• Journal of the Korean Solar Energy Society
• /
• v.28 no.2
• /
• pp.64-69
• /
• 2008

As the grid-connected photovoltaic power conditioning systems (PVPCS) are installed in many residential areas, these have raised potential problems of network protection on electrical power system. One of the numerous problems is an Islanding phenomenon. There has been an argument that it may be a non-issue in practice because the probability of islanding is extremely low. However, there are three counter-arguments: First, the low probability of islanding is based on the assumption of 100% power matching between the PVPCS and the islanded local loads. In fact, an islanding can be easily formed even without 100% power matching (the power mismatch could be up to 30% if only traditional protections are used, e.g. under/over voltage/frequency). The 30% power-mismatch condition will drastically increase the islanding probability. Second, even with a larger power mismatch, the time for voltage or frequency to deviate sufficiently to cause a trip, plus the time required to execute a trip (particularly if conventional switchgear is required to operate), can easily be greater than the typical re-close time on the distribution circuit. Third, the low-probability argument is based on the study of PVPCS. Especially, if the output power of PVPCS equals to power consumption of local loads, it is very difficult for the PVPCS to sustain the voltage and frequency in an islanding. Unintentional islanding of PVPCS may result in power-quality issues, interference to grid-protection devices, equipment damage, and even personnel safety hazards. Therefore the verification of anti-islanding performance is strongly needed. In this paper, improved RPV method is proposed through considering power quality and anti-islanding capacity of grid-connected single-phase PVPCS in IEEE Std 1547 ("Standard for Interconnecting Distributed Resources to Electric Power Systems"). And the simulation results are verified.

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.428-435
• /
• 2015

Constructed wetlands (CWs) have been accepted as an attractive and economic alternative to a variety of pollution control and provided potentially valuable wildlife habitat in urban and suburban areas, as well as esthetic value within the local natural environment. CWs are known eco-friendly technology to solve the problem of the climate change and urbanization issues. Numerous studies have been published on the various aspects of a CW. However, there are current limitations about the CW operations such as few design guidelines, poor performance results regarding the simple construction. Therefore, the objective of this research was to suggest an appropriate design and maintenance guidelines for a CW by thorough investigation of site monitoring results. The research also concentrated in redefining and reclassifying CWs, based on literatures made by the Ministry of Environment (MOE) and other organizations. Investigation at 43 CWs in Korea was performed by using collected data and by performing site survey from 2013 to 2014. Based on the results, the best practices among the investigated CWs provided water treatment, wildlife habitat, environmental education, and leisure. Also these CWs conducted a regular maintenance such as vegetation, sediment dredging and cleaning of facilities. Results obtained are intended for use by academics and any organizations involved in CW management.

• Journal of Korea Water Resources Association
• /
• v.41 no.3
• /
• pp.293-303
• /
• 2008

Reservoir turbidity flows degrade the efficiency and sustainability of water supply system in many countries located in monsoon climate region. A decision support system called RTMMS aimed to assist reservoir operations was developed for the real time monitoring, modeling, and management of turbidity flows induced by flood runoffs in Daecheong reservoir. RTMMS consists of a real time data acquisition module that collects and stores field monitoring data, a data assimilation module that assists pre-processing of model input data, a two dimensional numerical model for the simulation of reservoir hydrodynamics and turbidity, and a post-processor that aids the analysis of simulation results and alternative management scenarios. RTMMS was calibrated using field data obtained during the flood season of 2004, and applied to real-time simulations of flood events occurred on July of 2006 for assessing its predictive capability. The system showed fairly satisfactory performance in reproducing the density flow regimes and fate of turbidity plumes in the reservoir with efficient computation time that is a vital requirement for a real time application. The configurations of RTMMS suggested in this study can be adopted in many reservoirs that have similar turbidity issues for better management of water supply utilities and downstream aquatic ecosystem.

• Journal of Gifted/Talented Education
• /
• v.22 no.2
• /
• pp.243-264
• /
• 2012

The purpose of this study was to investigate the current status of R&E programs in gifted high schools/science high schools and to provide suggestions for the better program. The sample included 21 R&E coordinators in the gifted high schools and science high schools. They filled out the survey, asking about the R&E program; then, the researchers interviewed the coordinators based on the answers of the survey. The results are as follows: 1) The R&E guidelines and related materials were not enough to use. 2) At the planning step, students and the mentors received were provided a little information, such as ethical issues, students' information, the roles of mentors/ students, mentor's research interest areas and products, etc. 3) At the research step, 80% of the schools had the monitoring process but the details were not written and saved. 4) At the evaluation step, the rubric of the product evaluation existed; the rubric of performance process were established by half of the schools. 5) At the closing step, 100% of the schools had the final product materials; the results of the evaluation and the information of the mentors were saved by 2/3 and 1/3 of the schools, respectively. Discussions and suggestions were included for the better R&E programs.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.26 no.3
• /
• pp.101-128
• /
• 2015

The purpose of this study was to investigate the temporary librarians' employment status that have been placed in over 80% of the school libraries and deduce the issues of their job status for proposing some solutions to improve their job performance. To achieve the above research purposed in this study, the related literature was reviewed and analyzed and an interview was conducted with the librarians in the Chungbuk province and a survey was distributed in the same province. As a result, first, a high correlation was found between the total satisfaction and the factors as follows; 'working satisfaction', 'employment conditions', 'working environment', 'interpersonal relations' etc. In the difference verification based on the satisfaction in accordance with the employment status, a difference of satisfaction was found between the pre and post analyses of the unlimited contractions. Second, the most overall review of the temporary librarians' job performances in relation to the 'reading and lending performances was conducted, regardless of the librarian certification. Third, the temporary librarians working at the school libraries responded that 'the manpower developer' was the most difficult consideration in relation to their employment statuses. And, asked about the solutions for the improvement of their job conditions, most of the librarians wanted their job security.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.365-372
• /
• 2017

Squat exercise is one of the important free weight exercises that can safely and effectively expect the athletic performance by establishing the rationale. Therefore, it is necessary to study the side effects caused by incorrect exercise, scientific countermeasures and to develop a exercise estimation model. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture. The issues of the structural analysis for designing a foot plate for squat exercise is to model the behavior by the dynamic behavior. It should be consider that the center of gravity of each segmented body is different when the maximum load is applied. It is applied to complete system design through simulation method with kinematic dynamic, ground reaction force and load analysis for the free weight exercise equipment, VR device, and safety foot plate. In this paper, the authors propose the design method for the vertical load distribution applied in the design of the foot plate used for the squat exercise mechanism, and based on these results, design make the more safe and reliable free weight exercise equipment system.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2009

Although thin PCBs(Printed Circuit Boards) have recently been required for high density interconnection, high electrical performance, and low manufacturing cost, the utilization of thin PCBs is severely limited by warpage and reliability issues. Warpage of the thin PCB leads to failure in solder-joints and chip. The $B^2it$(Buried Bump Interconnection Technology) for PCB has been developed to achieve a competitive manufacturing price. In this study, chip temperature, package warpage, chip stress and solder-joints stress characteristics of the PCB prepared with $B^2it$ process have been calculated using thermo-mechanical coupled analysis by the FEM(Finite Element Method). FEM computation was carried out with the variations in bump shapes and kinds of materials under 1.5W power of chip and constant convection heat transfer. The results show that chip temperature distribution reached more quickly steady-state status with PCB prepared with $B^2it$ process than PCB prepared with conventional via interconnection structure. Although $B^2it$ structures are effective on low package warpage and chip stress, with high strength bump materials arc disadvantage for low stress of solder-joints. Therefore, it is recommended that optimized bump shapes and materials in PCB design should be considered in terms of reliability characteristics in the packaging level.

• Health Policy and Management
• /
• v.25 no.3
• /
• pp.185-196
• /
• 2015

Background: Issues concerning with the classification accuracy of Korean Outpatient Groups (KOPGs) have been raised by providers and researchers. The KOPG is an outpatient classification system used to measure casemix of outpatient visits and to adjust provider risk in charges by the Health Insurance Review & Assessment Service in managing insurance payments. The objective of this study were to refine KOPGs to improve the classification accuracy and to evaluate the refinement. Methods: We refined the rules used to classify visits with multiple procedures, newly defined chemotherapy drug groups, and modified the medical visit indicators through reviews of other classification systems, data analyses, and consultations with experts. We assessed the improvement by measuring % of variation in case charges reduced by KOPGs and the refined system, Enhanced KOPGs (EKOPGs). We used claims data submitted by providers to the HIRA during the year 2012 in both refinement and evaluation. Results: EKOPGs explicitly allowed additional payments for multiple procedures with exceptions of packaging of routine ancillary services and consolidation of related significant procedures, and discounts ranging from 30% to 70% were defined in additional payments. Thirteen chemotherapy drug KOPGs were added and medical visit indicators were streamlined to include codes for consultation fees for outpatient visits. The % of variance reduction achieved by EKOPGs was 48% for all patients whereas the figure was 40% for KOPGs, and the improvement was larger in data from tertiary and general hospitals than in data from clinics. Conclusion: A significant improvement in the performance of the KOPG was achieved by refining payments for visits with multiple procedures, defining groups for visits with chemotherapy, and revising medical visit indicators.

• Journal of Gifted/Talented Education
• /
• v.10 no.2
• /
• pp.47-69
• /
• 2000

One of the most controversial issues in contemporary research of creativity, whether a person"s creativity is domain-specific or domain-general, was investigated with 109 second grade children in the present study. The purposes of this study sere to empirically examine (1) the relationships among children's creative performances measured by three product-based assessments (story-telling, collage-making, and math word problems) in three domains, and (2) the relationships between children's general creative thinking sills, measured by two divergent thinking tests, and children's creative performances. The findings of this study support the position that creative ability in young children is rather (but not absolutely0 domain-specific. Children exhibited a range of creative ability across different domains rather than a uniform creative ability in diverse domains, indicating there is considerable intra-individual variation in creative ability by domain. Divergent thinking measures did not have great power in predicting creative performance in at least two of three, if not all, domains assessed in the study. It is implied from the study that it is not possible to reliably predict a child"s creative ability in one domain based on his/her creative ability in other domains or his/her overall divergent thinking ability. Implication of the study in connection with educational practices for gifted children is discussed.

• Journal of KIISE:Software and Applications
• /
• v.28 no.3
• /
• pp.224-238
• /
• 2001

본 논문은 ATM(Abstract Timed Machine)으로 명세된 실시간 시스템을 검증하기 위한 방법을 기술한다. ATM은 임무 위급 시스템인 실시간 시스템을 명세, 분석, 검증하기 위한 정형기법이다. ATM은 모드와 전이, 포트로 구성되어 있으며 모드는 머신의 압축된 상태를 표현한다. 전이는 하나의 모드에서 다른 모드로의 전환을 나타내며 조건과 이벤트로 구성되어 있다. 포트는 ATM간의 상호작용을 위한 진입을 표현한다. 다른 정형기법과 비교하여 ATM은 소프트웨어의 순환공학 과정에서 사용하기 위해 설계되었다. 역공학 측면에서 볼 때 ATM은 계산 논리뿐만 아니라 실시간 시스템의 실제 소스코드에 있는 설계나 환경정보를 표현할 수 있다. 이러한 목적을 위해 ATM의 모드는 계산모드, 추상화 모드, 주제모드로 구분된다. 계산 모드는 코드 상에서의 논리와 계산을 나타내며 추상화 모드는 모드와 전이의 블록을 하나의 ATM으로써 표현한다. 대개의 경우, 이것은 코드 상에서의 블록을 ATM내 하나의 모드로 나타낼 때 사용한다. 주제 모드는 예외나 주기적 동작 등과 같은 다수의 ATM의 주제를 표현한다. 실시간 시스템을 검증하기 위해 시스템의 소스 코드는 역명세 과정을 통하여 ATM으로 표현된다. 검증은 ATM에 대한 도달성 그래프를 생성하는 것에 의해 수행된다. 도달성 그래프는 상태와 시간을 추상화되고 압축된 형태로 표현할 수 있으며 그 결과 시간 속성을 지닌 상태 공간을 감소시킬 수 있다. 또한 시스템의 교착상태를 쉽게 발견할 수 있다. 본 논문은 ATM과 실행 모델, 도달성 그래프, 검증을 위한 속성 등을 기술하며 이들을 다른 정형 방법들과 예제를 통하여 비교한다.수 있다. 모피우스는 헤더나 광고와 같은 불필요한 정보들을 제거하는 별도의 단계를 거치지 않으므로 wrapper를 빠르게 생성한다. 궁극적으로 모피우스는 새로운 웹 상점을 사용자가 자유롭게 추가, 삭제할 수 있는 환경을 제공한다.X>와 반응시킬 경우에는 반응식 c에 의거 진행됨을 예측할 수 있었다.의거 진행됨을 예측할 수 있었다.이 거의 산화되지 않았고, $700^{\circ}C$에서도 ZnS와 ZnO 상이 공존한 것으로 보아 SnO$_2$코팅이 ZnS의 산화를 억제하는 것으로 나타났다.pplied not only to the strike system in the RSC circle, but also to the logistics system in the SLC circle. Thus, the RSLC model can maximize combat synergy effects by integrating the RSC and the SLC. With a similar logic, this paper develops "A Revised System of Systems with Logistics (RSSL)" which combines "A New system of Systems" and logistics. These tow models proposed here help explain several issues such as logistics environment in future warfare, MOE(Measure of Effectiveness( on logistics performance, and COA(Course of Actions)