++. From the analysis, we found the optimal parameter values for best performance and showed that our protocol works better than the previous error recovery protocols.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1031-1038
• /
• 2017

In order to improve the performance of the air breathing engines, it is important to maximize the total pressure recovery through air intake. In this study, we investigated whether the Oswatitsch method, which guarantees the maximum pressure recovery for supersonic intake, is effective at hypersonic speed by compressing the intake air with the same intensity at each ramp. The non-linearity of the shock wave normal Mach number at each ramp stage was analyzed by comparing the compression ramp angle and the number of ramp to the inflow Mach number in terms of compressible thermodynamics and the operation limits of the inlet. Based on this analysis, the Oswaitisch technique yields valid conditions not only in supersonic but also hypersonic flight regime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.667-674
• /
• 2004

The performance of transmission control protocol (TCP) is largely dependent upon its loss recovery. Therefore, it is a very important issue whether the packet losses may be recovered without retransmission timeout (RTO) or not. Although TCP SACK can recover multiple packet losses in a window, it cannot avoid RTO if a retransmitted packet is lost again. In order to alleviate this problem, we propose a simple change to TCP SACK, which is called TCP SACK+ in simple. We use a stochastic model to evaluate the performance of TCP SACK+, and compare it with TCP SACK. Numerical results evaluated by simulations show that SACK+ can improve the loss recovery of TCP SACK significantly in presence of random losses.

• Journal of Digital Contents Society
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2005

In this paper, we propose and evaluate symbol timing recovery algorithm for S-DMT cable modern, which supports more channels and better quality symmetric mutimedia service over HFC network. We adopt timing recovery algorithm of PN sequence insertion in time domain and evaluate the performance of it in various noise channel such as AWGN, ISI, impulse. We verified that performance of this algorithm is depends on the channel noise environment and sampling clock offset and that over 10 dB degradation of Eb/No is occurred at the timing failure probability of $10^3$ in the composite noise channel of AWGN, ISI, and impulse in comparison with impulse noise-alone channel. finally, we verified that this algorithm showed good timing failure probability in case of sampling clock optimization was performed in advance.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.382-390
• /
• 2005

As today's networks evolve towards an If-based integrated network, the role of transmission control protocol(TCP) has been increasing as well. As a well-known issue, the performance of TCP is affected by its loss recovery mechanism that is comprised of two algorithms; fast retransmit and fast recovery. Although retransmission timeout(RTO) caused by multiple packet losses can be avoided by using selective acknowledgement(SACK) option, RTO cannot be avoided if a retransmitted packet is lost. Therefore, we propose a simple modification to make it possible for a TCP sender using SACK option to detect a lost retransmission. In order to evaluate the proposed algorithm, simulations have been performed for two scenarios where packet losses are random and correlated. Simulation results show that the proposed algorithm can improve TCP performance significantly.