• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.592-599
• /
• 2018

The purpose of this study is to investigate consumer needs, image sensibility and preference of bedding fabric according to size and spacing of dot pattern. 18 kinds of dot pattern fabrics were designed with different diameters(6, 8, 10cm) and distances(4, 7, 10cm) in regular arrangement of diamond figure. The subjects were 162 male and female university students. The data were analyzed by SPSS 24.0. Fabrics were assessed subjectively using a 5-point scale 17 consumer needs and 33 sensory descriptors. The most consumer's needs for bedding fabric was shown to be functionality of bedding including hygiene, touch, warmth, ease of washing and management, air permeability, and hygroscopicity. The other parameters of consumer's needs were shown to be physical property and design parameter. The results of analysis of the dimension of image sensibility for fabrics with different size and spacing of dots are derived from six factors including joyfulness, coziness, uniqueness, charm, femininity, and complexity. As a result of analysis of preference with fabric kinds, there was a significant difference in preference with fabrics. The preferred fabrics were characterized by the pattern and the base fabric being striking three-dimensionally with 1/3 twill and 3/1 twill fabric. Sensory descriptors related to joyful image and unique image were analyzed as evaluation terms that can distinguish the preferences of fabrics. Correlation analysis showed the fabrics are preferred as the difference in luminance and reflectance between the base and pattern of the fabric become larger and the spacing of patterns become closer.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.443-444
• /
• 2002

The uniformity of field oxide is critical to isolation property of device in STI, so the control of field oxide thickness in STI-CMP becomes enormously important. The loss of field oxide in shallow trench isolation comes mainly from dishing and erosion in STI-CMP. In this paper, the effect of slurries on the dishing was investigated with both blanket and patterned wafers were selected to measure the removal rate, selectivity and dishing amount. Dishing was a strong function of pattern spacing and types of slurries. Dishing was significantly decreased with decreasing pattern spacing for both slurries. Significantly lower dishing with ceria based slurry than with silica based slurry were achieved when narrow pattern spacing were used. Possible dishing mechanism with two different slurries were discussed based on the observed experimental results.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제33권11호
• /
• pp.965-978
• /
• 2006

본 논문에서는 형태소 unigram과 한국어 어절을 형성하는 형태소 범주 패턴에 기반하여 어절을 인식하는 한국어 띄어쓰기 시스템을 구현하였다. 기존에 많이 연구된 통계 정보를 이용한 띄어쓰기 모델은 비교적 짧은 시간에 쉽게 구현할 수 있는 장점이 있지만, 한국어의 형태 유형론적 특성 때문에 발생하는 (ㄱ) 자료부족 문제와 (ㄴ) 메모리 크기 문제에 효과적으로 대처하지 못한다. 본 논문은 이 두 문제를 동시에 해결하기 위해 어절을 구성하고 있는 개별 형태소의 통계 정보와 그 형태소의 범주의 통계 정보를 기반으로 하여 띄어쓰기 후보 어절들을 추천한다. 임의의 후보 어절이 최종의 띄어쓰기 단위인 어절이 될 수 있는 확률은 (ㄱ) 해당 후보 어절 내의 각 형태소 확률과 (ㄴ) 해당 후보 어절을 구성하기 위해 그 형태소의 범주가 다른 형태소 범주와 함께 형성하는 패턴 내에서 차지하는 '범주가중치'를 고려하여 구한다. 해당 '범주가중치'는 (ㄱ) 말뭉치로부터 실제로 관찰된 어절의 확률과 (ㄴ) 후보 어절 내의 개별 형태소의 확률과 (ㄷ) 그 범주 가중치에 의해 추정된 어절 확률 사이의 평균 에러(error mean)가 최저가 되는 방향으로 학습하여 얻어진다.

• 한국연초학회지
• /
• 제10권1호
• /
• pp.27-36
• /
• 1988

This experiment was tarried out to investigate the effect of plant spacing and amount of side dressing on the yield, quality and protein pattern in burley 21 and KB 101. The results obtained were summarized as follow. 1 Yield and alkaloid content are increased In high plant population and side dressing. 2 . Quality is not affected by plant population and side dressing. 3 . Nitrogen content is decreased by late growing stage. 4. The bands of burley 21 seed are fewer than KB 101 seed bands in protein pattern. 5. In protein pattern, the bands of KB 101s leave are thicker than that of burley21s leave between 18,000∼14,000 of molecular weight.

• The Journal of the Acoustical Society of Korea
• /
• 제17권4E호
• /
• pp.22-27
• /
• 1998

A modified perturbation method is proposed to optimize the beam pattern of thinned microphone arrays. Both microphone spacing and array weight are iteratively adjusted via successive perturbation to achieve an optimum beam pattern in a Dolph Chebyshev sense. To improve the sidelobe performance, an alternative perturbation with respect to microphone spacing and array weight is implemented. Also, a linear space-tapering is employed in the perturbation process. It is demonstrated that the proposed approaches successfully yield sidelobe performances comparable to that of a normal array. Computer simulation results are presented.

• 천문학회지
• /
• 제25권2호
• /
• pp.105-109
• /
• 1992

We show that spacing patterns of planets and satellites in the solar system are formulatable in a single form. It is suggested that a possible explanation for the rule might be the orbital resonance effect, which has existed at an earlier epoch of the solar (planet) system. By extrapolating the formulated spacing patterns beyond the sun-Pluto distance, we find the sun-Planet X distance falls in a range ($46{\sim}79$) A. U..

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.183-190
• /
• 2012

PURPOSES : The fundamental diagram provides basic information necessary in the analysis of traffic flow and highway operation. When traffic flow is congested, the density-flow points in the fundamental diagram are widely scattered and move in a stochastic manner. This paper investigates the pattern of density-flow point transitions and identifies car-following behaviors underlying the density-flow transitions. METHODS : From a microscopic analysis of 722 fundamental diagrams of NGSIM data, a total of 20 transition patterns of fundamental diagrams are identified. Prominent features of the transition patterns are explained by the behavior of the leader and follower. RESULTS : It is found out that the average speed and the speed difference between the leader and the follower critically determine the density-flow transition pattern. The density-flow path is very sensitive to the values of vehicle speed and spacing especially at low speed and high density such that most fluctuations in the fundamental diagram in the congested regime is due to the noise of speed and spacing variations. CONCLUSIONS : The result of this study suggests that the average speed, the speed difference between the leader and the follower, and the random variations of speed and spacing are dominant factors that explain the transition patterns of a fundamental diagram.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.202-207
• /
• 2016

Purpose: The purpose of this study is main factors (environmental conditions, pattern spacing, pattern material) that effect the ion-migration of PCB. Methods: Recently, the electronic components are becoming more high density of electronic device, so that electronic circuits have smaller pitches between the patten and more vulnerable to insulation failure. so the reliability of electric insulation of device has become an ever important issue as device contact pitches of pattern. Usually, ion-migration occurs in high temperature and high humidity environment as voltage is applied to the circuit. Under high temperature and high humidity, voltage applied electronic components respond to applied voltages by metals's electrochemical ionization and a conducting filament forms between the anode and cathode across a nonmetallic medium. This leads to short-circuit failure of the electronic component. Results: we studied ion-migration that occurs in accordance with the main factors (environmental conditions, pitches, pattern material). The PCB pattern material was made by two different types of material (free solder, OSP) for this research and pitches of pattern is 0.15mm, 0.3mm, 0.5mm. PCB was experimented in the environmental conditions (high temperature $120^{\circ}C$, high temperature and high humidity $85^{\circ}C$, 85%RH) and was analyzed for ion-migration through the experiment results. Conclusion: We confirmed that environmental condition, pitches of pattern, pattern material had effect on ion-migration of PCB.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.178-185
• /
• 1999

Six of scaled concrete circular columns were experimentally investigated for the contribution of arch action to the column lateral resistance. For this the specimens with the variation of tranverse hoop steel spacing were tested in absence of axial loading All specimens showed the flexure governing behavior pattern irrelevant to transverse hoop spacing. This indicates that the role of arch action should be understood as the intermediate mechanism causing the interaction between shear and flexural mechanisms A simple truss model was proposed to qualitatively explain this notation but further study is needed to advance its application to general columns.

• The Journal of the Acoustical Society of Korea
• /
• 제18권4E호
• /
• pp.37-42
• /
• 1999

This paper concerns a modified perturbation method and a least square approach to synthesize an optimum beam pattern of a thinned sensor array with respect to element spacing. In the modified perturbation, the antenna spacing is perturbed iteratively such that the sidelobes are equalized via a linear programming approach. The least square approach is proposed to improve the array performance for the thinned array using the fact that the number of sidelobes is more than the number of element spacings. It is demonstrated that the least square approach performs better than the modified perturbation method.