• Korean Journal of Agricultural and Forest Meteorology
• /
• v.26 no.3
• /
• pp.199-207
• /
• 2024

Measuring and estimating methane (CH₄) emissions accurately is important in rice paddy field. For reliable estimation, diurnal and seasonal variations of methane must be tracked, and measured frequently. The closed chamber method proposed according to the IPCC guidelines is relatively cheap and easy to move, so it is widely used, but it is difficult to estimate accurate methane emissions due to spatiotemporal constraints such as sampling time and number of measuring times. In this paper, the diurnal variation pattern was analyzed by measuring methane emissions four times at two-hour intervals throughout the day during the rice growth stage. When the emissions for each time period were converted to a daily time-weighted average, the diurnal average methane flux appeared in the time periods of 8:00~12:00 and 16:00~20:00. Through our results, we hope to provide useful information about determining reasonable times of methane measurement to researchers who measure methane emissions in rice paddy fields using the closed chamber method in the future.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.644-654
• /
• 2016

Supervised residue trials for mandipropamid in Korean cabbage(Brassica campestris L.) were conducted to establish its pre-harvest residue limit (PHRL), a criterion to ensure the safety of the terminal pesticide residue during cabbage production. Tissues of Korean cabbage were collected at 0, 1, 3, 5, 7, and 10 days after mandipropamid application and subjected to residue analysis. The analytical method was validated by recoveries ranging from 88.2-92.2% at two levels (0.4 and $2.0mg{\cdot}kg^{-1}$), and a limit of quantitation (LOQ) of $0.04mg{\cdot}kg^{-1}$. Mandipropamid residues in Korean cabbage gradually decreased over time. The dissipation rate of the residue would be affected by intrinsic degradation of the compound along with dilution resulting from the fast growth of Korean cabbage. The decay pattern was well fitted by simple first-order kinetics. Biological half-lives of mandipropamid in Korean cabbage ranged from 3.9-4.0 days in two field conditions. Calculated by the regression curve of mandipropamid dissipation, the PHRLs of mandipropamid in Korean cabbage were recommended as 11.07-12.19 and $5.76-6.05mg{\cdot}kg^{-1}$ for 10 and 5 days prior to harvest, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.699-708
• /
• 2017

The service industry, as a new growth engine, has become more important in response to changes in the global economy and the industrial environment. Developed countries have promoted the competitiveness of the service industry and have enhanced economic added value. Developing new services requires extensive resources. Therefore, cooperation and network building capabilities with customers, suppliers, and various knowledge creation agencies are critical sources of competitiveness. This study classified the Korean service industry by industrial type in order to enhance innovation competence.The Korean service industry lags behind that of developed countries, and this study analyzed the differences of innovation results according to collaboration partners by the classified industry. By adopting a method that applies industrial classification by Dialogic's innovation pattern, this study showed external cooperation results were different by industrial type. Analysis results revealed that companies cooperate with customers and competitors in many cases; however, product innovation was higher for companies that collaborated with private service companies. In the 'Innovation in services' industry, industry cooperation with universities showed organizational innovation achievements. In the 'Innovation through services' industry, cooperation with customers positively affected marketing innovation achievements. Consequently, the need to foster consulting firms and universities that can professionally collaborate with companies is implied in order to enhance the Korean service industry.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.57-65
• /
• 2018

This study adopts high resolution 3D X-ray CT imaging technique to visualize and evaluate the internal structure of experimentally frozen soils. Temperature and elastic wave velocity are also measured during the freezing process. The X-ray images of frozen specimens reveal that no changes in internal structure are observed for sand specimen, whereas systematic growth pattern of pore ice is observed within clay specimen. The freezing patterns are then quantified by a set of X-ray images with the aid of two-point correlation method by computing characteristic length Lr. The results reveal that characteristic length for pore ice freezing pattern in clay linearly increases with respect to the distance from the cooling source, so that Lr at the bottom layer is 2.5 times greater than the top layer when freezing process is completed. Furthermore, during the freezing process, local temperature differences are not observed in sand, but observed in clay specimen due to its relatively low thermal conductivity.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.553-561
• /
• 1993

In this study, thr effect of $Bi_2O_3$ and BN addition as grain boundary modifiers on sintering and electrical properties of semiconducting PTCR(Positive Temperature Coefficient of Resistivity) mate rial were analyzed using TMA, XRD and Complex Impedance Spectroscopy method. Bismut.h Ox~de and Boron Nitride were added to Y-doped $BaTiO_3$ respectively. Bismuth sesquioxide up to O.lmol%solubil~ ty limit of $Bi_2O_3$ in Y--$BaTiO_3$ ceramics-retarded densification and grain growth, and further addition mitigated these retardation effects. The resistivity at room temperature increased with increasing amount of $Bi_2O_3$ and thus decreased the PTCR effect, probably due to the $Bi_2O_3$ segregation on the grain boundaries. From the complex ~mpedance pattern, it is known that the grain boundary resisitivity is dominant on the whole resistivity of sample. In the result of applying the defect chemistry, $Bi^{3+} \;and \; Bi^[5+}$ are substituted for Ua and Ti site, respectively. Boron nitride decomposed and formed liquid phase among the $BaTiO_3$ grains. The decomposed com~ ponents made the second phase and existed the tr~ple juntion from the result of EPMA. From the complex impendencc pattern, the gram and grain boundary resistivity were small. The grain size increased with increasing BN contents, and decreased grain boundary resistivity enhanced the PTCR effect.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.794-799
• /
• 2005

With the quantitative growth of the petroleum industry, the pipe facilities that connect each process increased significantly and the corresponding maintenance and repair costs of the pipe facilities increased as well. The diagnosis techniques to check a pipe efficiency while in operation are few in Korea, but in the advanced countries the pipe diagnosis using gramma-ray source was on-going research since 1960's. In this study, field experiments were performed to analyze the reasons for abnormal operation of the pipe connected to a distillation tower, and the degree of abnormality was estimated using a sealed gamma-ray source ($^{137}Cs$). Gamma radiation counts were measured by a detector (NaI) positioned outside the pipe-wall diametrically opposite to the gamma source. The results showed that a gas zone section's distribution pattern was different from the pattern of nearby fluid in a pipe. Th diagnosis technique using a gamma radiation source was proved to be an effective and reliable method, offering the information on the fluid distribution in pipe.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.11
• /
• pp.20-26
• /
• 1994

In this paper, we propose an algorithm on partitioning a network into several subsets where the cost of a net which connects nodes in k subsets is given as k(k-1)/2 indicating the typical pattern of complete graphs. This problem is one of generalizations for multiple-way partitioning proposed by Sanchis. $^{[5]}$ Its solution can be applied to resource allocation problem in distributed systems. The proposed algorithm expanded the algorithm of Fiduccia and Mattheyses$^{[3]}$ to handle the multiple-way partitioning simultaneously. It has time and space complexity linear to the size of the network. To evaluate the performance of the proposed algorithm, we implemented also a traditional cluster growth method which groups connected nodes for nets, and compared experimental results with those of the proposed algorithm. The proposed algorithm shows some enhancement made.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.3
• /
• pp.16-20
• /
• 2004

YB $a_2$C $u_3$$O_{7-x}$ (YBCO) films were deposited on (100) SrTi $O_3$ single crystal substrates by a metal organic chemical vapor deposition (MOCVD) system of hot-wall type using single liquid source. Under the condition of the mole ratio of Y(tmhd)$_3$:Ba(tmhd)$_2$:Cu(tmhd)$_2$= 1:2.1:2.9. the deposition pressure of 10 Torr. the MO source line speed of 15 cm/min. the Ar/ $O_2$ flow rate of 800/800 sccm. YBCO films were prepared at the deposition temperatures of 780∼89$0^{\circ}C$. In case of the YBCO films with 2.2 ${\mu}{\textrm}{m}$ thickness deposited for 6 minutes at 86$0^{\circ}C$. XRD pattern showed complete c-axis growth and SEM morphology showed dense and crack-free surface. The atomic ratios of Ba/Y and Cu/Ba in the film were 1.92 and 1.56. respectively. The deposition rate of the film was as high as 0.37 ${\mu}{\textrm}{m}$/min. The critical temperature ( $T_{c.zero}$) of the film was 87K. The critical current of the film was 104 A/cm-width. and the critical current density was 0.47 MA/$\textrm{cm}^2$. For the thinner film of 1.3 ${\mu}{\textrm}{m}$ thickness. the critical current density of 0.62 MA/$\textrm{cm}^2$ was obtained.d.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.6
• /
• pp.62-76
• /
• 2001

This study is to offer the basic information and materials for the restoration of the urban forest and the ecologically healthy and continuous green belt through the investigation and the analysis on the vegetation in Hwasan Park, Chonju-City. The flora of Hwasan Neighborhood park was composed of 86 families 230 genera, 261 species, 35 varieties, 1 formae or 298 Taxa. Among them, calculation of Pte-Q Index represented 0.60, Fisher's Index. Some characteristics of the plants in this area have represented such as Th-D1-R5 type in biological type, erect form(64.6%) in growth type, 30 taxa in naturalized plants. The life form spectra investigated from Hwasan neighborhood park was recognized as the following M"17.4%, N:11.4%, E:0.3%, Ch:0%, H:29.8%, G:6.7%, HH:0%, Th:34.2%. By the Z-M method 5 plant communities and 3 afforestation were recognized; Quercus variabilis community, Q.acutissima community, Q.serrata community, Sorbus alnifolia community, Pinus densiflora community, P.rigida afforestation, Robinia pseudo-acacia afforestation and Larix leptolepis afforestation. The actual vegetation map constructed on the grounds of the communities classified and other data. The pattern of successional trend of tree species might be suggested: L. leptoleipis, P. rigida and P. densifloralongrightarrowQ.variabilis and Q.acutissimalongrightarrowS.alnifolia and Q.serratalongrightarrowCarpinus tschonoskii community. Three measurements of species diversity (richness index(SR), Shannon-Wiener index(H'), evenness index(J')) and their relationship with community type were studied in the surveyed plant communities. Q.serrata community was higher in SR, H', J' than the other communities, whereas R.pseduo-acacia afforestation was low. Finally, The vegetation of the Hwasan neighborhood park must not allowed any more. Nothing ca be better than native states in preserving the ecosystems.tems.

• The Plant Pathology Journal
• /
• v.24 no.4
• /
• pp.453-460
• /
• 2008

In the course of in vitro and in vivo screening for bioherbicidal agents, a hyphomycete fungus, Myrothecium sp. F0252 was selected as a candidate for the biocontrol of weeds. The isolate was identified as Myrothecium roridum Tode ex. Fries based on the morphological characteristics and 18S ribosomal DNA sequence analysis and registered as Myrothecium roridum F0252. In order to evaluate the in vitro effect of M. roridum F0252 on germination of ladino clover and white clover (Trifolium repens L.) seeds, spore solution of the fungus was employed in two concentrations, $6.5{\times}10^6$ and $2.5{\times}10^7$ spores per mL and then inoculated to the seeds. The fungal spores inhibited the seed germination, infected the seedlings, and caused an abnormal withering and inhibition of seedling growth. In addition, when the herbicidal activity of crude ethyl acetate extract from the liquid culture was assessed on a mini-plant, duck-weed (Lemna paucicostata (L.) Hegelm.), the extract showed high inhibitory effect at the level of $12.5{\mu}g$ per mL. On the other hand, in vivo herbicidal activity of M. roridum F0252 was evaluated by a whole plant spray method. M. roridum F0252 exhibited strong and broad-spectrum herbicidal activity. The herbicidal values ranged from 95-100% against 7 weeds, including Abutilon avicennae and Xanthium strumarium, and 70-80% against Digitaria sanguinalis and Sagittaria pygmaea. When the nutritional utilization (95 carbon sources) pattern of M. roridum F0252 was investigated, it varied with water activity ($a_w$) and temperature conditions, supplying good, basic information in regard to nutritional utilization for proper cultivation and formulation. Our results showed that M. roridum F0252 might be used as a potential biocontrol agent against weedy plants.