• Journal of Veterinary Clinics
• /
• v.17 no.1
• /
• pp.225-233
• /
• 2000

The aim in this study was to obtain the basic data for estimation of optimal mating time and ovulation time by finding out the relationship between vaginal cytology and reproductive hormone profiles during the estrous cycle in 36 Korea Jin-do bitches. A characteristic features of vaginal cytology during the estorous cycle were the high proportion of superficial cell, anuclear cell and erythrocyte in proestrus, superficial cell, anuclear cell and erythroucyte in estrus, parabasal cell, small and large intermediate cell and leukocytes in diestrus, and parabasal cell and small intermediate cell in anestrus, respectively. Cornification index(CI) was the high proportion in proestrus and estrus, then it was decreaed in diestrus and anestrus. It indicated that the CI was significantly high proportion in proestrus and estrus in comparison with the other phases. Plasma progesterone concentration was below 1.0ng/ml at the first day of vulval bleeding in pregnant and non-pregnat bitches, and then it was increaed slowly. When Day 0 was timed from the day that plasma progesterone concentration was first increased above 4.0ng/ml, plasma progesterone concentrations at Day 0 in pregnant and non-pregnant above 4.0 ng/ml, plasma progesterone concentrations at Day 0 in pregnant and non-pregnant bitches were $5.2{\pm}0.3ng/ml and 5.7{\pm}0.5ng/ml$$46.5{\pm}3.3 ng/ml$ in pregnant bitches and at Day 20 with $39.8{\pm}0.1ng/ml$ in nonpregnant bitches. It indicated that plasma progesterone concentration was higher in pregnant bitches than in non-pregnant bitches. Hereafter plasma progesterone concentration was decreased steadily. At Day 63 which is parturition day, plasma progesterone concentration was decreased below 1.0ng/ml with $0.8{\pm}0.2ng/ml$ in pregnant bitches whereas in the non-pregnant bitches at Day 75 were decreased below 1.0ng/ml with 40.5{\pm}0.4ng/ml$. Plasma progesterone concentrations was maintained below 1.0ng/ml during anestrus in all of them. The plasma estradiol-17 $\beta$ concentration was increased above 1.0 pg/ml at the first day of vulval bleeding and it showed a peak Day-1 with 38.2 pg/ml. Thereafter it was sharply decreased after Day 0, which was the day that plasma progesterone concentration was first increase above 4.0ng/ml, and was maintained below basal levels. In relationship between CI and reproductive hormones, plasma estradiol-17 $\beta$concentration showed a peak at Day-3 and CI showed a peak at Day-1 which was the second day after plasma estradiol-17 $\beta$ peak, and plasma progesterone concentration was first increased above 4.0ng/ml at Day 0 which was the first day after CI peak. CI was first increased above 80% at Day-6 which was the third day before plasma estradio-17 $\beta$ peak and it was maintained above 80% between Days-6 and Day 3 during 10 days, and showed above 90% at Day-3 which was the day that plasma estradiol-17 $\beta$peak and was maintained above 90% between Day-3 and Day 3 during 7 days. In conclusion, ovulation in Koran Jin-do bitches occurred at the first day after CI peak, at the third day after plasma estradiol-17 $\beta$peak and the day when plasma progesterone concentration was first increased above 4.0 ng/ml. And it was estimated that the optimal mating time was the day when the CI was maintained above 90% and plasma progesterone concentration was between 3.0~8.0ng/ml. Therefore plasma progesterone concentration measurement was used for determination of an accurate ovulation time and the optimal mating time but also vaginal cytology, which is low-priced with equipment and is the simple examination method, was reliable method for estimating estrous cycle, optimal breeding time and ovulation time in Korea Jin-do bitches.

• Journal of Ecology and Environment
• /
• v.36 no.1
• /
• pp.65-71
• /
• 2013

The concentration of airborne pollen is related to meteorological parameters. The main purpose of this study was to determine the correlation between airborne pollen and meteorological parameters in Ulsan based on sampling from 2010 to 2011. The primary factors of interest were differences in the pollen scattering start date, end date, and peak date, and the fluctuations in pollen concentration. The meteorological parameters that affected the start and peak dates of the pollen season were as follows. For Pinus and Alnus, the dates were correlated with sunshine and an increase in temperature, whereas for Quercus, the dates were correlated with increasing temperature. During the pollen season, Alnus peaked when the temperature was highest and Pinus peaked when the relative humidity was lowest. The concentration of airborne pollen was correlated with meteorological parameters during the sampling period as follows: Pinus, Alnus, and Humulus pollen concentrations were positively correlated with increasing temperature and negatively correlated with rainfall and relative humidity; Humulus pollen concentration was positively correlated with sunshine; and Quercus and Humulus pollen concentrations were positively correlated with wind speed.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.1
• /
• pp.47-53
• /
• 2008

In this study, we analyzed how ozone pollution could be differently measured and how these different measures varied year to year and across the ten most populated cities in the United States, from 1980 to 2000. Although peak values of ozone concentration have been significantly reduced in most polluted U.S. cities for the last 20 years, the annual average values of ozone concentration have not been lowered as much as peak values. Ozone concentration data for each city shows a unique pattern of distribution, central tendency, and also there is a wide variation among different ozone measures. Two different cities with the same annual mean concentration of ozone can experience very different distributions of ozone concentration within a year. Ozone measures also show a wide margin of variability as they are estimated from different ozone monitoring sites within each city. Ozone pollution statistics can be largely varied depending on the choice of measures, monitoring sites, and averaging time period. EPA's new ozone standard of 0.08 ppm averaged over an eight-hour appears to be more stringent than the current maximum ozone standard of 0.12 ppm averaged over one hour.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.381-390
• /
• 2023

In this study, the mechanical performance of concrete exposed to chloride ion penetration was investigated. And a compressive stress-strain model was presented. CaCl₂ solution was added when mixing concrete to simulate long-term chloride ion penetration, and the concentration of chlorine ions was set to 0, 1, 2, and 4 % based on the weight of the binder. To investigate the compressive stress-strain curve after the peak stress of concrete, the compressive strength was measured by displacement control. When the chlorine ion concentration was 1 %, peak stress increased, but when the chlorine ion concentration was 2 % or more, peak stress decreased. In the case of peak strain, no trend according to chloride ion concentration was observed at 7 days. At 28 days, peak strain decreased as the chloride ion concentration increased. A compressive stress-strain curve model based on the Popovics model was presented using changes in peak stress and peak strain at 28 days. Microstructure analyses were performed to investigate the cause of the decrease in mechanical performance as the concentration of chlorine ions increased. It was confirmed that as the concentration of chlorine ion increased, Friedel's salt increased and portlandite decreased.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.2
• /
• pp.283-291
• /
• 2019

Fermentation of food waste in the presence of different concentrations of salt ($Na^+$) and ammonia was conducted to investigate the interrelation of $Na^+$ and ammonia content in bio-hydrogen production. Analysis of the experimental results showed that peak hydrogen production differed according to the ammonia and $Na^+$ concentration. The peak hydrogen production levels achieved were (97.60, 91.94, and 49.31) ml/g COD at (291.41, 768.75, and 1,037.89) mg-N/L of ammonia and (600, 1,000, and 4,000) $mg-Na^+/L$ of salt concentration, respectively. At peak hydrogen production, the ammonia concentration increased along with increasing salt concentration in the medium. This means that for peak hydrogen production, the C/N ratio decreased with increasing salt content in the medium. The butyrate/acetate (B/A) ratio was higher in proportion to the bio-hydrogen production (r-square: 0.71, p-value: 0.0006). Different concentrations of $Na^+$ and ammonia in the medium also produced diverse microbial communities. Klebsiella sp., Enterobacter sp., and Clostridium sp. were predominant with high bio-hydrogen production, while Lactococcus sp. was found with low bio-hydrogen production.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.137-145
• /
• 2022

Objectives: This study aimed to identify PM₁₀ mass concentration levels and conduct peak identification during five tasks in agricultural works. Methods: We investigated five agricultural tasks in 12 farms, which were harvesting, plowing, sowing, planting, and decapitation. All samples were measured by using the portable aerosol spectrometer(PAS 1.108) and the aerosol monitor(SidePak AM520). The collected data were compared with the national PM₁₀ concentrations. They were calculated to descriptive statistics, independent t-test, or ANOVA, and the peak identification on time series graph. Results: The ten investigated farms showed no significant difference with the national PM₁₀ concentrations, but the two greenhouses(AM, 143.31, 85.16 ㎍/m³) showed significant difference(p<0.05). As a result of the peak identification, the harvesting tasks showed repeated peak occurrence with the background concentration level of about 50 ㎍/m³. For plowing and sowing tasks, the peak occurred intermittently when the working was conducted near the sampling sites. Among the five tasks, the arithmetic mean of the harvesting task was 138.84±294.71 ㎍/m³, which was significantly higher than the other tasks(p<0.05). In addition, the case of using a tractor was higher than the case of not using the tractor(p<0.05), and the driver's seat showed the highest concentration(AM, 95.81 ㎍/m³). Conclusions: Works in greenhouses might have exposure to PM₁₀, while outdoor works is similar to general atmospheric PM₁₀ concentration levels. However, there is a possibility of intermittent exposure to high concentrations of PM₁₀ depending on the characteristics of agricultural tasks.

• Journal of Biosystems Engineering
• /
• v.24 no.6
• /
• pp.479-486
• /
• 1999

A measurement method for the deposition amount of spray, using tracer and spectrophotometer was developed. Food colors was selected as tracer, because it was cheep and easily treatable. Using NIRS(Near Infrared Reflection Spectrophotometer), regression curves between absorbance spectrum and concentration of the tracer were obtained. Yellow food colors showed the peak of spectrum at 452nm, and absorbance of peak showed a tendency to increase as concentration increased. Also, the possibility of concentration control by heating was investigated.

• Journal of Wetlands Research
• /
• v.11 no.2
• /
• pp.47-54
• /
• 2009

This study was conducted to consider the characteristics of PM10(particulate matter with aerodynamic diameters less than 10 ${\mu}m$) concentration according to land-use in Busan coastal area. Fine particle is affected by emissions, geographical conditions and meteorological factors. In case industrial area, Gamjeondong(inland) PM10 concentration was higher than Noksandong(seashore) at all season except for Summer. Primary peak at Gamjeondong cleared than Noksandong in Fall and Winter. In case green area, Daejeodong(inland) PM10 concentration was higher than Dongsamdong(seashore) at all seasons. In case commercial area, primary peak occurrence time at Jeonpodong lagged one hour according to season and diurnal change of PM10 concentration at Gwangbokdong was higher than Jeonpodong in Spring. In case residential area, high PM10 concentration(80~90 ${\mu}g/m^3$) lasted for six hours during the daytime in Spring at Deogcheondong and Yongsuri(inland).

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.222-227
• /
• 2004

Under cyclic loading, the fatigue failures of welded joints occur at weld toes which induce stress concentration by weld shape. So we need to obtain the peak stress and the S-N curve to assess the fatigue strength of welded joints. However the measurement of peak stress is of high uncertainty and low reproducibility, so we use nominal stress instead in fatigue tests of welded joints. In this study, fatigue tests to obtain S-N curves and FE analyses to obtain stress concentration factors were conducted for the two types of cruciform fillet welded joints, that is, load-carrying and non load-carrying types. Then we changed the obtained S-N curves to that based on peak stress using the hot-spot stress concept. From the analyses of the S-N curves obtained, we have concluded that there is a need to develop a new method to evaluate the fatigue life.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.922-927
• /
• 2001

Single-layer green ELs was fabricated with using molecularly-dispersed Bu-PBD into poly-N-vinylcarbazole(PVK) which has low operating voltage and high quantum efficiency. A EL cell structure of glass substrate/indium-tin-oxide/PVK:Bu-PBD:C6(∼ 100nm)/Ca(20nm)/Al(20nm) was employed with variable doping concentration. The keys to obtain high quantum efficiency was excellent film forming capability of molecularly dispersed into PVK and appropriate combination of cathode for avoiding exciplex. We obtained the turn-on voltage of 4.2V and quantum efficiency of 0.52% at 0.lmol% of C6 concentration which has been improved about a factor of 50 in comparison with the undoped cell. The PL peak wavelengths wouldn\`t be turned by changing the concentration of the C6 dopant. Green EL emission peak and FWHM were 520nm and 70nm respectively. PL emission peak was obtained at 495nm.