• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.13-19
• /
• 2014

Phosphoric acid was used as etching agent instead of conventional peroxide - based chemicals for forming pattern of ultra definition display. Etchant was synthesized by mixing etching agent, oxidation agent, buffer solution, and additive into solvent, deionized water. Thicknesses of copper, main metal of ultra definition display, for etching, were 10,000 and $30,000{{\AA}}$. Etch stop of good low skew for proper pattern formation has been occurred at the content ratio of phosphoric acid 60 - 64%, nitric acid 4 - 5%, additive(potassium acetate) 1 - 3%. Buffer solution(acetic acid) decreased the metal contact angle $63.07^{\circ}$ to $42.49^{\circ}$ for benefiting pattern formation. Content variations on four components (phosphoric acid, nitric acid, acetic acid, potassium acetic acid) of the etchant with storage time were within 3 wt% after 24 hrs of etching work.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.2
• /
• pp.655-666
• /
• 2017

In this paper, we study the pattern formation to a general Degn-Harrison reaction model. We show Turing instability happens by analyzing the stability of the unique positive equilibrium with respect to the PDE model and the corresponding ODE model, which indicate the existence of the non-constant steady state solutions. We also show the existence periodic solutions of the PDE model and the ODE model by using Hopf bifurcation theory. Numerical simulations are presented to verify and illustrate the theoretical results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.55-62
• /
• 2021

In order to improve fuel economy and reduce CO2, HEV adopts ISG system as a standard. This ISG system increased the electric load that the battery had to bear, and the number of starting increased rapidly. AGM Lead Acid batteries have been developed and used, but the charging time is about three times longer as the electrolyte amount control during formation must be maintained at a higher level compared to conventional lead-acid batteries. In this study, we tried to shorten the charging time by increasing the charging efficiency through the optimization of the formation pattern. In order to optimize the Formation Pattern, 10 charging steps and 6 discharging steps were applied to 16 multi steps, and the charging current for each step was controlled, and the test was conducted under 4 conditions (21 hr, 24 hr, 27 hr, 30 hr). As a result of simultaneous application of multi-step and discharge step, it was verified that minimizing the current loss and eliminating the sudden polarization during charging contributes to the improvement of charging efficiency. As a result, it showed excellent results in reducing the charging time by about 30 % with improved charging efficiency compared to the previous one.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.69-75
• /
• 1994

A very fine pattern formation process using double exposure is investigated, which can overcome the resolution limit of optical wafer stepper. The very fine pattern can be obtained by moving the edge profile of large pattern by means of moving the stepper stage. The simulation results show that the light transmittance decrease bellow 9%, and the contrast increase to 16.6% for the 0.3$\mu$m photoresist pattern exposeed by the double exposure using i-line wafer stepper. And the experimental results show that fine photoresist pattern as short as 0.2$\mu$m can be obtained without a loss of photoresist thickness. Also, it proves that the depth of focus for 0.3$\mu$m pattern is longer than $1.5\mu$m. And, the very fine negative photoresist pattern was formmed by using the double exposure technique and the image reversal process.

• Journal of Fashion Business
• /
• v.14 no.5
• /
• pp.66-77
• /
• 2010

This study aimed at examining the pattern and detailed formation of corset look which has established itself as a sort of fashion look as people began to wear underwear as part of outer garment. The study tried to present basic materials helpful for developing and creating the design and pattern of corset look. First, the collected corset look of each brand was copied and then developed. According to the result, corset look's representative silhouette turned out to be hourglass silhouette that tightened up the waist with an emphasis on expressing the beauty of the body. However, unlike corsets of the past, corsets today are being created with focus on the design rather than using lots of incision lines. Second, The bust girth of corset look items turned out to have little function to compress and deform the body like the corset of the past that was far smaller than the body. In addition, the corset style that used the lines of corset alone as motive turned out to have the larger waist girth. Third, the dismantling of collected corset look showed that the materials and formation features of corset look have become simple and that the simplification of corset look has made the items of corset look everyday clothes which can be worn practically and universally.

• Structural Engineering and Mechanics
• /
• v.50 no.5
• /
• pp.575-588
• /
• 2014

Gel materials have recently gained more attention due to its unique capability of large and reversible volumetric changes. This study explores the possibility of mimicking the pattern formation of certain natural fruits during their growing process and leaves during drying processes through the swelling and de-swelling of gel materials. This will hopefully provide certain technical explanations on the morphology of fruits and plants. We adopt the inhomogeneous field gel theory to predict the deformation configurations of gel structures to describe the morphology of natural fruits and plants. The growing processes of apple and capsicum are simulated by imposing appropriate boundary conditions and field loading via varying the chemical potential from their immature to mature stages. The drying processes of three types of leaves with different vein structures are also investigated. The simulations lead to promising results and demonstrate that pattern formation of fruits and plants may be described from mechanical perspective by the behavior of gel materials based on the inhomogeneous field theory.

• Advances in robotics research
• /
• v.1 no.1
• /
• pp.41-59
• /
• 2014

This paper deals with the problem of steering a group of mobile robots along a reference path while maintaining a desired geometric formation. To solve this problem, the overall formation is decomposed into numerous geometric patterns composed of pairs of robots, and the state of the geometric patterns is defined. A control algorithm for the problem is proposed based on the Nash equilibrium strategies incorporating receding horizon control (RHC), also known as model predictive control (MPC). Each robot calculates a control input over a finite prediction horizon and transmits this control input to its neighbor. Considering the motion of the other robots in the prediction horizon, each robot calculates the optimal control strategy to achieve its goals: tracking a reference path and maintaining a desired formation. The performance of the proposed algorithm is validated using numerical simulations.

• Wind and Structures
• /
• v.32 no.2
• /
• pp.115-126
• /
• 2021

The snow cornice mass on the formation zone had triggered avalanches which led to the loss of human life and property. Snow cornice is formed due to flow separation on the leeward side. Effect of lee slope is more prominent in the formation of snow cornices as compared to the windward slope. The analysis of wind flow pattern has been carried out to evaluate the performance of a jet roof. Computational Fluid Dynamics (CFD) analysis of wind flow over a 2D hill model was carried out using RNG based k-∈ turbulence models available in ANSYS Fluent. Effect of varying leeward hill slope (1:2 to 1:6) on flow separation for the given windward slope was observed and a critical slope of 1:4 was found at which the separation zone ceased to exist. The modification of wind flow over a hill due to the installation of jet roof was simulated. It was observed that jet roof had significantly modified the wind flow pattern around hill ridgeline and ultimately snow cornice formation had mitigated. The results of the wind flow pattern were validated with the wind data collected at the experimental site, Banihal Top (Jammu and Kashmir, India). The wind flow simulation over the hill and mitigation of cornice formation by the jet roof has been explained in the present paper.

• Journal of applied mathematics & informatics
• /
• v.15 no.1_2
• /
• pp.425-434
• /
• 2004

Pattern recognition in three dimensional image is highly sensitive to assigned value and formation of voxels (pixels for two dimension case). However, occurred while digital imaging, digitization error leads to unpredictable noises in image data. Skeletonization, a powerful tool of pattern recognition, is sensitively dependent on boundary formation. Without successful controlling of the noises, the results of skeletonization can not be allowed as a stable solution. To minimize the effect of noises affecting to boundary formation, we developed a robust processing method useful in skeletonization technique for pattern recognition. Finally, we provide rigorous test results achieved throughout simulation on analytic three dimensional image.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.169-178
• /
• 2011

The purpose of this study is to develop eco-printing method using natural dyes combined with chitosan treatment to impart various pattern effect on cotton fabric. It was examined whether tone-on-tone pattern effects could be produced by screen printing with chitosan paste and subsequently dip-dyed in natural dye bath. For polychromic colorants, fabrics were pre-mordanted and then screen printed with chitosan, while only chitosan printing treatment was applied for monochromic colorants. Color, dye uptake, washing, light and rubbing fastnesses of printed fabrics were measured in relation to the presence of chitosan printing. Pre-mordanting and chitosan printing treatment were applied to such polychromic colorants as madder, sappanwood, onion and cochineal. Also, printing pattern formation on fabrics was evaluated by differences in dye uptake and color. The results suggested that madder, onion and cochineal were effective on pattern formation. Regarding sappanwood, since dye uptake was increased only by pre-mordanting without chitosan printing treatment, there was little color difference and thus patterns were not clearly distinguished. Chitosan printing treatment tended to increase washing, light and rubbing fastnesses of dyed fabrics with polychromic colorants. Chitosan printing treatment was applied to monochromic colorants such as chlorophyll, gardenia and indigo and the effect of printing formation was examined according to the difference in dye uptake. Among monochromic dyes tried, chlorophyll was effective and chitosan printing improved washing and light fastnesses.