• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.265-271
• /
• 2015

본 연구에서는 소형 위성카메라의 영상성능 저하를 궤도상에서 능동적으로 보정하기 위해 광학보정장치를 적용한 위성카메라의 광학설계를 수행하였다. 2개의 광학 보정장치는 각각 부반사경 및 초점면부에 부착되며 총 5자유도의 운동이 가능하다. 본 논문에서 설계한 광학부는 슈미트-카세그레인(Schmidt-Cassegrain)타입으로 주반사경의 직경은 200mm이고, GSD 3.8m, MTF 성능은 약 50% 정도이다. 설계된 광학계는 수차곡선과 Spot diagram과 MTF를 통해 성능평가를 수행하였다. 수차곡선을 통해 광학성능에 가장 큰 영향을 미치는 수차가 구면수차인 것을 확인 할 수 있고, MTF 해석을 통해서 나이퀴스트 주파수에서 MTF 30%이상의 요구 성능을 충분히 만족하는 것을 확인하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권2호
• /
• pp.169-174
• /
• 2005

A neural networks (NN) saturation compensation scheme for DC motor systems is presented. The scheme that leads to stability, command following and disturbance rejection is rigorously proved. On-line weights tuning law, the overall closed loop performance and the boundness of the NN weights are derived and guaranteed based on Lyapunov approach. The simulation and experimental results show that the proposed scheme effectively compensate for saturation nonlinearity in the presence of system uncertainty.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1147-1149
• /
• 1998

This paper presents the result of an analysis on effects of phase compensation on power system stability in the PSS parameter tuning. Synchronizing and damping coefficients are induced from lineal model for generator with PSS. Synchronizing and damping coefficients corresponding to time constants of phase compensation control block are calculated on a single machine, infinite bus test system. The Parameter tuning concepts, basic function, structural elements and performance criteria of PSS are introduced.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.78-82
• /
• 2011

In this paper, magnetic field compensation system with an open architecture and can be installed indoors is designed and measured by fabricated. To verify the shielding effectiveness, two rectangular helmholtz coils with 3-axis are fabricated to generate magnetic field and measured magnetic field inside compensation coil for 1~60[Hz], According to measurements, AC shielding effectiveness of compensation system is 96[%] of 1[Hz], 95[%] of 30[Hz] and 90[%] of 60[Hz]. The performance of system therefore can be used as the magnetically shielded room for medical and industrial field.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.69-77
• /
• 1998

Linear displacement accuracy is one of the most important factors that determine machine tool accuracy The laser interferometer has been usually recommended for the measurement of linear displacement accuracy. In this paper, microcomputer aided measurement and compensation system has been developed for the pitch error in a CNC machine tool. For accurate pitch error calculation. the analysis code for the pitch error has been also implemented according to the international standards (ISO). The PC based automatic compensation system for the pitch error is also implemented. A new algorithm for calculating optimum value for pitch error compensation is proposed, minimizing the deviation at each target points. The development system has been applied to a practical CNC maching center and the performance has been demonstrated.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.437-446
• /
• 2006

Laser vision inspection systems are becoming popular for automated inspection of manufactured components. The performance of such systems can be enhanced by improving accuracy of the hardware and robustness of the software used in the system. This paper presents a new approach for enhancing the capability of a laser vision system by applying hardware compensation and using efficient analysis software. A 3D geometrical model is developed to study and compensate for possible distortions in installation of gantry robot on which the vision system is mounted. Appropriate compensation is applied to the inspection data obtained from the laser vision system based on the parameters in 3D model. The present laser vision system is used for dimensional inspection of car chassis sub frame and lower arm assembly module. An algorithm based on simplex search techniques is used for analyzing the compensated inspection data. The details of 3D model, parameters used for compensation and the measurement data obtained from the system are presented in this paper. The details of search algorithm used for analyzing the measurement data and the results obtained are also presented in the paper. It is observed from the results that, by applying compensation and using appropriate algorithms for analyzing, the error in evaluation of the inspection data can be significantly minimized, thus reducing the risk of rejecting good parts.

• ETRI Journal
• /
• 제22권4호
• /
• pp.32-39
• /
• 2000

In low earth orbit (LEO) satellite communication systems, more severe phase distortion due to Doppler shift is frequently detected in the received signal than in cases of geostationary earth orbit (GEO) satellite systems or terrestrial mobile systems. Therefore, an estimation of Doppler shift would be one of the most important factors to enhance performance of LEO satellite communication system. In this paper, a new adaptive Doppler compensation scheme using location information of a user terminal and satellite, as well as a weighting factor for the reduction of prediction error is proposed. The prediction performance of the proposed scheme is simulated in terms of the prediction accuracy and the cumulative density function of the prediction error, with considering the offset variation range of the initial input parameters in LEO satellite system. The simulation results showed that the proposed adaptive compensation algorithm has the better performance accuracy than Ali's method. From the simulation results, it is concluded the adaptive compensation algorithm is the most applicable method that can be applied to LEO satellite systems of a range of altitude between 1,000 km and 2,000 km for the general error tolerance level, M = 250 Hz.

• 전자공학회논문지
• /
• 제54권8호
• /
• pp.107-114
• /
• 2017

본 논문에서는 3상 4선식 전력계통에서 새로운 전압제어 방식의 역률보상시스템을 제안한다. 제안하는 전압제어 방식의 역률보상시스템은 슬라이닥을 이용하여 가변되는 출력전압을 커패시터에 인가하는 것으로 보상에 필요한 무효전력을 생성한다. 기존의 커패시터 뱅크 방법을 이용하는 역률보상시스템은 선택 가능한 커패시터 용량이 한정되어 있어 부하 상황에 따라 역률보상 오차가 발생하지만, 제안 시스템은 변화하는 부하를 추종하여 오차 없이 역률을 100%까지 보상할 수 있다. 본 논문에서는 3상 4선식 전력계통에서 전압제어 방식의 역률보상시스템과 제어 알고리즘을 개발하였고 모의실험과 실험을 통해 성능을 확인한다. 제안 시스템을 수용가에 설치할 경우 역률 개선을 통한 전기료 감소, 선로손실 감소, 부하 용량 증대 효과가 기대된다. 특히 발전 사업가 측에서는 역률 보상 성능의 향상으로 송전 여유 용량 확보와 발전량 절감이 가능하다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권3호
• /
• pp.198-206
• /
• 2011

This paper presents a new programmable compensation circuit (PCC) for a System-on-Chip (SoC). The PCC is integrated with $0.18-{\mu}m$ BiCMOS SiGe technology. It consists of RF Design-for-Testability (DFT) circuit, Resistor Array Bank (RAB) and digital signal processor (DSP). To verify performance of the PCC we built a 5-GHz low noise amplifier (LNA) with an on-chip RAB using the same technology. Proposed circuit helps it to provide DC output voltages, hence, making the RF system chain automatic. It automatically adjusts performance of an LNA with the processor in the SoC when it goes out of the normal range of operation. The PCC also compensates abnormal operation due to the unusual PVT (Process, Voltage and Thermal) variations in RF circuits.

• 한국경영과학회지
• /
• 제31권4호
• /
• pp.89-103
• /
• 2006

The purpose of this study is to examine influential factors in knowledge-sharing and to analyze how these factors influence the performances of knowledge management (KM) in public enterprises. Influencing factors of KM in this study include evaluation-compensation, knowledge management system, learning culture, and organizational structures. As a result, analysis turned out to be the KM system and organizational structure directly effects knowledge-sharing and KM performances. And knowledge-sharing performed as mediating effect between independent variables such as compensation system and organization structure, and dependent variable like KM performance. Therefore, this study concludes that each factor of evaluation-compensation system and learning culture has directly influenced to knowledge-sharing, yet KM performances have Indirectly influenced.