• Title/Summary/Keyword: Penetration seal

검색결과 44건 처리시간 0.024초

원자력발전소 방화벽 관통부 성능평가 시범 적용 (Pilot Application of Fire Barrier Penetration Seal Evaluation in Nuclear Power Plant)

  • 박준현
    • 한국화재소방학회논문지
    • /
    • 제20권4호
    • /
    • pp.98-104
    • /
    • 2006
  • 원자력발전소 화재방호 규정에서 방화벽 관통부는 방화벽과 동등한 내화성능을 갖는 구조로 시공할 것을 요구하고 있다. 화재방호 규정이 제정되기 이전에 설계되어 방화벽 관통부 내화성능 인증되지 않은 'K' 원자력발전소에 대해서 내화성능을 평가하였다. 내화성능 평가는 육안점검에 의한 방법과 시공된 관통부 데이터와 시험체 데이터를 비교하여 판단하는 한계접근법을 적용하였다. 내화성능 평가 결과, 전체 관통부의 50%에 해당하는 관통부가 성능기준에 미달하는 것으로 나타났다. 본 연구에서는 성능평가 결과와 더불어 관통부 내화성능을 확보하기 위한 설비 개선, 유지관리 방안 등을 제시하였다. 본 연구는 가동중인 발전소를 대상으로 한 실증평가로서 본 연구에서 적용한 평가방법, 연구결과 등은 향후 타원전의 관통부 성능평가에 유용하게 활용될 것으로 기대된다.

CFD를 사용한 평행 홈 펌프 시일의 해석 개선 (Improvement on Prediction of Circumferential-Groove-Pump Seal with CFD Analysis)

  • 하태웅
    • Tribology and Lubricants
    • /
    • 제24권6호
    • /
    • pp.291-296
    • /
    • 2008
  • In order to improve the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and circumferentially grooved stator, CFD analysis using FLUENT has been performed to determine the groove penetration angle a which is the angle of separation line between control volumes II and III in groove section of Ha and Lee's three-control-volume theory. Validation to the present analysis using new penetration angle determined by the CFD analysis is achieved by comparisons with the results of published Ha and Lee's analysis. For the leakage prediction the present analysis shows slight improvement and CFD results yields the best. Direct damping and cross-coupled stiffness coefficients are predicted better to the experimental ones. However, direct stiffness coefficient is predicted worse.

수종(數種) 근관세척액(根管洗滌液)이 근관폐쇠성(根管閉鎖性)에 미치는 영향(影響)에 관(關)한 연구(硏究) (THE EFFECTS OF INSTRUMENTATION WITH SOME ENDODONTIC IRRIGANTS ON THE APICAL SEAL OF ROOT CANAL)

  • 임성삼
    • Restorative Dentistry and Endodontics
    • /
    • 제11권1호
    • /
    • pp.27-32
    • /
    • 1985
  • The purpose of this study was to examine the influence of canal irrigants and smear layer on the property of apical seal. Fourty-five canals from human teeth were randomly selected and divided into 5 groups according to the irrigants used in conjunction with instrumentation. The irrigants were RC-prep in combination with Naocl, Citric acid, Naocl, Naocl in combination with $H_2O_2$, and normal saline solution. After instrumention and dry the canal with paper point, the canals were obturated by lateral condensation of Zinc-oxide eugenol sealer and gutta percha cone. All the specimens were immersed in 2% methylene blue dye solution for 7 days and the depth of dye penetration into the canals was evaluated by macros cope. The following results were obtained. 1. All the canals experimented showed varying degree of dye penetration. 2. There was no significant difference in depth of dye penetration between the groups known to be effective and ineffective in the removal of the smear layer. 3. The canals irrigated with NaOCl alone showed the highest dye penetration and mean leakage was 7.7 mm. 4. In the canals irrigated with RC-prep in combination with Naocl and citric acid, the mean dye penetration was 5.5 mm and 4.8 mm respectively, and the canals irrigated with NaOCl in combination with $H_2O_2$ and normal saline solution revealed mean dye penetration of 3.9 mm.

  • PDF

워터실 거동의 전산시뮬레이션 (Computer Simulation of the Behavior of Water Seals)

  • 한승우;김완두;이학주
    • 연구논문집
    • /
    • 통권26호
    • /
    • pp.25-32
    • /
    • 1996
  • Water seals are used in a washing machine to seal rotating shafts and to prevent the penetration of dust, dirt or water from the outside. The design parameters of water seals, that were the location of the garter spring, the angle of the seal lip, and the interference, were investigated by the computer simulations using the hyperelastic non-linear large deformation finite element analysis code. The maximum contact stress and the distribution of stress on the seal lip were obtained for various type of water seals. The best type among the several investigated seals was selected considering the contact force and the sealing performance.

  • PDF

Post-Space형성시기가 치근단폐쇄에 미치는 영향에 관한 실험적 연구 (THE EFFECT OF POST-SPACE PREPARATION TIME ON THE APICAL SEAL OF ENDODONTICALLY TREATED TEETH)

  • 문을원;이인숙;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제13권1호
    • /
    • pp.151-158
    • /
    • 1988
  • The purpose of this study was to evaluate the effect of canal filling methods and post-space preparation time on the apical seal of endodontically treated teeth. Seventy-six single-rooted human teeth were divided into 6 groups and each tooth was obturated and prepared post-space according to the purpose of this study. After all specimens were immersed in Indian ink, decalcified and cleared, the degree of dye penetration into the root canals observed by magnifying glass (X20) and measured by caliper. The results were as follows: 1. In the thermatic condensation, no significant difference in ink penetration occured when the post-spaces were created immediately after obturation or when they were made a week later. 2. In the lateral condensation, no significant difference in ink penetration existed between teeth whose post-space were prepared immediately or delayed. 3. In comparison of experimental groups and control groups, no significant difference showed when the groups were obturated with McSpadden compactor but when the teeth were laterally condensed, the experimental groups showed less ink penetration than controls. 4. Thermatic condensed teeth with McSpadden compactor were less ink penetration thn laterally condensed teeth.

  • PDF

원자력발전소 관통부 충전구조의 내화성능평가에 관한 연구 (A Study on Assessment of Penetration Seals Performance of Nuclear Power Plants)

  • 조홍석;박준현;손봉세;임정순
    • 한국화재소방학회논문지
    • /
    • 제18권4호
    • /
    • pp.93-102
    • /
    • 2004
  • 원자력발전소에서 방화벽 관통부 내화충전구조는 화재가 발생장소 이외의 구역으로 전파되는 것을 차단하여 타구역에 설치된 안전에 중요한 기기를 보호하는 중요한 구성요소이다. 그러나 국내 장기 가동중 원전의 경우 관통부 충전구조의 내화성능을 입증하는 인증시험서가 구비되어 있지 않아 별도의 내화성능평가가 이루어져야 하고, 성능평가 결과가 적정 내화등급을 만족하지 못하는 관통부에 대해서는 관통물질의 재배치 둥의 구조변경이 이루어져야 한다 본 연구는 분석적인 방법에 의한 관통부 충전구조의 내화성능 평가기법을 정립하고. 분석적인 방법을 적용하여 실제 발전소에 설치된 관통부 충전구조의 내화등급을 결정하는 방법을 제시하였다. 이를 통하여 분석에 의한 관통부 충전구조의 내화성능평가방법은 내화인증시험서가 없는 국내 장기가동 원자력발전소에 효율적으로 적용될 수 있을 것으로 판단된다.

Push-out bond strength and dentinal tubule penetration of different root canal sealers used with coated core materials

  • Sungur, Derya Deniz;Purali, Nuhan;Cosgun, Erdal;Calt, Semra
    • Restorative Dentistry and Endodontics
    • /
    • 제41권2호
    • /
    • pp.114-120
    • /
    • 2016
  • Objectives: The aim of this study was to compare the push-out bond strength and dentinal tubule penetration of root canal sealers used with coated core materials and conventional gutta-percha. Materials and Methods: A total of 72 single-rooted human mandibular incisors were instrumented with NiTi rotary files with irrigation of 2.5% NaOCl. The smear layer was removed with 17% ethylenediaminetetraacetic acid (EDTA). Specimens were assigned into four groups according to the obturation system: Group 1, EndoRez (Ultradent Product Inc.); Group 2, Activ GP (Brasseler); Group 3, SmartSeal (DFRP Ltd. Villa Farm); Group 4, AH 26 (Dentsply de Trey)/gutta-percha (GP). For push-out bond strength measurement, two horizontal slices were obtained from each specimen (n = 20). To compare dentinal tubule penetration, remaining 32 roots assigned to 4 groups as above were obturated with 0.1% Rhodamine B labeled sealers. One horizontal slice was obtained from the middle third of each specimen (n = 8) and scanned under confocal laser scanning electron microscope. Tubule penetration area, depth, and percentage were measured. Kruskall-Wallis test was used for statistical analysis. Results: EndoRez showed significantly lower push-out bond strength than the others (p < 0.05). No significant difference was found amongst the groups in terms of percentage of sealer penetration. SmartSeal showed the least penetration than the others (p < 0.05). Conclusions: The bond strength and sealer penetration of resin-and glass ionomer-based sealers used with coated core was not superior to resin-based sealer used with conventional GP. Dentinal tubule penetration has limited effect on bond strength. The use of conventional GP with sealer seems to be sufficient in terms of push-out bond strength.

각종 근관충전용 시멘트의 미세누출에 관한 연구 (A STUDY ON THE MICROLEAKAGE OF ROOT CANAL SEALERS)

  • 조지선;황호길;조영곤
    • Restorative Dentistry and Endodontics
    • /
    • 제21권1호
    • /
    • pp.202-217
    • /
    • 1996
  • The purpose of this study was to compare the degree of microleakage of Glass-Ionomer root canal sealer possessed several enviable properties with that of the other sealers and to evaluate clinical performance. One hundred twenty single-rooted teeth were used in this experiment. The teeth were cleaned mechanically and immersed for 24 hours in 5.25% sodium hypochlorite and clinical crowns then were removed. After the root canals were instrumented using a step-back technique. one hundred twenty single-rooted teeth were divided into five groups of 24 in each. Group 1 : Tubli-Seal(Kerr Co., MI, U.S.A/ZOE-based), lateral condensation Group 2 : Sealapex(Kerr/Sybron, Romulus, MI/ $Ca(OH)_2$-based), lateral condensation Group 3 : AH 26(De Trey Co., Zurich Switzerland/Resin-based), lateral condensation Group 4 : Ketac-Endo(ESPE GMBH & CO. KG Seefeld:oberbay. Germany/ Glass Ionomer Cement-based), lateral condensation Control group : no sealer. lateral condensation And then. the root canals were obturated by lateral condensation technique with gutta-percha and experimental sealers. The control group were obturated without sealer. The teeth were placed in a vacuum chamber for 15 minutes and immersed 2% methylene blue under vacuum for 15 minutes. The teeth were passively stained for 1 week and 2 weeks and were cleared and evaluated for linear dye leakage using Tool maker's microscope(${\times}200$). The results were as follows: 1. There were statistically significant differences in the degree of dye penetration between the control group and experimental groups(p<0.05). 2. In the experimental groups, Sealapex($1.2871{\pm}0.9180mm$) exhibited the lowest mean value of dye penetration, followed by Ketac-Endo($1.4432{\pm}0.8082mm$), AH 26($1.5030{\pm}0.7752mm$) and Tubli-Seal($1.6458{\pm}1.0292mm$)(p>0.05). 3. There were statistically significant differences in the variation of microleakage between 1 week and 2weeks in Tubli-Seal and Seal apex groups (p<0.05). 4. The degree of dye penetration of all groups were increased as the time elapsed and AH 26 showed the lowest variation(+0.11) and Tubli-Seal(+ 1.03) showed the highest variation (p<0.001).

  • PDF