• Journal of applied mathematics & informatics
• /
• 제5권3호
• /
• pp.717-734
• /
• 1998

In the present paper is presented a new matrix pencil-based numerical approach achieving the computation of the elemen-tary divisors of a given matrix $A \in C^{n\timesn}$ This computation is at-tained without performing similarity transformations and the whole procedure is based on the construction of the Piecewise Arithmetic Progression Sequence(PAPS) of the associated pencil $\lambda I_n$ -A of matrix A for all the appropriate values of $\lambda$ belonging to the set of eigenvalues of A. This technique produces a stable and accurate numerical algorithm working satisfactorily for matrices with a well defined eigenstructure. The whole technique can be applied for the computation of the first second and Jordan canonical form of a given matrix $A \in C^{n\timesn}$. The results are accurate for matrices possessing a well defined canonical form. In case of defective matrices indications of the most appropriately computed canonical form. In case of defective matrices indication of the most appropriately computed canonical form are given.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.269-274
• /
• 1999

This paper aims to DNC application of car fuel tank die working. DNC system is consist of CAD, CAM software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.393-398
• /
• 2001

This paper aims to work process of connecting rod die using CAD/CAM/CNC systems. CAD/CAM/CNC systems are consist of CAD(MDT4.0), CAM(Z-MASTER) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for data network.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.39-43
• /
• 2001

본 논문에서는 자동차용 부품인 커넥팅 로드를 제작할 수 있는 금형제작시 생산성 향상을 위해서 CAD/CAM 시스템을 적용하였다. 사용된 CAD 소프트웨어는 MDT4.0. CAM 소프트웨어는 Z-MASTER이며 생성된 NC코드는 CNC 밀링머신에 전송되어 커렉팅 로드 금형을 자동가공 한다.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.15-21
• /
• 2011

Threelectrodes systems were used in stripping voltammetry (SW) and cyclic voltammetry (CV) instead of the expensive platinum and Ag/AgCl reference electrodes. Moreover, the electrolyte solution was used with deep seawater, which can reduce water pollution, is more eco-friendly, and has a lower cost. The analytical optimum parameters measured via CV and SW and with working ranges were obtained from 10 to 80 ug/L using fluorine immobilized on a graphite pencil electrode (FE). Under the optimum conditions, the analytical detection limit of 6.30 ug/LAu was obtained. The results of the study can be applied to diagnostic assay for natural minerals and human finger tissue.

• 대한화학회지
• /
• 제50권3호
• /
• pp.208-215
• /
• 2006

간편하게 만들어진 흑연연필심 작업전극을 사용한 순환전압전류법과 사각파형 벗김 전압 전류법으로 살충제 페니트로치온을 정량하였다. 최적분석조건을 연구한 결과 기존의 전기화학적 분석법들 보다 정밀하고 낮은 검출한계에 도달하였으며 이들 조건은 다음과 같다. 수소이온농도: 3.7 pH, 벗김 사각파형 주파수: 500 Hz, 벗김 사각파형 증폭률: 0.1V, 벗김파형 상승전위: 0.005V, 석출전위: -0.9V, 석출시간: 500초에서 벗김전압전류법과 순환전압전류법의 페니트로치온 농도 검출한계는: 6.0 ngL1 (2.164×1011 molL-1) 이었다. 상대표준편차는 10 ugL-1을 15번 반복측정하여 0.30%의 정밀도 였으며. 위 최적 조건에서 실시간 살아있는 세포에서 분석 응용하였다.

• Toxicological Research
• /
• 제28권2호
• /
• pp.123-127
• /
• 2012

Voltammetric detection of the toxic Zn ion was investigated using a fluorine-doped graphite pencil electrode (FPE). It is notable from the study that pencils were used as reference and working electrodes. In all the experiments, a clean seawater electrolyte solution was used to yield good results. The analytical working range was attained to 10 ${\mu}gL^{-1}$. The optimized voltammetric condition was examined to maximize the effect of the detection of trace Zn. The developed sensor was applied to an earthworm's tissue cell. It was found that the methods can be applicable to in vivo fluid or agriculture soil and plant science.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.502-507
• /
• 2011

A voltammetric assay of phenol ions was investigated using three electrode systems of graphite pencil working, reference and counter electrodes. Under optimum analytical parameters, square wave stripping working ranges were attained at a mili range of 10~80 mg/L and a micro range of 20~90 ug/L using seawater electrolyte. The developed sensor was applied to tap water and the human body system of a smoker. It was found that the methods can be applied to in vivo fluid or medicinal diagnosis.

• 한국응용과학기술학회지
• /
• 제30권2호
• /
• pp.197-203
• /
• 2013

The diagnostic assay of calcium ion was sought using a modified sensor with square-wave stripping voltammetry (SWSV) and cyclic voltammetry (CV). In this study, simple graphite pencil was used as working, reference, and auxiliary electrodes. By coating the working electrodes with DNA, their sensitivity was very much improved, and good results were yielded. Moreover, clean seawater was used as an electrolyte solution instead of acid and base electrolytes to lessen the expenses involved in the experiment. The analytical optimum conditions were also examined. These conditions were attained at the low detection limit of $0.6ugL^1$. After that, the results were applied to drinking water of milk contain.

• 한국응용과학기술학회지
• /
• 제30권1호
• /
• pp.139-145
• /
• 2013

The electrochemical analysis of silver ion was performed using cyclic voltammetry (CV) and square-wave (SW) stripping voltammetry, and electrode cell systems were fabricated with graphite pencil electrode (GE) of working, reference and counter electrodes. Also electrolyte was the use of sea water as electrolyte solutions instead of ionic controlled solutions. The optimum analytical conditions for the cyclic and stripping parameters were determined using GE. The results approached the microgram working ranges of SW(ug/L) and CV(ug/L) Ag, and the optimum conditions were applied to frog's tissue and the food samples.