• 한국수소및신에너지학회논문집
• /
• 제15권3호
• /
• pp.244-249
• /
• 2004

Pd catalyst have been used in hydrogenation, oxidation, and low temperature combustion reaction. Recently, it has been candidated as a possible reagents in the partial oxidation of methanol reformers of the fuel cell. Pd catalysts, even though it is very precious and expensive, catalytic functioning is good, but it still need to be improved in the matter of durability and low catalytic activity after calcination. In this study, we synthesize the improved Pd catalyst and study their chemical functioning.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.870-876
• /
• 2006

In proportion to the increase of industrial development, emission troubles were concerned as global issue. For these reasons, so many researchers and associated institutes effort to reduce pollution with new technology and various devices. As a kind of these methods, we used catalysts as a after-treatment system. At first, we made equipment of model furnace. And various catalysts were equipped at exhaust duct of combustion system, and excess air ratio(a), change cell numbers catalyst materials(Pt, Pd) were changed as experimental conditions. With these various condition, temperature. NOx, CO, HC, $CO_2$ and $O_2$ concentration were measured. As a result, NOx conversion increased with increasing of cell number in Pd catalyst. And Pt catalyst became 100% conversion at 200 and 300 cell. Also, Pt catalyst was better than Pd catalyst at a=1.5 in this condition. In addition, CO and HC concentrations were decreased at a = 1.5 with Pd catalyst.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.806-812
• /
• 2008

귀금속촉매 존재하에서 암모니아 전환반응은 배가스내의 암모니아를 처리하는데 중요한 기술이다. 과잉용액 함침법을 이용하여 $Pt-Rh/Al_2O_3$, $Pt-Rh/TiO_2$, $Pt-Rh/ZrO_2$, $Pt-Pd/Al_2O_3$, $Pd-Rh/Al_2O_3$, $Pd-Rh/TiO_2$, $Pd-Rh/ZrO_2$, $Pt-Pd-Rh/Al_2O_3$, $Pd/Ga-Al_2O_3$, $Rh/Ga-Al_2O_3$, 그리고 $Ru/Ga-Al_2O_3$의 촉매를 제조하였다. 제조된 촉매는 1/4"의 반응기에 $10,000{\sim}50,000hr^{-1}$의 공간속도 조건하에서 촉매활성능 실험을 수행하였다. 암모니아의 초기농도는 2,000 ppm (나머지는 공기)으로 유지하였다. $T_{50}$는 암모니아 전환율이 50%일 때를 나타내는 온도를, $T_{90}$은 90%의 전환율일 때의 온도를 나타낸다. 알루미나를 담지체로 사용했을때의 $T_{50}$와 $T_{90}$은 다른 담체를 사용했을때의 $T_{50}$와 $T_{90}$보다 훨씬 낮았다. Pd-Rh촉매의 경우 $Al_2O_3$를 담체로 사용하였을 때 $ZrO_2$나 $TiO_2$보다 저온 활성이 우수하게 나타났다. 황산화물의 피독실험 결과 본 연구에서는 최종적으로 $Pt-Rh/Al_2O_3$ 촉매가 다른 촉매에 비하여 우수함을 보였다. 실험결과 Pt-Rh가 암모니아 전환공정에서 유용한 촉매라는 사실을 알 수 있다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.154-159
• /
• 2005

In proportion to the increase of industrial development, emission troubles were concerned as global issue. For these reasons, so many researchers and associated institutes effort to reduce pollution with new technology and various devices. As a kind of these methods, we used catalysts as a after-treatment system. At first, we made equipment of model furnace. And various catalysts were equipped at exhaust duct of combustion system, and excess air ratio( ), change cell numbers, catalyst materials(Pt, Pd) were changed as experimental conditions. With these various condition, temperature, NOx, CO, HC, $CO_2$ and $O_2$ concentration were measured. As a result, NOx conversion were increased with increasing of cell number in Pd catalyst. And Pt catalyst were became 100% conversion at 200 and 300 cell. Also, Pt catalyst was better than Pd catalyst ${\alpha}$=1.5 in this condition. In addition, CO and HC concentrations were decreased${\alpha}$=1.5 with Pd catalyst.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.8-16
• /
• 2006

The research was conducted to characterize of Rh-Pd-Pt TWC with a double-layer washcoat for gasoline vehicle. The physical characteristics on surface of catalyst were inspected by BET, SEM and TEM. The characteristics of catalytic reaction were examined by the TPD/TPR and CO-pulse chemisorption. The catalyst $6Hx(0.35\times11\times3)$ showed superior conversion performance after hydrothermal aging process, which was due to small difference of the surface area between. the fresh and the aged catalyst. The CO-chemisorption and surface area were superior in the 600 cpsi catalyst than other catalysts, this catalyst also shown the higher conversion efficiency of the exhaust emissions. From the TPR test, the conversion performance of the aged catalyst was decreased by the agglomeration and sintering of the PM and metal oxides. From the TPD result, it was found that the NO chemisorption was happed on the bottom-layer washcoat with Pd, and the NO chemisorption was re-happened on the upper-layer washcoat with Pt and Rh in the desorption process.

• 대한화학회지
• /
• 제46권1호
• /
• pp.57-63
• /
• 2002

CTA(crude terephthalic acid)의 수소화 정제 반응이 고온의 회분식반응기에서 PdRu/CCM(carbon-carbonaceous composite material) 촉매 상에서 수행되었다. 반응 시간에 따른 In(4-CBA; 4-carboxybenzaldehyde)의 의존도가 선형성을 보임에서 수소화 정제는 1차 속도론을 따름을 알 수 있었다. 촉매량에 따른 반응 속도의 선형성에서 조사된 반응 조건은 정제 반응을 잘 대변할 수 있음을 알 수 있었다. 반응 전환율이 증가하면(4-CBA가 감소하면) 고체 및 액체의 p-toluic acid(p-tol)의 농도는 증가하였으나 벤조산(BA)의 농도는 크게 변하지 않았다. 4-CBA 농도가 대략 0.15% 이하일 때에는 PTA의 AT(alkalitransmittance)는 4-CBA농도에 반비례하며 이는 4-CBA의 수소화에 따라 발색물질도 제거 됨을 보여 준다. 4-CBA농도가 약 0.2% 이상이면 AT는 일정하였는데 이는 4-CBA 자체는 발색 효과를 가지지 않음을 보여준다. (0.3%Pd-0.2%Ru)/CCM 촉매는 0.5%Pd/C 상업 촉매에 비해 초기 활성은 낮으나, 상업 공장 반응기에서 사용한 후에는 오히려 큰 잔존 활성을 보였고 PdRu/CCM 촉매는 루테늄 함량이 약 $0.2{\sim}0.35%$ 일 때 활성의 상승효과를 보였다. PdRu/CCM 촉매는 0.5%Pd/C 상업 촉매를 대체할 가능성이 높음을 알 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.328-334
• /
• 2008

The effects of catalyst preparation on the reaction route and the mechanism of biphenol (BP) hydrogenation, which consists of a long series-reaction, were studied. Pd/C catalysts were prepared by incipient wetness method and precipitation and deposition method. The reaction behaviors of the prepared catalysts and a commercial catalyst along with the final product distributions were very different. The choice of the catalyst preparation conditions during precipitation and deposition including the temperature, pH, precursor addition rate, and reducing agent also had significant effects. The reaction behaviors of the catalysts were interpreted in terms of catalyst particle size, metal distribution, and support acidities.

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.281-283
• /
• 1993

Aromatic nitro compounds are selectively hydrogenated to the corresponding amines in high yields at room temperature and atmospheric pressure using BER-Pd catalyst without affecting ketone, ether, ester, nitrile or chloro groups also present. Especially the nitro group in 4-nitrobenzyl alcohol, methyl 4-nitrobenzyl ether and N-N-dimethyl 4-nitrobenzylamine is selectively hydrogenated with this catalyst to give the corresponding amines without hydrogenolysis of benzylic groups. And aromatic nitro compound can be reduced selectively in the presence of aliphatic nitro compound.

• 한국표면공학회지
• /
• 제34권6호
• /
• pp.545-552
• /
• 2001

Effect of ultrasonic agitation on Pd catalyst treatment was studied in metallization of ceramic boards by Cu electroless plating method.96% $Al_{2}$$O_{3}$ ceramic boards were used as substrate. In this study, the ultrasonic frequency of 28kHz was applied. In Pd catalyst, high density Pd nuclei of small size were formed during ultrasonic agitation. Density of Pd was more improved when using of ultrasonic then no stirring. In electroless plating, plating rate was in the range of 0.6~1.8$\mu\textrm{m}$/hr, which value increased with Rochelle Salts addition. Adhesion strength between ceramic boards and Cu layer was improved of 20% when using ultrasonic agitation at $30^{\circ}C$ ,5min.

• 한국의류학회지
• /
• 제27권7호
• /
• pp.843-850
• /
• 2003

Cu/PET film composites were prepared by electroless copper plating method. In order to improve adhesion between electroless plated Cu layer and polyester (PET) film, the effect of pretreatment conditions such as etching method, mixed catalyst composition were investigated. Chemical etching and plasma treatment increased surface roughness in decreasing order of Ar＞HCl＞O$_2$＞NH$_3$. However, adhesion of Cu layer on PET film increased in the following order: $O_2$＜Ar＜HCl＜NH$_3$. It indicated that appropriate surface roughness and introduction of affinitive functional group with Pd were key factors of improving adhesion of Cu layer. PET film was more finely etched by HCI tolution, resulting in an improvement in adhesion between Cu layer and PET film. Plasma treatment with NH$_3$produced nitrogen atoms on PET film, which enhances chemisorption of Pd$^{2+}$ on PET film, resulting in improved adhesion and shielding effectiveness of Cu layer deposited on the Pd catalyzed surface. Surface morphology of Cu plated PET film revealed that Pd/Sn colloidal particles became more evenly distributed in the smaller size by increasing the molar ratio of PdCl$_2$; SnCl$_2$from 1 : 4 to 1 : 16. With increasing the molar ratio of mixed catalyst, adhesion and shielding effectiveness of Cu plated PET film were increased.d.