• Journal of the Korean Applied Science and Technology
• /
• v.41 no.1
• /
• pp.9-18
• /
• 2024

Smilax china is known for its excellent antimicrobial, antioxidant, and anti-inflammatory properties. As a foundational study for applying the functionality of Smilax china extracts to cosmetics, it is necessory to investigate the concentration-dependent skin permation characteristics of the flavonoids in the extract, namely quercetin, catechin, and naringenin. Therefore, it serves as a crucial method for conducting this basic research on the functional aspects fo Smilax china extracts for cosmetic applications. This investigation focused on examining the percutaneous permeability characteristics of flavonoids originating from Smilax china. Applying Marzulli's definition, the Kp value of quercetin was categorized as "fast" at 0.1 mg/mL and "moderate" at 0.2 and 0.4 mg/mL. Notably, the permeation rate exhibited a decline with increasing concentration. For naringenin, Flux values were 0.69, 1.07, and 1.42 ㎍/hr/cm² at concentrations of 0.1, 0.2, and 0.4 mg/mL, respectively, with corresponding Kp values of 6.95, 5.34, and 3.56. Naringenin's Kp value fell into the "moderate" category across all concentrations, and as observed with quercetin, the permeation rate decreased with higher concentrations. Likewise, for catechin, Flux values were 0.75, 1.09, and 1.66 ㎍/hr/cm², and corresponding Kp values were 7.55, 5.46, and 4.16. Catechin's Kp value was consistently classified as "moderate" across all concentrations. The efficacy of quercetin, catechin, and naringenin, active ingredients in high-performance and anti-inflammatory Smilax china extracts, was found to exhibit skin penetration properties above the average. This confirms their suitability as excellent natural materials for use in functional cosmetics, given their outstanding capabilities in preventing acne and reducing inflammation.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2010

Seismic reflection surveying is one of the most widely used and effective techniques for coal seam structure delineation and risk mitigation for underground longwall mining. However, the ability of the method can be compromised by the presence of volcanic cover. This problem arises within parts of the Bowen and Sydney Basins of Australia and seismic surveying can be unsuccessful. As a consequence, such areas are less attractive for coal mining. Techniques to improve the success of seismic surveying over basalt flows are needed. In this paper, we use elastic wave-equation-based forward modelling techniques to investigate the effects and characteristics of seismic wave propagation under different settings involving changes in basalt properties, its thickness, lateral extent, relative position to the shot position and various forms of inhomogeneity. The modelling results suggests that: 1) basalts with high impedance contrasts and multiple flows generate strong multiples and weak reflectors; 2) thin basalts have less effect than thick basalts; 3) partial basalt cover has less effect than full basalt cover; 4) low frequency seismic waves (especially at large offsets) have better penetration through the basalt than high frequency waves; and 5) the deeper the coal seams are below basalts of limited extent, the less influence the basalts will have on the wave propagation. In addition to providing insights into the issues that arise when seismic surveying under basalts, these observations suggest that careful management of seismic noise and the acquisition of long-offset seismic data with low-frequency geophones have the potential to improve the seismic results.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.5-9
• /
• 2014

Purpose - The purpose of this study was to compare and contrast the applicability and effectiveness of both teukyakmeip contracts of Korea and consignment contracts of the United State to demonstrate the effectiveness and practicability of teukyakmeip in Korea. These are popular contract agreements between large retailers and their suppliers and vendors. In recent years, teukyakmeip was critically examined and scrutinized by the politicians, the media, and the public of Korea. Consequently, this paper focusesheavily on identifying and analyzing different types of contract agreements between large retailers and their suppliers that currently exist in Korea and compares and contrasts those analyzed contract agreements with teukyakmeip. The article also comparesand contrasts teukyakmeip with the consignment agreements of the United States to identify similarities and differences. Research design, data, and methodology - This study is a descriptive study and has used personal interviews to collect and analyze the data. This study also fits the definition of the case study wherein it is entirely focused on investigating a real-life event: analyzing and examining contract agreements in the distribution industry. Both randomly selected management and vendor representatives from the three major department stores, Lotte, Hyundai, and Shinsegae, in Korea were interviewed between July and September 2013. The analysis of the consignment agreement was conducted based on existing secondary data. Results - Although the evidence of the abuse of teukyakmeip and consignment by large retailers from both countries clearly exists, the findings suggestthat both contract agreements would remain as the most relevant and effective legal contracts between large retailers and their suppliers. Based on the comparisonanalysis of teukyakmeip and consignment, both contracts indicated that suppliers are fully responsible for inventory and inventory management. If sales person is necessary for promoting special product, then suppliers are responsible for providing a sales person and their wages under both contracts. However, American department stores, those located outside urban area, tend to use their own employees to perform special product and sales promotion. The retailersare fully responsible for any interior or floor design or redesign of the retail store to accommodate the products from vendors under consignment; however, both suppliers and retailers share the cost of designing and redesigning the interior to accommodate vendors'products under teukyakmeip. Suppliers are responsible for pricing and supplying the quantity of the products under both agreements. Both contracts allow special sales commission as long as vendors agreed. Vendors use this special commissionto introduce their new products or apply market penetration strategy. Conclusions -The findings of this study showed the changing pattern of contract agreements between large retailers and their suppliers from both countries. Furthermore, this study evidently generated policy implications of teukyakmeip which recently became the major social issue in Korea and attracted many policymakers to gain political points by criticizing the teukyakmeip system and the large retailers. The findings of the study would be valuable to policy makers in making appropriate decisions and to large retailers and vendors in making beneficial agreements. The major implication of this study is that teukyakmeip and consignment agreements include very similar or almost identical characteristics, and they are popular among department stores and suppliers. The issue of abolishing teukyakmeip in Korea needs to be examined cautiously because teukyakmeip is the best one available at the moment, and the study suggests that no one benefits from abolishing this system.

• Korean Journal of Animal Reproduction
• /
• v.26 no.3
• /
• pp.229-234
• /
• 2002

This study was carried out to investigate the general characteristics such as concentration sperm motility and abnormality of sperm on the whole epididymal semen(EWS), RSP-S(removed seminal plasma by saline) and RSP-T(removed seminal plasma by tris-buffer) semen and survival rates after freezing on motility of whole and RSP-S and RSP-T semen and extender containing 2~8% glycerol, and ability of frozen-thawed sperm to penetrate homologous oocytes. 1. The concentration, motility and abnormality of epididymal WES, RSP-S and RSP-T sperm were 4.25 $\pm$ 0.25($\times$10$^{6}$ Cells/$m\ell$), 3.85$\pm$0.20($\times$10$^{6}$ Cells/$m\ell$), 4.05 $\pm$ 0.28($\times$10$^{6}$ Cells/$m\ell$), 50.55 $\pm$ 2.75%, 67.25 $\pm$ 2.55%, 78.75 $\pm$ 3.55 and 9.45 $\pm$ 2.25%, 37.75 $\pm$ 2.10%, 24.25 $\pm$ 1.55%, respectively. 2. The survival rates of slow and rapid frozen epididymal RSP-S and RSP-T sperm were 35.00 $\pm$ 2.35%, 45.50 $\pm$ 2.15％ and 16.50 $\pm$ 3.55%, 22.55 $\pm$ 3.95%, respectively. The survival rate of epididymal WES and RSP-T sperm after freezing following dilution with tris-buffer containing 2~8% glycerol were 9.25 $\pm$ 1.55%~17.50 $\pm$ 2.50%. 3. The percentage of capacitated and acrosome-reacted sperm prier to culture for fresh and frozen -thawed epididymal RSP-T semen were 45.25 $\pm$ 5.75%, 7.06 $\pm$ 0.25%, 48.20 $\pm$ 6.80% and 13.00 $\pm$ 2.35%, 3.55 $\pm$ 0.85%, 15.50 $\pm$ 1.90%, respectively. The penetration rate the number of sperm per penetrated for fresh and frozen-thawed epididymal RSP-T sperm were 39.25 $\pm$ 4.72%, 34.24 $\pm$ 3.93% and 1.30 $\pm$ 0.33, 1.10 $\pm$ 0.50., respectively.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.3
• /
• pp.285-294
• /
• 2003

To select an appropriate sampler for the environmental monitoring survey in coastal waters of Saemangeum, Jeollabuk-do, a macrobenthic sampling was conducted in April 2002. Employed samplers were dredge (type Charcot), a semi-quantitative sampler and Smith-McIntyre (SM) and van Veen grab (VV) as quantitative ones. One haul was tried for dredge and 3 replicates (0.1 ㎡${\times}$3) for SM and W at each of 11 stations. Comparisons of sediment volume in sampler bucket and of precision of biological parameters (i.e., density, biomass, species number and diversity index, H') were made between SM and VV. Sediment volume was significantly different (SM > VV) at p-value of 0.0050 (paired t-test) and, in average, 3 replicate samples of SM and VV satisfied a precision level of 0.2 by applying 4th root transformation. Patterns of observed and expected species numbers and H' were compared. Dredge-VV samples showed higher affinity than any other pair. Several dominant species in the area were underestimated in dredge samples (e.g., polychaete Heteromastus filiformis. Aricidea assimilis etc.). Quantifying the agreement pattern of multi-species responses was accomplished by estimating correlations between similarity matrices. Correlation between dredge and VV was slightly higher, but near-per-fect matches were found in general. Different ranks and composition among principal species lists were presumably linked to the effect of penetration depth that differs among samplers. Lower level of some species' abundance in VV samples (ca. 50％ compared with those of SM) was explained in this context. It seem appropriate to regard the effect as a probable cause of relatively higher correlations in dredge-VV, Overall bio-logica1 features indicated that a better choice could be SM in situations of requiring high data quality. The others work well, however, on observing and defining faunal characteristics and their capability cannot be questionted if we do not expect a first-order quality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.66-73
• /
• 2004

As one of the typical farming practices in the sloped upland in Pyeongchang and Hongcheon area, application of piling with coarse saprolite materials has been practiced by farmers for several reasons such as reduction of damage by monocropping, better development of plant roots, and better drainage. However, adverse effect on application of coarse saprolite soil materials to environmental aspects should not be ignored. Therefore, this research was conducted to evaluate the physicochemical properties of coarse saprolite materials in upland fields in Pyeongchang area. According to particle size distribution of coarse saprolite materials, averaged gravel contents for Pyeongchang and Hongcheon county were 16.7 and 25.3%, respectively. There was no significant difference in gravel contents by soil depth, and CV values for each particle size ranged from 20 to 40%, which implied that application of coarse material with similar properties. When we compared CEC values of dressed soil with or without considering gravel content, CEC values decreased as increasing gravel contents. The penetration resistances were 0.04-7.48 MPa at the 0 to 10 cm surface soil, and 0.10 to 8.80 MPa at the depth below 11 cm. The bulk density of the soil was $1.15g\;cm^{-3}$ at the surface soil and 1.29 to $1.35g\;cm^{-3}$ at the soil depth below 10 cm. The organic matter content, cation exchange capacity, and avaliable $P_2O_5$ concentrations of soil in upland where piling with saprolite materials of Pyeongchang area applied were $12.4g\;kg^{-1}$, $7.1cmol_c\;kg^{-1}$, and $526mg\;kg^{-1}$, respectively. Cation exchange capacity was lower than that of averaged Korean upland soil, while available $P_2O_5$ concentration was relatively higher than that of averaged Korean upland, which indicated high input of various fertilizers.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.106-111
• /
• 2002

The estimation of pile bearing capacity is important since the design details are determined from the result. There are numerous ways of determining the pile design load, but only few of them are chosen in the actual design. According to the recent investigation in Korea, the formulas proposed by Meyerhof based on the SPT N values are most frequently chosen in the design stage. In the study, various static and dynamic formulas have been used in predicting the allowable bearing capacity of a pile. Further, the reliability of these formulas has been verified by comparing the perdicted values with the static and dynamic load test measurements. Also, in most cases, these methods of pile bearing capacity determination do not take the time effect consideration, the actual allowable load as determined from pile load test indicates severe deviation from the design value. The principle results of this study are summarized as follows : As a result of estimate the reliability in criterion of the Davisson method, t was showed that Terzaghi & Peck >Chin>Meyerhof > Modified Meyerhof method was the most reliable method for the prediction of bearing capacity. Comparisons of the various pile-driving formulas showed that Modified Engineering News was the most reliable method. However, a significant error happened between dynamic bearing capacity equation was judged that uncertainty of hammer efficiency, characteristics of variable, time effect etc... was not considered. As a result of considering time effect increased skin friction capacity higher than end bearing capacity. It was found out that it would be possible to increase the skin friction capacity 1.99 times higher than a driving. As a result of considering 7 day's time effect, it was obtained that Engineering news, Modified Engineering News, Hiley, Danish, Gates, CAPWAP(CAse Pile Wave Analysis Program) analysis for relation, repectively, $Q_{u(Restrike)} / Q_{u(EOID)} = 0.98t_{0.1}$ , $0.98t_{0.1}$, $1.17t_{0.1}$, $0.88t_{0.1}$, $0.89t_{0.1}$, $0.97t_{0.1}$.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.266-280
• /
• 1994

Upper-air synoptic data and surface weather elements such as temperature, relative humidity, wind speed, cloud and precipitation were analyzed in some detail to determine the characteristics of Nopsae, a foehn-like surface wind over the Youngsuh region of Central Korea. NOAA AVHRR and GMS images are also referenced to identify the distribution of clouds and precipitation to classify the tpyes of foehn over the study area. The data period examined is from 1982 until 1993 of spring and summer months from March through August. Results of the anaylsis are as follows. Warm and dry air penetration over the Younesuh region has experienced on foehn days occured between March 21 and August 10 during study perion. The mean annual number of foehn the days were 28. Foehn phenomena were prominent during March 21-25, April 5-15, May 25-June 10, and June 26-30 pentads. The intensity of the phenomena can be evaluated as the difference of daily maximum temperature and relative humidity between windward sites and leeward sites. The intensity of daily maximum temperature reached 14.5$^{\circ}C$, but most values were in the range of 5.0-7.5$^{\circ}C$ (61%). Although strong intensity of foehns usually develop in June, it is common that farmers in the region experince more aridity during the foehnday of April and May due to the transplantation of rice seedlings. Long-run foehn are not common phenomena and 55% of foehn terminate in one day, but there is a record that Nopsae persisted up to 9 days continuously. The author identified using the cloud and precipitation data out of NOAA-11, AVHRR and GMS images is that one of them has no precipitation over windward side. The available data and the results of the analysis are somewhat inadequate. Since the results imply that wave phenomenon is potentially important in terms of local surface weather and vertical momentum transport, more detailed theoretical and observational studies are necessary to clarify the mechanism and the impacts of Nopsae.