• 제목/요약/키워드: Pb(Ni,Nb)$O_{3}$-Pb(Zr,Ti)$O_3$

검색결과 109건 처리시간 0.023초

고출력 압전트랜스포머용 PNW-PMN-PZT 세라믹스의 제조 Process에 따른 압전 특성 (Piezoelectric properties of PNW-PMN-PZT ceramics for High power Piezoelectric transformer with Manufacturing process)

  • 황상모;이정선;류주현;박창엽;김종선;유충식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 추계학술대회 논문집
    • /
    • pp.238-241
    • /
    • 2000
  • In this paper, we manufactured Pb($Ni_{1/2}$ $W_{1/2}$)$O_3$-Pb($Mn_{1/3}$$Nb_{2/3}$)$O_3$-Pb($Zr_3$Ti)$O_3$ceramics with variation of milling time and investigated its dielectric and piezoelectric properties. Density was increased with the increase of milling time because the sinterability of specimens were improved with the decrease of particle size. The highest value of electromechanical coupling factor was 0.518 at milling time 5hour. The highest values of mechanical quality factor and dielectric constant were 1566, 1590 at milling time 4hour, respectively.

  • PDF

기반암에 따른 나주지역 하상퇴적물의 지구화학적 특성 (Geochemical Characteristics of Stream Sediments Based on Bed Rocks in the Naju Area, Korea)

  • 박영석;김종균;정용화
    • 한국지구과학회지
    • /
    • 제27권1호
    • /
    • pp.49-60
    • /
    • 2006
  • 본 연구는 나주지역 하상퇴적물에 대한 지구화학적 특성 연구이다. 이를 위해 1차 수계를 대상으로 139개의 하상퇴적물 시료를 채취하였다. 채취된 시료는 실험실에서 자연 건조시켰으며, XRF, ICP-AES, NAA를 이용하여 화학분석을 실시하였다. 기반암에 따른 지구화학적 특성을 알아보기 위하여, 화강암질편마암 지역, 편암류 지역, 화강암류 지역, 사질암 지역, 응회암 지역, 안산암 지역, 유문암 지역으로 분류하였다. 나주지역 하상퇴적물의 지질집단별 주성분원소 평균함량은 $SiO_2\;58.37{\sim}66.06wt.%,\;Al_2O_3\;13.98{\sim}18.41wt.%,\;Fe_2O_3\;4.09{\sim}6.10wt.%,\;CaO\;0.54{\sim}1.33wt.%,\;MgO\;0.86{\sim}1.34wt.%,\;K_2O\;2.38{\sim}4.01wt.%,\;Na_2O\;0.90{\sim}1.32wt.%,\;TiO_2\;0.82{\sim}1.03wt.%,\;MnO\;0.09{\sim}0.15wt.%,\;P_2O_5\;0.11{\sim}0.18wt.%$이다. 주성분원소의 평균함량 비교에서 $Al_2O_3$$K_2O$는 화강암질편마암 지역에서, $Fe_2O_3,\;CaO,\;P_2O_5$는 응회암 지역에서, MgO와 $TiO_2$는 안산암 지역에서, $Na_2O$는 유문암 지역에서 높고, $SiO_2$와 MnO 함량은 사질암 지역에서 약간 높다. 미량성분 및 희토류원소의 지질집단별 평균함량은 $Ba\;1278{\sim}1469ppm,\;Be\;1.1{\sim}1.5ppm,\;Cu\;18{\sim}25ppm,\;Nb\;25{\sim}37ppm,\;Ni\;16{\sim}25ppm,\;Pb\;21{\sim}28ppm,\;Sr\;83{\sim}155ppm,\;V\;64{\sim}98ppm,\;Zr\;83{\sim}146ppm,\;Li\;32{\sim}45ppm,\;Co\;7.2{\sim}12.7ppm,\;Cr\;37{\sim}76ppm,\;Cs\;4.8{\sim}9.1ppm,\;Hf\;7.5{\sim}25ppm,\;Rb\;88{\sim}178ppm,\;Sc\;7.7{\sim}12.6ppm,\;Zn\;83{\sim}143ppm,\;Pa\;11.3{\sim}37ppm,\;Ce\;69{\sim}206ppm,\;Eu\;1.1{\sim}1.5ppm,\;Yb\;1.8{\sim}4.4ppm$이다. Pb, Li, Cs, Hf, Rb, Sb, Pa, Ce, Eu, Yb 평균함량은 화강암질편마암 지역에서, Ba, Co, Cr 평균함량은 편암류 지역에서, Nb, Ni, Zr 평균함량은 사질암 지역에서, Sr 평균함량은 응회암 지역에서 높고, Be, Cu, V, Sc, Zn 평균함량은 안산암 지역에서 다른 지질집단에서 보다 높다.

PNN 치환량에 따른 저손실 저온소결 PMN-PNN-PZT 세라믹스의 압전 및 유전특성 (Piezoelectric and Dielectric Characteristics of Low Loss Low Temperature Sintering PMN-PNN-PZT Ceramics with the amount of PNN Substitution)

  • 류주현;김국진;정영호;이수호
    • 한국전기전자재료학회논문지
    • /
    • 제20권9호
    • /
    • pp.766-770
    • /
    • 2007
  • In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, $0.07Pb(Mn_{1/3}Nb_{2/3})O_3-xPb(Ni_{1/3}Nb_{2/3})O_3-(0.93-x)Pb(Zr,Ti)O_3$ ceramics system were fabricated using $Li_2CO_3-Bi_2O_3-CuO$ sintering aids and the specimens were sintered at $930^{\circ}C$. Thereafter, their piezoelectric and dielectric characteristics were investigated according to the amount of PNN substitution. At 9 mol% PNN substitution, density, electromechanical coupling factor ($k_p$), dielectric constant, mechanical quality factor ($Q_m$) and piezoelectric constant ($d_{33}$) showed the optimum value of $7.86g/cm^3$, 0.60, 1640, 1323 and 387 pC/N, respectively. It is considered that these values are suitable for piezoelectric divece application such ad multilayer piezoelectric actuator and ultrasonic vibrator with pure Ag internal electrode.

PNN-PT-PZ계 압전세라믹스의 저온소결에 미치는 flux의 영향 (Effect of flux on low temperature sintering for PNN-PT-PZ piezoelectric ceramics)

  • 이기태;남효덕
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제6권6호
    • /
    • pp.537-544
    • /
    • 1993
  • 기본조성이 0.5[Pb(Ni$_{1}$3/Nb$_{2}$3/)O$_{3}$]-0.5[0.65PbTiO$_{3}$ -0.35PbZrO$_{3}$] (PNN-PT-PZ)인 압전세라믹스를 NaCl-KCI를 사용한 flux의 양 및 소결온도에 따른 생성반응과 소결특성, 유전 및 압전특성을 조사하였다. 이때 1몰의 산화물에 대한 flux의 양은 0.1, 2 및 5mole로 하였으며 소결온도는 1000-1200.deg.C로 하였다. 본 연구의 flux법은 고상반응법에 비해 낮은 하소온도에서 pyrochlore상을 현저히 줄일수 있었으며 고상반응법보다 낮은 온도에서 치밀화가 이루어질뿐 아니라 유전 및 압전특성을 개선할 수 있었으며 소결온도도 낮출 수 있었다. Flux의 양이 증가할수록 결정의 입성장이 빨랐으며 유전 및 압전특성이 가장 좋은 flux의 첨가량의 조건은 1mole이었다.

  • PDF

PNN-PT-PZ계 압전세라믹스의 전기적 특성에 미치는 Pyrochlore 상의 영향 (Effect of Pyrochlore Phase on Electric Properties for PNN-PT-PZ Piezoelectric Ceramics)

  • 이기태;남효덕
    • 한국세라믹학회지
    • /
    • 제31권9호
    • /
    • pp.1030-1036
    • /
    • 1994
  • The ceramics in the system 0.5[Pb(Ni1/3Nb2/3)O3]-0.5[0.65PbTiO3-0.35PbZrO3] were prepared by conventional solid state reaction method, double calcined method (columbite precursor method) and flux method using NaCl-KCl. Amount of pyrochlore phase for the calcined powders, sintering charateristrics, dielectric and piezoelectric properties were then investigated. Sintering temperature was 1000~120$0^{\circ}C$ and in case of flux method, the amount of flux to oxide was 1 : 1 mole ratio. The dielectric and piezoelectric properties of ceramics prepared by double calcined method and flux method were found to be better than those by conventional method. It was also possible to lower sintering temperature and reduce the amount of pyrochlore phase either by double calcined method or flux method. But with increasing sintering temperature, the difference in characteristrics due to diffrent fabrication method gradually.

  • PDF

NiO 첨가가 PNN-PZT계 세라믹스의 소결 온도 및 압전 특성에 미치는 영향 (NiO Effects on Sintering Temperature and Piezoelectric Properties of PNN-PZT)

  • 정지현;김성진;박은혜;류성림;권순용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.323-323
    • /
    • 2010
  • PNN-PZT계 세라믹스를 $Pb(Ni_{1/3}Nb_{2/3})_{0.4}(Zr_{0.48}Ti_{0.52})_{0.6}O_3$ 조성으로 설계하고, 이에 낮은 융점의 NiO를 1wt% 첨가하여 저온소결 특성을 평가하였다. 일반적인 세라믹 분말 소결법을 이용하여 시편을 제작하였으며, 이때의 소결온도는 $850{\sim}105^{\circ}C$ 범위에서 변화시켰다. 소결체의 압전 및 유전적 특성을 평가를 하고. SEM 및 XRD를 이용한 미세구조 및 상 분석도 수행하였다. 이러한 실험 결과, PNN-PZT 세라믹은 NiO의 첨가로 $1000^{\circ}C$ 정도에서도 저온소결이 가능한 것을 확인하였다.

  • PDF

입자 크기가 PZT계 압전 후막의 물성에 미치는 영향 (Effects of Particle Size on Properties of PZT -Based Thick Films)

  • 김동명;김정석;천채일
    • 한국세라믹학회지
    • /
    • 제41권5호
    • /
    • pp.375-380
    • /
    • 2004
  • 알루미나 기판 위에 Pb(Ni$_{1}$3/Nb$_{2}$3/)O$_3$-PbZrO$_3$-PbTiO$_3$ 후막을 스크린 인쇄한 후 800∼100$0^{\circ}C$에서 소결하여 압전 후막을 제조하였다. 마모 밀과 볼 밀 분쇄법을 이용하여 입자 크기가 서로 다른 압전 분말을 제조하였으며, 압전 분말의 입자 크기가 후막의 미세구조와 전기적 성질에 미치는 영향을 조사하였다. 마모 밀링한 분말의 평균 입자 크기는 0.44 $\mu\textrm{m}$로 볼 밀링한 분말의 평균 입자 크기, 2.87 $\mu$m 보다 훨씬 작았다. 후막을 80$0^{\circ}C$에서 소결하였을 때는 마모 밀링한 분말로 제조한 후막의 입자 크기가 볼 밀링한 분말로 제조한 후막의 입자 크기보다 더 작았으며, 소결 온도가 증가함에 따라 그 차이가 점차 감소하였다. 그리고, 전체 소결 온도 구간에서 마모 밀링한 분말로 제조한 후막이 볼 밀링한 분말로 제조한 후막보다 균일하고 치밀한 미세구조를 보였다. 소결 온도가 90$0^{\circ}C$ 이상일 때, 마모 밀링한 분말로 제조한 후막이 볼 밀링한 분말로 제조한 후막보다 우수한 전기적 성질을 가졌다. 90$0^{\circ}C$에서 소결한 마모 밀링한 분말로 제조한 후막의 유전상수($\varepsilon$$_{r}$), 잔류분극(P$_{r}$), 항전계(E$_{c}$)는 각각 559, 16.3 $\mu$C/$cm^2$, 51.3 kV/cm이었다.다..

역사시대에 분화한 백두산 화산재의 화학 성분 (Geochemical Composition of Volcanic Ash from Historical Eruptions of Mt. Baekdu, Korea)

  • 윤성효;고정선;장철우
    • 암석학회지
    • /
    • 제27권1호
    • /
    • pp.37-47
    • /
    • 2018
  • 백두산에서 역사시대에 분화한 화산재의 시료에 대하여 다양한 방법으로 주성분과 미량성분을 분석하였다. 화산재의 주성분 원소 함량은 $SiO_2$ 58.8~71.1 wt.%, $Al_2O_3$ 9.6~16.8 wt.%, ${Fe_2O_3}^T$ 4.5~6.9 wt.%, MgO 0.1~1.7 wt.%, CaO 0.3~1.6 wt.%, $Na_2O$ 5.2~6.3 wt.%, $K_2O$ 4.3~5.9 wt.% 그리고 $TiO_2$ 1.2 wt.%이하로 분석되었다. Ba, Cu, Cr. Co, Ni, Sr, V, Zn와 Zr을 포함하는 32개 미량원소가 분석되었는데, 이들 화산재는 일부 미량원소와 경희토류 원소의 부화정도에 따라 두 그룹(그룹 A, 그룹 B)으로 구분되며, 그룹 A에는 1천년 전의 밀레니엄 분화물, 1668년과 1903년 분화물이, 그룹 B에는 1702년 분화물이 해당된다. 중금속원소인 Cu, Co, Zn, Mn 등은 소량 함유되어 나타난다. 백두산 화산재는, 섭입대 기원의 일본 사쿠라지마 화산의 화산재와 비교하여, 미량성분원소 중 Y, Nb, Pb, U, Sc, V, Ni 그리고 Cu 함량은 낮게 나타나며, Zr, Ba, Hf, Cr, Co, Zn 그리고 희토류(Eu제외) 등은 높은 함량을 나타낸다.

Actuator용 전왜재료의 특성개선을 위한 압전재료의 첨가효과 (The Effect of Piezoelectric Ceramic for Properties Improvement at Electrostriction Ceramic)

  • 이수호;조현철;김한근;손무현;사공건
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 추계학술대회 논문집
    • /
    • pp.206-210
    • /
    • 1997
  • In the fields of the optics, precise machine, semiconductors, the micro-positioning actuators are required for the control of position in the submicron range. PNN-P2N-PZT ceramics were fabricated with various mole ratio of the PZT[Pb(Zr$_{1}$2//Ti$_{1}$2)O$_3$]. PNN (Pb(Ni$_{1}$3/Nb$_{2}$3/)O$_3$]and PZN[Pb(Zn$_{1}$3//Nb/sbu 2/3/)O$_3$] powders prepared by double calcination and PZT powders prepared by molten- salt synthesis method. The relative permittivity of specimen with PZT 0.3 mole ratio was shown 5,320 and appeared the relaxor ferroelectric feature. The maximum Piezoelectric coefficient d$_{31}$ to be used for evaluation the displacement of piezoceramics in PNN-PZN-PZT ceramics was 324$\times$10$^{-12}$ (C/V) at the vicinity of morphotropic phase boundary and was larger than that of solid PZT ceramics(120$\times$10$^{-12}$ C/V).

  • PDF

합성방법과 소결 온도가 PZNN-PZT 압전 세라믹스 소재특성에 미치는 영향 (Effects of the Mixing Method and Sintering Temperature on the Characteristics of PZNN-PZT Piezoelectric Ceramic Materials)

  • 김소원;정용정;이희철
    • 한국분말재료학회지
    • /
    • 제25권6호
    • /
    • pp.487-493
    • /
    • 2018
  • The impact of different mixing methods and sintering temperatures on the microstructure and piezoelectric properties of PZNN-PZT ceramics is investigated. To improve the sinterability and piezoelectric properties of these ceramics, the composition of $0.13Pb((Zn_{0.8}Ni_{0.2})_{1/3}Nb_{2/3})O_3-0.87Pb(Zr_{0.5}Ti_{0.5})O_3$ (PZNN-PZT) containing a Pb-based relaxor component is selected. Two methods are used to create the powder for the PZNN-PZT ceramics. The first involves blending all source powders at once, followed by calcination. The second involves the preferential creation of columbite as a precursor, by reacting NiO with $Nb_2O_5$ powder. Subsequently, PZNN-PZT powder can be prepared by mixing the columbite powder, PbO, and other components, followed by an additional calcination step. All the PZNN-PZT powder samples in this study show a nearly-pure perovskite phase. High-density PZNN-PZT ceramics can be fabricated using powders prepared by a two-step calcination process, with the addition of 0.3 wt% MnO2 at even relatively low sintering temperatures from $800^{\circ}C$ to $1000^{\circ}C$. The grain size of the ceramics at sintering temperatures above $900^{\circ}C$ is increased to approximately $3{\mu}m$. The optimized PZNN-PZT piezoelectric ceramics show a piezoelectric constant ($d_{33}$) of 360 pC/N, an electromechanical coupling factor ($k_p$) of 0.61, and a quality factor ($Q_m$) of 275.