• 산업경영시스템학회지
• /
• 제16권27호
• /
• pp.21-25
• /
• 1993

This article is concerned with cost analysis in stepdown warranty policy. The repair of item is divided into two policies. First, perfect repair can be considered that the failurerate is the same as new item. Second, minimal repair is shown that the failurerate is the same as just before the item failure In this paper, the minimal repair model is introduced. And it is assumed that manufacturers repair the item failure within the warranty periodn. But warranty period is not renewed at all. At this point the warranty cost is analyzed in manufacturer's and customer's point of view.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 춘계학술대회 발표논문집
• /
• pp.63-70
• /
• 2000

Brown and Proschan(1983) introduced a model for imperfect repair. At each feilure of a device, with probability p, it is repaired completely or replaced with a new device(perfect repair), and with probability 1 - p, it is returned to the functioning state, but it is only recovered to its condition just prior to failure(imperfect repair or minimal repair). In this paper, we limit the number of consecutive minimal repairs by n. We find some useful properties about ${\mu}$$\_$k/, the expected time between the k-th and the (k + 1)-st repair under the assumption that only minimal repairs are performed. Then, we assign cost to each repair and find the value of n which minimizes the long-run average cost for a fixed p under the condition that distribution F of the device is DMRL.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.139-142
• /
• 2003

As composite materials are gaining wide acceptance in aircraft structure, repair of damaged composite is becoming an important issue. The issues in composite repair include high cost, material interchangeability, water ingression, and structural integrity. To address these problems, researchers have studied on the composite repair in various aspects. In this paper, an Internet-based advisory service (called Repair Advisory Service, RAS) for composite repair is proposed to increase efficiency for repair process. In the RAS system the web browser is used as its user interface, which provides easy access to the service. The RAS server provides web-based tools for failure prediction, Structural Repair Manual (SRM), automated prepreg cutting process, material properties, inventory and knowledge base. The computer codes implemented for repair design estimate the tensile failure and shear failure of repaired structures. The prediction of failure is based on the maximum strain criterion for tensile failure while elastic-perfect plastic shear failure model is applied for interfacial failure. The OEM's SRM is provided in the PDF format for viewing and searching by web browsers instead of looking up paper version SRM. The knowledge base in this site offers a room to share and distribute ideas, memos, publications, or suggestions from the repair engineers. The fabrication tool of RAS reads repair geometry from engineers then generates a CNC toolpath to cut prepreg patches. The RAS service is open to public and available at http://nano.gsnu.ac.kr/. Broad feedback from field technicians and engineers is welcome to improve the usefulness of RAS.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권4호
• /
• pp.251-263
• /
• 2010

Modelling for failures is important for reliability analysis since failures of products such as automobiles occur as both time and usage progress and the results from the proper analysis of the two-dimensional data can be used for establishing warranty assurance policy. Hence, in this paper general issues which concern modelling failures are discussed, and both one-dimensional approaches and two-dimensional approaches to two-dimensional data are investigated. Finally non-parametric approaches to two-dimensional data are presented as a means of exploratory data analyses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.817-822
• /
• 2002

The problem of the crack which occures from the reinforced concrete structure could be caused by the complexed factors. When the crack happen, it caused fatal blemish to manage and maintain the structure such as structural problem, licking, spalling, viewing Even though they study and work hard to solve this kind of problem in the world, there are no countermeasure for perfect prevention of crack. After the crack checked out, a method of repair-reinforcement has been studied and operated actively, Generally, occurance of the crack in the concrete structure could be taken as granted, no need to mention the damage from the crack, domestic construction try to hide it rather than repair basically, In many cases the construction amount for repairing the crack has to be made in the construction area and the amount is very expensive. To save the repaing fee, companys repair it under the meeting of their desire. it can be expected for the effection of the construction. For this reason, we compare a new injection method to solve the demerits of the present method, to save and use the merit of the present method.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.9-16
• /
• 2009

본 논문에서는 시스템 연령(年齡)에 의해 보전 활동의 효과를 설명하는 일반 수리(修理) 개념을 이용한 최적 보전(保全) 정책에 대한 연구를 수행하였다. 본 논문에서는 주기적인 일반 수리와 고장 시 최소 수리가 적용되는 최적 보전 정책을 고려하였다. 따라서 일반 수리에 따른 보전 정책의 비용 함수를 도출하였고 최적 보전 정책을 도출하는 알고리즘을 제시하였고 예제를 통해 알고리즘의 성능을 분석하였다. 이 연구를 통해 시스템을 운영하는데 있어서 어느 수준의 보전 정책을 적용하며 어느 정도의 기간 동안 시스템을 유지할 것인지에 대안을 제공할 수 있을 것이다.

• 한국경영과학회지
• /
• 제22권4호
• /
• pp.151-165
• /
• 1997

We propose a method for estimating the probability of perfect PM from successive failure times of a repairable system. The system under study is maintained preventively at periodic times, and it undergoes minimal repair at failure. We consider Brown-Proschan imperfect PM model in which the system is restored to a condition as good as new with probability P and is otherwise restored to its condition just prior to failure. We discuss the identifiability problem when the PM modes are not recorded. The expectation-maximization principle is employed to handle the incomplete data problem. We assume that the lifetime distribution belongs to a parametric family with increasing failure rate. For the two parameter Weibull lifetime distribution, we propose a specific algorithm for finding the maximum lifelihood estimates of the reliability parameters : the probability of perfect PM (P), as well as the distribution parameters. The estimation method will provide useful results for maintaining real systems.

• 대한두개안면성형외과학회지
• /
• 제19권1호
• /
• pp.3-12
• /
• 2018

Background: Millard's rotation-advancement repair, which is used by many surgeons, can make a natural philtral column, but most surgeons use a modification of the rotation-advancement flap. The purpose of this article is to introduce a modification utilized by the authors and to provide detailed surgical procedure. Methods: We retrospectively reviewed 82 patients' medical records and presented surgical technique and outcomes. The main features of the authors' strategy are emphasizing horizontal length of the lip, orbicularis oris muscle duplication for improving the definition of the philtral column, overcorrection of domal portion than the non-cleft side in order to compensate for the recurrence during growth. Two judges rated two times the appearance of the patients' nose and lip using Asher-McDade aesthetic index. Intra- and interobserver reliabilities were determined using Cohen's kappa statistics. Results: All patients recovered eventually after surgery; however, two patients have a minor complications (wound infection in one patient, wound disruption due to trauma in the other patient). The improvement of the aesthetic results can be achieved with this modified Millard technique. Total mean scores of the Asher-McDade index was 2.08, fair to good appearance. The intraobserver reliabilities were substantial to almost perfect agreement and the interobserver reliabilities were moderate to almost perfect agreement. Conclusion: We modified Millard method for repair of complete unilateral cleft lip. The surgical outcomes were favorable in long-term follow-up. We hope our technique will serve as a guide for those new to the procedure.

• 한국건축시공학회지
• /
• 제10권6호
• /
• pp.97-107
• /
• 2010

누수균열은 상시 콘크리트 구조체의 거동, 물의 성분, 수압, 온도, 화학 물질 등 다양한 환경 요인의 영향이 작용함에 따라 이에 대응할 수 있는 성능을 확보한 보수재료 및 공법이 사용되어야 한다. 본 연구에서는 콘크리트 구조물은 국가적으로 유사한 공학적 특성(배합설계, 사용재료, 시공방법, 유지관리 등)을 가지고 있기 때문에, 누수균열에 대한 보수 접근도 크게 다르지 않을 것으로 보고, 향후 유지관리 전문가들의 공통적 기술 지침의 필요에 따라 자료를 개발하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.535-538
• /
• 2005

The problem of the crack which occures from the reinforced concrete structure. could be caused by the complexed factors. When the crack happen, it caused fatal blemish to manage and maintain the structure such as structural problem, licking, spalling, viewing Even though they study and work hard to solve this kind of problem in the world, there are no countermeasure for perfect prevention of crack. After the crack checked out, a method of repair-reinforcement has been sutdied and operated actively. In this experiment, studied durability of repair material. Experiment wave and durability of epoxy and urethane's were shown good result, and micro cement's durability displayed result that is not good. Result of a repeat tired experiment displayed result that micro cement is bad.