• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.98-104
• /
• 2006

The Fire Protection Regulatory documents require the fire-resistive rating of fire barrier penetration seals be same as that of fire barriers. Pilot application of penetration seal evaluation for K nuclear plant, built before penetration seal requirements were made, was done. In this evaluation, visual inspection and estimating fire rating by comparing installed configuration with tested configuration of penetration seals, called bounding approach method, were applied. Further improvements for retrofit and maintenance are recommended with penetration seal evaluation results also. The practical use of the methodology adopted in this study and the evaluation result of K nuclear plant will be anticipated for other plant's penetration seal evaluation.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.291-296
• /
• 2008

In order to improve the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and circumferentially grooved stator, CFD analysis using FLUENT has been performed to determine the groove penetration angle a which is the angle of separation line between control volumes II and III in groove section of Ha and Lee's three-control-volume theory. Validation to the present analysis using new penetration angle determined by the CFD analysis is achieved by comparisons with the results of published Ha and Lee's analysis. For the leakage prediction the present analysis shows slight improvement and CFD results yields the best. Direct damping and cross-coupled stiffness coefficients are predicted better to the experimental ones. However, direct stiffness coefficient is predicted worse.

• Restorative Dentistry and Endodontics
• /
• v.11 no.1
• /
• pp.27-32
• /
• 1985

The purpose of this study was to examine the influence of canal irrigants and smear layer on the property of apical seal. Fourty-five canals from human teeth were randomly selected and divided into 5 groups according to the irrigants used in conjunction with instrumentation. The irrigants were RC-prep in combination with Naocl, Citric acid, Naocl, Naocl in combination with $H_2O_2$, and normal saline solution. After instrumention and dry the canal with paper point, the canals were obturated by lateral condensation of Zinc-oxide eugenol sealer and gutta percha cone. All the specimens were immersed in 2% methylene blue dye solution for 7 days and the depth of dye penetration into the canals was evaluated by macros cope. The following results were obtained. 1. All the canals experimented showed varying degree of dye penetration. 2. There was no significant difference in depth of dye penetration between the groups known to be effective and ineffective in the removal of the smear layer. 3. The canals irrigated with NaOCl alone showed the highest dye penetration and mean leakage was 7.7 mm. 4. In the canals irrigated with RC-prep in combination with Naocl and citric acid, the mean dye penetration was 5.5 mm and 4.8 mm respectively, and the canals irrigated with NaOCl in combination with $H_2O_2$ and normal saline solution revealed mean dye penetration of 3.9 mm.

• 연구논문집
• /
• s.26
• /
• pp.25-32
• /
• 1996

Water seals are used in a washing machine to seal rotating shafts and to prevent the penetration of dust, dirt or water from the outside. The design parameters of water seals, that were the location of the garter spring, the angle of the seal lip, and the interference, were investigated by the computer simulations using the hyperelastic non-linear large deformation finite element analysis code. The maximum contact stress and the distribution of stress on the seal lip were obtained for various type of water seals. The best type among the several investigated seals was selected considering the contact force and the sealing performance.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.151-158
• /
• 1988

The purpose of this study was to evaluate the effect of canal filling methods and post-space preparation time on the apical seal of endodontically treated teeth. Seventy-six single-rooted human teeth were divided into 6 groups and each tooth was obturated and prepared post-space according to the purpose of this study. After all specimens were immersed in Indian ink, decalcified and cleared, the degree of dye penetration into the root canals observed by magnifying glass (X20) and measured by caliper. The results were as follows: 1. In the thermatic condensation, no significant difference in ink penetration occured when the post-spaces were created immediately after obturation or when they were made a week later. 2. In the lateral condensation, no significant difference in ink penetration existed between teeth whose post-space were prepared immediately or delayed. 3. In comparison of experimental groups and control groups, no significant difference showed when the groups were obturated with McSpadden compactor but when the teeth were laterally condensed, the experimental groups showed less ink penetration than controls. 4. Thermatic condensed teeth with McSpadden compactor were less ink penetration thn laterally condensed teeth.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.93-102
• /
• 2004

The function of fire barrier penetration sealing is highly important to confine a fire propagation a fire severity within a fire area where the fire started. Especially for the penetration seals at the nuclear power plants with the long-term operated history, it is needed to make it clear that the conformance to the sealing requirements has been proven to guarantee the fire-resistive performance of fire barrier penetration parts. If there are any parts of fire barrier penetration sealing which can not meet the required rating for the fire endurance performance, the relevant parts must be modified to meet regulatory requirements. At this paper, the engineering analysis methodology was established to approximate the fire endurance rating for the fire barrier penetration seals. With this study, the method of engineering analysis to decide fire endurance rating for the fire barrier penetration seals was established and this way can be utilized to check the performance of the fire rating for the penetration seal at the domestic nuclear power plants.

• Restorative Dentistry and Endodontics
• /
• v.41 no.2
• /
• pp.114-120
• /
• 2016

Objectives: The aim of this study was to compare the push-out bond strength and dentinal tubule penetration of root canal sealers used with coated core materials and conventional gutta-percha. Materials and Methods: A total of 72 single-rooted human mandibular incisors were instrumented with NiTi rotary files with irrigation of 2.5% NaOCl. The smear layer was removed with 17% ethylenediaminetetraacetic acid (EDTA). Specimens were assigned into four groups according to the obturation system: Group 1, EndoRez (Ultradent Product Inc.); Group 2, Activ GP (Brasseler); Group 3, SmartSeal (DFRP Ltd. Villa Farm); Group 4, AH 26 (Dentsply de Trey)/gutta-percha (GP). For push-out bond strength measurement, two horizontal slices were obtained from each specimen (n = 20). To compare dentinal tubule penetration, remaining 32 roots assigned to 4 groups as above were obturated with 0.1% Rhodamine B labeled sealers. One horizontal slice was obtained from the middle third of each specimen (n = 8) and scanned under confocal laser scanning electron microscope. Tubule penetration area, depth, and percentage were measured. Kruskall-Wallis test was used for statistical analysis. Results: EndoRez showed significantly lower push-out bond strength than the others (p < 0.05). No significant difference was found amongst the groups in terms of percentage of sealer penetration. SmartSeal showed the least penetration than the others (p < 0.05). Conclusions: The bond strength and sealer penetration of resin-and glass ionomer-based sealers used with coated core was not superior to resin-based sealer used with conventional GP. Dentinal tubule penetration has limited effect on bond strength. The use of conventional GP with sealer seems to be sufficient in terms of push-out bond strength.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2004.11a
• /
• pp.70-75
• /
• 2004

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2003.10a
• /
• pp.415-421
• /
• 2003

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.202-217
• /
• 1996

The purpose of this study was to compare the degree of microleakage of Glass-Ionomer root canal sealer possessed several enviable properties with that of the other sealers and to evaluate clinical performance. One hundred twenty single-rooted teeth were used in this experiment. The teeth were cleaned mechanically and immersed for 24 hours in 5.25% sodium hypochlorite and clinical crowns then were removed. After the root canals were instrumented using a step-back technique. one hundred twenty single-rooted teeth were divided into five groups of 24 in each. Group 1 : Tubli-Seal(Kerr Co., MI, U.S.A/ZOE-based), lateral condensation Group 2 : Sealapex(Kerr/Sybron, Romulus, MI/ $Ca(OH)_2$-based), lateral condensation Group 3 : AH 26(De Trey Co., Zurich Switzerland/Resin-based), lateral condensation Group 4 : Ketac-Endo(ESPE GMBH & CO. KG Seefeld:oberbay. Germany/ Glass Ionomer Cement-based), lateral condensation Control group : no sealer. lateral condensation And then. the root canals were obturated by lateral condensation technique with gutta-percha and experimental sealers. The control group were obturated without sealer. The teeth were placed in a vacuum chamber for 15 minutes and immersed 2% methylene blue under vacuum for 15 minutes. The teeth were passively stained for 1 week and 2 weeks and were cleared and evaluated for linear dye leakage using Tool maker's microscope(${\times}200$). The results were as follows: 1. There were statistically significant differences in the degree of dye penetration between the control group and experimental groups(p<0.05). 2. In the experimental groups, Sealapex($1.2871{\pm}0.9180mm$) exhibited the lowest mean value of dye penetration, followed by Ketac-Endo($1.4432{\pm}0.8082mm$), AH 26($1.5030{\pm}0.7752mm$) and Tubli-Seal($1.6458{\pm}1.0292mm$)(p>0.05). 3. There were statistically significant differences in the variation of microleakage between 1 week and 2weeks in Tubli-Seal and Seal apex groups (p<0.05). 4. The degree of dye penetration of all groups were increased as the time elapsed and AH 26 showed the lowest variation(+0.11) and Tubli-Seal(+ 1.03) showed the highest variation (p<0.001).