• 한국약용작물학회지
• /
• 제10권1호
• /
• pp.24-28
• /
• 2002

작약의 양질약재 생산을 위한 기초 자료를 얻고자 건조과정중 박피시간별 절단과 무절단 그리고 열풍건조 온도를 달리하여 시험한 결과를 요약하면 다음과 같다. 박피시간이 길어질수록 건조시간은 통뿌리보다 절단한 것이 건조온도가 단축되었으며, $30^{\circ}C$에서 $60^{\circ}C$까지의 건조온도에서 건조온도가 상승할수록 온도상승의 효과는 감소하였다. 작약의 주 약용성분인 paeoniflorin 함량은 무박피 절단형태로 열풍온도 $30^{\circ}C$에서 건조한 작약이 3.48%로 가장 높은 함량을 유지하였고, 120분 박피후 통뿌리로 $60^{\circ}C$에 열풍건조한 작약은 2.29%로 건조과정중 많은 양이 손실되어 가장 낮게 나타났다. 건조작약의 외부색택은 통뿌리로 $60^{\circ}C$에서 열풍건조했을 때 흑갈색으로 변하는 정도가 가장 심했다. 따라서 작약 수확후 건조과정 중 건조시간 단축과 약효성분 그리고 색택면에서 건조전의 처리 방법은 무박피 절단형태가 장시간 박피 원형형태보다 우수한 것으로 판단된다.

• 한방안이비인후피부과학회지
• /
• 제22권2호
• /
• pp.210-222
• /
• 2009

Objectives : This study is to investigate the effect of the sasang constitutional prescription with peeling and MTS on Acne patients. Methods : We treated 81 acne patients with sasang constitutional prescription with peeling and MTS. After treatments we compared the before and after photos, and estimated by Korean Acne Grading System. Results & Conclusions : 1. Patients were comprised of 59 females and 22 males. And there were 30 adolescent and 51 postadolescent acne patients. Out of 81 acne patients, there were many 41 postadolescent female acne patients. 2. Sasang constitutional distribution was comprised of 74 Soyangin, 5 Soeumin and 2 Taeeumin 3. Yangkyuksanhwa-tang(48.1%) and Yangdokbackho-tang(40.7%) were used much in 81 acne patients. 4. Before the treatment, 92.3% of Yangkyuksanhwa-tang group and 63.6% of Yangdokbackho-tang group had mild acne symptom and acne grade mean of Yangdokbackho-tang group was higher than another groups. 5. Peeling times mean of 81 acne patients was 2.54 times and MTS times mean was 4.57 times. Acne grade was improved when peeling times were higher. 6. Before the treatment, 81 acne patients were comprised of 81.5% mild symptom and 18.5% severe symptom patients and acne grade mean was 2.75. After the treatment. there were only mild symptom patients and acne grade mean was 1.04.

• Structural Engineering and Mechanics
• /
• 제9권5호
• /
• pp.491-504
• /
• 2000

A convenient method for enhancing the strength and stiffness of existing reinforced concrete beams is to bond adhesively steel plates to their tension faces. However, there is a limit to the applicability of tension face plating as the tension face plates are prone to premature debonding and, furthermore, the addition of the plate reduces the ductility of the beam. An alternative approach to tension face plating is to bond adhesively steel plates to the sides of reinforced concrete beams, as side plates are less prone to debonding and can allow the beam to remain ductile. Debonding at the ends of the side plates due to flexural forces, that is flexural peeling, is studied in this paper. A fundamental mathematical model for flexural peeling is developed, which is calibrated experimentally to produce design rules for preventing premature debonding of the plate-ends due to flexural forces. In the companion paper, the effect of shear forces on flexural peeling is quantified to produce design rules that are applied to the strengthening and stiffening of continuous reinforced concrete beams.

• Advances in materials Research
• /
• 제8권1호
• /
• pp.1-10
• /
• 2019

Roll bonding (RB) process of bi-metal laminates as a new noble method of bonding has been widely used in the production of bimetal laminates. In the present study, asymmetric roll bonding process as a new noble method has been presented to produce Al/Cu bimetallic laminates with the thickness reduction ratios 10%, 20% and 30% together with mismatch rolling diameter ($\frac{R_2}{R_1}$) ratio 1:1, 1:1.1 and 1:1.2. ABAQUS as a finite element simulation software was used to model the deformation of samples. The main attention in this study focuses on the bonding properties of Al/Cu samples. The effect of the $\frac{R_2}{R_1}$ ratios was investigated to improve the bond strength. During the simulation, for samples produced with $\frac{R_2}{R_1}=1:1.2$, the vertical plastic strain of samples was reach the maximum value with a high quality bond. Moreover, the peeling surface of samples after the peeling test was investigated by the scanning electron microscopy (SEM).

• 한국약용작물학회지
• /
• 제7권1호
• /
• pp.27-30
• /
• 1999

작약 수확후 건조과정중 양질의 약재 생산을 위한 기초자료를 얻고자 뿌리약초 박피기를 이용하여 껍질제거시 박피시간을 달리하여 시험한 결과를 요약하면 다음과 같다. 작약근의 기계박피시 표피 부분만 제거하고 피층부분의 수량손실과 paeoniflirin 함량의 손실을 방지하기 위한 적정 기계박피시간은 1회에 $10{\sim}30$분이 었다. 작약근 부위별 paeoniflorin 함량은 박피시간이 길어질수록 감소하였고, 상위부>하위부>중위부 순으로 노두부분과 인접한 상위부가 가장 높았다. 건조 작약 절단 전에 수처리시 박피 및 수침시간이 길어질수록 paeoniflorin의 유실량이 많았고, 색도 변화는 박피시간이 길어짐에 따라 적갈색의 표피 부분이 제거되어 명도가 증가하고 총 색도가 감소하였다.

• 한방안이비인후피부과학회지
• /
• 제36권3호
• /
• pp.140-149
• /
• 2023

Objectives : The purpose of this study is to present the effect of subcision, microneedle therapy system and herbal peeling therapy which is treatment of Korean medicine to atrophic acne scar patients. Methods : We administered subcision, microneedle therapy system and herbal peeling therapy to atrophic acne scar patients and tested the results by Qualitative Global Acne Scarring Grading System and Korean Acne Grading System as well. Results : After the treatment, all of the patients showed improvements in Qualitative Global Acne Scarring Grading System and Korean Acne Grading System as well. Qualitative Global Acne Scarring Grading System of patients changed from grade 2.71±0.71 to grade 1.14±0.86 along with the change of Korean Acne Grading System from grade 1.57±0.57 to grade 1.00±0.00. Conclusions : Subcision, microneedle therapy system and herbal peeling therapy may be effective in the treatment of moderate to severe acne scars, and could be applied in clinical practice.

• 한국산림과학회지
• /
• 제6권1호
• /
• pp.37-42
• /
• 1967

이 시험(試驗) 전남(全南) 광양연습림(光陽演習林)에 있는 약(約) 40여년생(餘年生)의 리기다소나무임분(林分)에서 하계벌(夏季伐)과 동계벌(冬季伐)을 실시(實施)한 다음 조재목(造材木)에 완전박피(完全剝皮), 외피박피(外皮剝皮)(내피부재(內皮付材)) 그리고 무박피처리(無剝皮處里)를 하여 이들이 천연건조(天然乾燥)에 미치는 박피처리(剝皮處理)의 효과(効果)를 구명(究明)하기 위(爲)하여 실시(實施)되었다. 이 시험(試驗)의 결과(結果)를 요약(要約)하면 다음과 같다. (1) 완전박피재(完全剝皮材)는 대체(大體)로 내피부재(內皮付材)나 무박피재(無剝皮材)에 비교(比較)하여 속(速)히 건조(乾燥)하나 건열피해(乾裂被害)를 많이 이르킨다. (2) 하계벌(夏季伐)을 실시(實施)한 완전박피재(完全剝皮材), 내피부재(內皮付材) 및 무박피재(無剝皮材)를 비교(比較)하면 완전박피재(完全剝皮材)와 내피부재(內皮付材) 및 무박피재간(無剝皮材間)에는 차이(差異)가 인정(認定)되어도 내피부재(內皮付材)와 무박피재간(無剝皮材間)에는 차이(差異)가 없다. (3) 동계벌(冬季伐)을 실시(實施)한 경우 내피부재(內皮付材)와 완전박피재간(完全剝皮材間)에는 차이(差異)가 없어도 완전박피재(完全剝皮材) 및 내피부재(內皮付材)와 무박피재간(無剝皮材間)에는 현저(顯著)한 차이(差異)가 있었다. 따라서 내피부재(內皮付材)의 건조효과(乾燥効果)는 완전박피재(完全剝皮材)의 효과(効果)와 같다고 생각(生覺)한다. (4) 이 시험(試驗)에서 하계벌(夏季伐)의 완전박피재(完全剝皮材) 그리고 동계벌(冬季伐)의 내피부재(內皮付材) 및 완전박피재(完全剝皮材)는 모두 4개월(個月) 이내(以內)에 평형함수량(平衡含水量)에 도달(到達)한다고 예상된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권3호
• /
• pp.205-211
• /
• 1998

The purpose of this study is to evaluate shear strengthening effects of R/C beams with carbon fiber sheets. The major variables are shear reinforcement ratios, CFS strengthening ratios and strengthening methods of CFS. Following conclusions can be extracted. The shear capacity of beam strengthened with CFS is about 32~87% higher than that of beams without shear reinforcement. The strengthening effects of patch type is larger than those of strip type. The strain distribution in CFS intersected with shear crack is similar to that in stirrup and larger strain is observed in the middle of the shear span. It can be estimated that shear strength reduction factor ${\alpha}$=0.3 is appropriate for peeling effect of CFS.

• Advances in materials Research
• /
• 제9권2호
• /
• pp.99-107
• /
• 2020

Reinforced aluminum alloy base composites have become increasingly popular for engineering applications, since they usually possess several desirable properties. Recently, Warm Accumulative Roll Bonding (WARB) process has been used as a new novel process to fabricate particle reinforced metal matrix composites. In the present study, TiO₂ particles are used as reinforcement in aluminum metal matrix composites fabricated through warm accumulative roll bonding process. Firstly, the raw aluminum alloy 1060 strips with TiO₂ as reinforcement particle were roll bonded to four accumulative rolling cycles by preheating for 5 min at 300℃before each cycle. The mechanical and bonding properties of composites have been studied versus different volume contents of TiO₂ particles by tensile test, peeling test and vickers micro-hardness test. Moreover, the fracture surface and peeling surface of samples after the tensile test and peeling test have been studied versus different amount of TiO₂ volume contents by scanning electron microscopy. The results indicated that the strength and the average vickers micro-hardness of composites improved by increasing the volume content of TiO₂ particles and the amount of their elongation and bonding strength decreased significantly.

• 혜화의학회지
• /
• 제13권2호
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.