• 한국수소및신에너지학회논문집
• /
• 제23권2호
• /
• pp.162-172
• /
• 2012

This paper presents a research about free piston linear engine (FPLE) fueled with hydrogen, in which, the numerical models are built to simulate the operation during the full stroke of the engine. Dynamic model, linear alternator model and thermodynamic model are used as the numerical models to predict piston velocity, in-cylinder pressure and electric power of FPLE. The spark timing and air gap length are changed to provide information for the prediction. Beside, the heat transfer problem is also investigated in the paper. The results of research are divided by two parts, including motoring mode and firing mode. The result of motoring mode showed that there is validation between simulation and experiment for volume and pressure in cylinder. For firing mode, by increasing spark timing, the velocity of piston, peak pressure and electric power also increase respectively. Beside, when increasing air gap length, the electric power increases accordingly while the motion of piston is not symmetric. The effect of heat transfer also observed clearly by reducing of the peak pressure, velocity of piston and electric power.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.649-653
• /
• 2006

Engine Noise is composed of the mechanical and combustion noise. The contribution of combustion noise is generally bigger than the contribution of the mechanical noise at idle condition in DI diesel engine. That noise usually makes a roughness problem at the fundamental engine order. It is difficult to remove the modulation frequency so we have to directly reduce the combustion noise. The key effect of combustion noise reducing solution is the modification of the combustion pressure profile. It is accomplished by the multiple injection method and we solved the 400Hz combustion noise and improved the sound quality at idle condition in DI diesel engine.

• 한국추진공학회지
• /
• 제13권5호
• /
• pp.15-20
• /
• 2009

분사기 배열 및 벽면 냉각 방식이 다르게 설계된 30톤급 재생냉각 두 연소기에 대한 연소시험이 수행되었다. 본 논문에서는 연소시험 결과 중 연소안정성에 대한 내용을 분석, 제시하였다. 연소안정성 평가를 위해 압력 섭동의 크기 및 SRT 결과를 검토하였으며, 두 연소기 모두 연소안정성 측면에서 매우 만족스러운 결과를 얻을 수 있었다. 압력 섭동의 RMS 값은 연소실 압력 대비 3% 미만의 값을 나타내었으며, SRT 결과에서도 외부 가진에 의한 압력 peak의 감쇠시간은 기준 감쇠시간의 10% 정도로 짧게 나타났다. 막냉각이 적용된 연소기의 경우 벽면 냉각용 분사기가 최외곽 열에 배치된 연소기에 비해 압력 섭동의 RMS 값이 감소하는 결과를 보였다.

• 오토저널
• /
• 제14권3호
• /
• pp.80-89
• /
• 1992

An experimental study of in-cylinder of flow and combustion characteristics in two gasoline engines of different intake ports which are denoted as original port and masked shroud head (MSH) ports is presented. The flows generated by the MSH and the original port are invest- igated by laser Doppler velocimeter(LDV) under steady flow and motoring (non-firing) condit -ions. Combustion characteristics with different swirl levels produced by two intake ports are analyzed by combustion pressure measurement and statistical calculation. The swirl inside the cylinder of the MSH port engine is found to be much higher than the original port, and the MSH has a large eddy motion of cylinder diameter size. Using ensemble average method to valuate engine turbulence under motoring condition, the MSH port engine is shown to have h -igher turbulence intensity than the original port, so that the effect of the MSH port on fast burn is shown. Also the cyclic variations of peak pressure and the reaching time in the MSH port are apparently reduced.

• 한국추진공학회지
• /
• 제8권2호
• /
• pp.73-84
• /
• 2004

로켓모터의 성능을 확인하기 위해 지상에서 연소시험을 수행하여 추력, 압력, 온도. 그리고 변형률 등 필요한 데이터를 계측하지만 측정된 추력은 시험대 동특성으로 인해 실제 추력과는 달리 과도진동이 포함된 왜곡된 형태를 나타낼 수 있다. 이러한 경우에는 추력 최대치나 추력 상승시간 등 로켓모터의 성능을 결정하는 값들의 정확한 값을 얻지 못할 수 있다. 따라서 본 논문에서는 이러한 추력 왜곡 현상의 원인을 분석하고 그 문제점을 해결하기 위한 이론적인 방법을 제안한다. 또한 제안된 방법을 가상 시험대에 적용하여 제안한 방법의 적용 가능성을 확인하고, 차후 실험 데이터를 이용한 추력 추정의 기본적인 방향을 제시하고자 한다.

• 오토저널
• /
• 제14권5호
• /
• pp.117-127
• /
• 1992

In this work, the possibility to diagnose valve lashes of an automotive diesel engine via cylinder head vibration/noise analysis is studied. First of all the measurement signals and conditions are selected after considering which signals and conditions are most suitable to diagonse valve lashes. Both accelerometer and microphone are used to measure cylinder head accelerations and acoustic pressure due to valve impact on cylinder head. The signals are measured in both cranking and engine firing conditions. Finally, it was found that acceleration signal obtained in engine operating condition is the most reliable signal to diagnose the valve lash condition. The valve closing angle and the peak acceleration due to valve close are chosen to analyze the valve lash condition. The measured cylinder head acceleration signals are statistically tested to derive information which are useful to judge the valve lash. In conclusion, it was found that the developed technique can be one of feasible methods to diagnose the valve conditions while the engine is in operation.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.82-88
• /
• 2009

The purpose of this paper is to provide technical background, techniques and actual diesel engine signature analysis evaluation result. Engine signature analysis(ESA) is a process for monitoring the material condition of diesel engine using external sensors, eliminating the need to periodically disassemble the engine. ESA is also used to balanced the engine. Engine balancing is the process of tuning the engine so that all cylinders carry equal load. ESA is a useful tool to non-intrusively determine the operability and performance and assessment of the material condition of internal component of a diesel engine.

• 한국음향학회지
• /
• 제39권4호
• /
• pp.322-330
• /
• 2020

본 연구에서는 미국 캘리포니아주 소재 반덴버그 공군기지(Vandenberg Air Force Base)에서 3차례 발사된 Falcon 9의 원거리장 소음에 대해 논하였다. 발사 소음은 3회 모두 롬폭(Lompoc) 도시 인근의 동일 위치에서 측정되었다. 전체 음압레벨(overall sound pressure level)은 3회 모두 유사하지만 기상조건과 관련된 차이점이 발사 초반부에 관찰되었다. 음압레벨 기준 최대 지향성은 약 65°로서 수평 정적 연소시험으로부터 얻어진 결과와 일치하였다. 세번째 발사 소음에 대하여 각 발사 단계에 따른 파형 및 스펙트럼을 분석하였다. 1단 엔진 추진 구간에서 소음의 대역폭은 시간에 따라 감소하였으나 그 크기는 모든 주파수에 걸쳐 주변 소음레벨을 상회하였다. 또한, 발사 후반부 데이터에서 관찰되는 특이 경향은 1단 엔진 정지 및 2단 로켓 점화와 연관이 있는 것으로 추정되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.133-137
• /
• 2008

추력 30톤급 액체로켓엔진 재생냉각 연소기에서 수행했던 연소시험의 결과에 대해 기술하였다. 연소기의 연소압력은 60 bar, 추진제 유량은 약 89 kg/s 그리고 노즐 팽창비는 12이다. 연소기는 분사기 헤드, 배플분사기 그리고 재생냉각 연소실 등으로 구성하였다. 연소시험은 설계점뿐만 아니라 탈설계점 등 다양한 조건에서 이루어졌다. 연소특성속도는 약 1738부터 1751 m/sec이며, 비추력은 약 253에서 270 sec 정도의 값을 얻었다. 재생냉각 연소기의 최대 연소특성속도는 혼합비 2.35에서 나타났으며 최대 비추력은 혼합비 2.5에서 나타났다.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.437-444
• /
• 2007

This paper experimentally investigates the effects of oxygen-enriched air (OEA) on the running behaviors of an LPG SI engine during both start/warm-up (SW) and hot idling (HI) stages. The experiments were performed on an air-cooled, single-cylinder, 4-stroke, LPG SI engine with an electronic fuel injection system and an electrically-heated oxygen sensor. OEA containing 23% and 25% oxygen (by volume) was supplied for the experiments. The throttle position was fixed at that of idle condition. A fueling strategy was used as following: the fuel injection pulse width (FIPW) in the first cycle of injection was set 5.05 ms, and 2.6 ms in the subsequent cycles till the achieving of closed-loop control. In closed-loop mode, the FIPW was adjusted by the ECU in terms of the oxygen sensor feedback. Instantaneous engine speed, cylinder pressure, engine-out time-resolved HC, CO and NOx emissions and excess air coefficient (EAC) were measured and compared to the intake air baseline (ambient air, 21% oxygen). The results show that during SW stage, with the increase in the oxygen concentration in the intake air, the EAC of the mixture is much closer to the stoichiometric one and more oxygen is made available for oxidation, which results in evidently-improved combustion. The ignition in the first firing cycle starts earlier and peak pressure and maximum heat release rate both notably increase. The maximum engine speed is elevated and HC and CO emissions are reduced considerably. The percent reductions in HC emissions are about 48% and 68% in CO emissions about 52% and 78%; with 23% and 25% OEA, respectively, compared to ambient air. During HI stage, with OEA, the fuel amount per cycle increases due to closed-loop control, the engine speed rises, and speed stability is improved. The HC emissions notably decrease: about 60% and 80% with 23% and 25% OEA, respectively, compared to ambient air. The CO emissions remain at the same low level as with ambient air. During both SW and HI stages, intake air oxygen enrichment causes the delay of spark timing and the increased NOx emissions.