• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.4
• /
• pp.357-363
• /
• 1997

The effect of replacement of cotton seed meal (CSM), with various levels and sources of non-protein nitrogenous (NPN), substances on in vitro ruminal fermentation were studied. Cotton seed meal, in control ration provided nitrogen equivalent to 12.5 percent crude protein while in experimental ration was replaced at 30, 50 & 70 percent levels with urea, diammonium phosphate (DAP) and biuret, respectively. The results of incubation upto 48 hours indicated an improvement in digestibility by replacement of CSM with urea and biuret upto 50 percent protein equivalent, but not with DAP. Bacterial count from cultures containing 50% nitrogen from biuret was significantly higher than DAP, urea and CSM. Various sources of nitrogen produced $NH_3-N$ in increasing order of CSM, biuret, DAP and urea. Increasing levels of NPN resulted in progressive increase in the levels of $NH_3-N$. The levels of various NPN sources had no effect on pH. However, the pH values determined for urea and CSM were higher than biuret and DAP.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.4
• /
• pp.53-60
• /
• 1985

The plaster mixed to loam and sandy soil from 4 to 12 percent by dry soil weight, and the compaction, permeability, CBR, unconfined compressive strength and freezingthawing test were performed The results obtained are summarized as follows; 1.The coefficient of permeability reduced sharply at the plaster content of 4 percent, and in the CBR test, the swelling ratio reduced by the increment of plaster content. 2.The addition of plaster increased the unconfined compressive strength by the cementing effect, and it was found that the optimum plaster content, existed with the soil type, which showed the maximum strength 3.It was possible to enhance the unconfined compressive strength of the gypsum-lime-soil mixtures when the optimum content of plaster was mixed to the hydrated lime. 4.In case of sandy soil, the relative frost heave decreased with the mixture of plaster, however in loam soil, the relative frost heave began to increase at the plaster content of 12 percent than non-treated soil. Therefore the optimum plaster content existed for protecting frost heave by the different soil type. 5.The above summarized results make it possible to expect the effects such as improvement of soil properties, decrement of permeability, increment of unconfined compressive strength, and protection of frost heave, etc, therefore, it is considered that it is possible to it is plaster as sub-base materials of road.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.48-59
• /
• 1981

The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.129-137
• /
• 1999

Reinforced concrete structures using early age concrete were result in the degradation of structural performance due to crack, overload, unexpected vibration and impact load. It demands urgently that reinforced concrete structure using early age concrete should be improved the serviceability and structural performance with the application of new fiber materials. Therefore specimens, designed by the test varibles, such as with or without stirrup and percent of steel fiber incorporated, were constructed and tested to evaluate and develop the structural performance of reinforced steel fiber concrete beam. Based on the test results reported in this study, the following conclusions are made. Specimens, designed by the over 0.75% of steel fiber incorporated, were showed the ductile behavior and failed slowly with flexure and flexure-shear. Comparing with the load-displacement relationship of specimen BSS, designed by the recommendations of the Ministry of Construction and Transportation, reinforced steel fiber concrete beam using early age concrete, over 0.75% of steel fiber incorporated, gets enough load carrying capacity and ductility. Increasing the percent of steel fiber incorporated(0.25~2.0%), the ultimate shear stress of each specimen were increased 12~40% than that of control specimen SSS.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1610-1615
• /
• 2019

Positron emission tomography (PET)/magnetic resonance (MR) scanning has the advantage of less additional exposure to radiation than does PET/computed tomography (CT). In particular, MR based attenuation correction (MR AC) can greatly affect the image quality of PET and is frequently obtained using various MR sequences. Thus, the purpose of the current study was to quantitatively compare the image quality between MR non-AC (MR NAC) and MR AC in PET images with three MR sequences. Percent image uniformity (PIU), percent contrast recovery (PCR), and percent background variability (PBV) were estimated to evaluate the quality of PET images with MR AC. Based on the results of PIU, 15.2% increase in the average quality was observed for PET images with MR AC than for PET images with MR NAC. In addition, 28.6% and 71.1% improvement in the average results of PCR and PBV respectively, was observed for PET images with MR AC compared with that with MR NAC. Moreover, no significant difference was observed among the average values using three MR sequences. In conclusion, the current study demonstrated that PET with MR AC improved the image quality and can be help diagnosis in all MR sequence cases.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.121-124
• /
• 2003

A new form-joining process with the aid of an adhesive is proposed in which an epoxy adhesive is applied to a sheet metal pair, and before it cures the pair is clinched to cause the geometric constraint in the form of a protrusion. In order to reduce the forming load and the height of protrusions, a new die and punch set with a very small clearance was devised to reduce the depth of drawing and the forming load. Taguchi method was employed to find the optimal values of design parameters. To implement each case of the orthogonal array, the finite element method was used. The experiments showed that on the tensile-shear test, the bonding strength of the new form-joining process with an epoxy adhesive is approximately the same as that of the resistance spot welding; and in comparison with the other two form-joining processes with an epoxy adhesive, the height of protrusions was reduced by more than 65 percent and the forming load by 50 percent.

• Journal of Labour Economics
• /
• v.32 no.3
• /
• pp.61-89
• /
• 2009

This paper undertakes an international study on impacts of private education spending on student academic performance, using the OECD's PISA 2006 data. To circumvent endogeneity of the education spending, it relies on a propensity-score matching method. The empirical results suggest thai the effect of private education spending remains only modest for all the countries examined in the PISA 2006 data. A 10 percent increase in spending leads to no more than a 0.6 percent average improvement in test scores.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.23-27
• /
• 2005

Generally, when the injection molds are made in advanced nations, the improvement of a quality and production rate is obtained by using CAE. In this paper, the methodology which is possible to reduce the cycle time of injection molding process is studies by using the cooling analysis with CAE(Moldmax). In case of changing the cooling system design with the analysis result of CAE, the manimum reduction of the cycle time runs into 30 percent. Finally, the average reduction of the cycle time is 17.8 percent.

• Korean Journal of Organic Agriculture
• /
• v.20 no.1
• /
• pp.1-19
• /
• 2012

The purpose of this study is to analyze consumption of homemade organically processed food (HOPF), and to derive directions for consumption promotion of HOPF. A survey was conducted for quantitative analysis regarding consumption. This study used an Ordinal Logistic Regression Model to derive more significant results in analyzing factors of consumption. The findings was that younger consumers with high income are more likely to purchase HOPF. And those consumers with high price and quality contentment are more likely to purchase HOPF. And contentment with certification institutions and improvement of health have a significant positive relationship with consumption. Consumers were found to pay 51 percent more for HOPF than for non-HOPF products. This level show that the current level of price premium for HOPF is 51 percent higher than their desired level. In order to reduce the price premium for HOPF, effective policy programs should be developed. A targeted market strategy to sell HOPF to younger consumers with high income is needed to boost consumption. A strict certification management system should be established to enhance consumer reliability in HOPF.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.2
• /
• pp.81-90
• /
• 2006

As aging society makes rapid progress, various social problems arise. The drop of productive labor and the increase of welfare cost can be taken as examples. From this point of view, a use of aged labor is a matter of great Important to national productivity improvement. But, the participation rate of the aged in economical activity amounts to 49.8 percent and their unemployment rate does 2.1 percent. The purpose of this paper is to analyze the deterioration of skill and the lowering of adaption to new working environments due to aging. Since the aging effect is closely related to worker's productivity, it should be properly measured and analyzed. The coordination tester is used to find out activity limitations. Experimental results show that the expert skill of the workers can be improved through the effective of their experience. Therefore we can say that some operation is not influenced by aging.