• 복식문화연구
• /
• 제3권1호
• /
• pp.109-124
• /
• 1995

This study is purposed to analyze the degree of content and wearing style of fur cloths in order for women to buy them effectively and to wear them contentedly. So scrutinized buying style and wearing condition of fur clothes. To show whether women's buying fur clothes are suitable for their body or not, this study was examined characteristics, sorts, method of fabrication and manufacture, buying pattern and trends of fur clothes. The conclusion from this study examining the degree of possession, decision making of buying and recognition of fur clothes are as followings: 1. When women wears fur clothes, style of fur clothes have nothing to do with their body and height, and women who are 150∼160cm tall content to fur clothes commonly. 2. Condition of buying fur clothes, many 40's women whose only husband earns family's bread belong to fur clothes, and buy them, talking with a husband. Also, according to income a month, and to the ind of a job, in case of a couple's earning family's bread together, women whose whose income is 800,000 to 1,000,000￦ level. 3. Condition of wearing fur clothes, the cause that women feel like wearing fur clothes is as following: economic stability their own pride, and contentment to wear them. Women want to wear those different from fur clothes that they possess, and half coat, because of working conveniently. As the above mention, purchasers recognite the conception of fur clothes for themselves, and buy economically them, and must wear those of which design and style are suitable for body.

• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.174-179
• /
• 2013

The study on the fabrication of iron powder from forging scales using hydrogen gas has been conducted on the effect of hydrogen partial pressure, temperature, and reactive time. The mechanism for the reduction of iron oxides was proposed with various steps, and it was found that reduction pattern might be different depending on temperature. The iron content in the scale and reduction ratio of oxygen were both increased with increasing reactive time at 0.1atm of hydrogen partial pressure. On the other hand, for over 30 minutes at 0.5 atm of hydrogen partial pressure, the values were found to be almost same. In the long run, iron metallic powder was obtained with over 90% of iron content and an average size of its powder was observed to be about $100{\mu}m$.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.81-90
• /
• 1998

NiCrAly/YSZ(8wt% Y2O3-Zro2) functionally fraded thermal barrier coating (FGC) layers on a Co-base sureralloy (HAYNESS 188) substrate were fabricated using Ar shielded single torch air plasma spraying method. Functional grading were produced with the stepwise compositional change throughout layer thinkness. Microstructural observation revealed a sucessful fabrication of NiCrAly/YSZ FGC. From the results of the curvature measurement, adhesive stength measurement and thermal shock test for the FGC, it was concluded that the optimum enhance of functionally graded coating layer thinkcess and compositional pattern exit to enhance the properties of FGC, which is closely reated to the internal residual distribution with it.

• 한국전자파학회논문지
• /
• 제8권6호
• /
• pp.636-636
• /
• 1997

본 논문에서는 그라운드면 상의 개구를 통해 마이크로스트립 패치로 결합을 일으키는 구조를 갖는 PCS 기지국용 정형 빔 배열 안테나 설계와 제작에 관하여 다룬다. 최적의 정형 빔 패턴은 안테나 합성법으로 얻어졌다. 배열된 패치들 사이에서의 결합을 고려한 배열 안테나와 급전회로는 CAD tool을 이용하여 설계되었다. 급전 회로는 최적의 정형 빔 패턴을 얻기 위해서 Wilkinson 전력 분배기를 이용하여 설계되었다. 설계 결과와 측정 결과가 비교되어진다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.165-168
• /
• 2008

본 연구에서는 철근콘크리트 구조물의 보강에 이용되는 유리섬유강화 복합재료(Glass Fiber Reinforced Polymer, GFRP) 형상에 관한 연구로서 콘크리트의 피복두께 및 FRP 보강재의 형상(Plate, Box)을 실험 변수로 하여 FRP 보강 철근콘크리트 보의 거동 평가 관한 연구를 수행하였다. 이를 위하여 본 연구에서는 T. J. Teng 등이 제안한 설계식을 이용하여 보강량을 결정하였고 기존의 FRP Plate 보강재의 성능개선을 위하여 FRP Sandwich box 보강재를 설계, 적용하여 보았다. 연구의 결과 예상과 달리 FRP Plate 보강재가 Sandwich box 보강재보다 보강효과가 우수한 것으로 조사되었으며, 이는 보강재 제작상의 한계점 및 core 재료가 너무 약하여 Sandwich box 보강재의 Top Plate와 Bottom Plate가 일체화 거동을 하지 못하여 나타난 결과로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.903-910
• /
• 1998

Ti:LiNbO$_3$ optical waveguides have been fabricated by Ti-diffusion in wet oxygen atmosphere. The fabrication conditions of furnace temperature, diffusion time and bubbler temperature were 105$0^{\circ}C$, 8 hours and 9$0^{\circ}C$, respectively and Ti thickness was varied from 700$\AA$ to 1500$\AA$. In this paper, the nearfield patterns, mode sizes (hirizontal/vertical) and insertion loss of waveguides were discussed at wavelength 1550 nm ad function of Ti thickness. With the planar waveguide, the effective index change and diffusion depth were calculated at 632.8nm using the prism coupling method. From these results, the best Ti thickness in our conditions seems like to by 1200$\AA$~1300$\AA$.

• 한국통신학회논문지
• /
• 제30권4A호
• /
• pp.312-319
• /
• 2005

본 논문에서는 5GHz 전 대역에서 사용 가능한 미앤더 형태의 마이크로스트립 안테나를 설계하고 제작하였다. 미앤더 형태의 안테나에 공기층을 삽입하고 동축 급전을 주어 VSWR<2에서 충분한 대역을 얻고자 하였다. 미앤더 라인의 길이와 폭, 동축급전의 위치 및 공기층의 두께를 변화시키면서 시뮬레이션 하였으며, 최적화된 파라미터를 가지고 안테나를 제작하였다. 제작된 안테나의 측정 결과는 VSWR<2에서 약 1GHz의 $17.5\%$의 대역폭을 얻었으며, $7.3\sim9.5$ dEi의 이득과 Broad한 방사패턴을 얻었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1110-1116
• /
• 2014

The cuprous oxide cubes with the special porous surface constructed by nano-prisms have been successfully fabricated by a solvothermal method. The template-free method is simple and facile without any surfactant. The X-ray powder diffraction (XRD) pattern suggests that the as-prepared product is the pure primitive cubic $Cu_2O$. The effects of the experimental parameters, such as the reaction temperature, reaction time and the concentration of sodium acetate anhydrous, on the morphologies of the products were investigated in detail by the scanning electron microscopy (SEM). Based on the time-dependent experiments, the possible formation mechanism was proposed. Using photocatalytic degrading reactive dyes as the model reaction and xenon lamp to simulate sunlight, the $Cu_2O$ cubes with the porous surface might possess higher photocatalytic activity than those of the commercial $Cu_2O$ powder in the visible-light region, indicating the excellent photocatalytic performance.

• 대한치과교정학회지
• /
• 제47권3호
• /
• pp.207-212
• /
• 2017

The popularity of clear overlay retainers (CORs) has increased recently because of their advantages such as better esthetics, cost effectiveness, easy fabrication, and good compliance. However, a deficiency in posterior occlusal settling is a reported limitation of CORs. The aim of this study was to evaluate the posterior occlusal contact changes in a new type of clear orthodontic retainer called Oral-treaper (OTP), which consists of three layers and has stronger mechanical characteristics than do conventional retainers. Three patients who completed fixed orthodontic treatment received OTP as a removable retainer. Cast models were fabricated after the removal of fixed appliances (T1) and after 4 to 11 months of using the retainers (T2). We evaluated all the cast models to compare the post-orthodontic settling pattern during the use of the OTPs. The depth of occlusal contacts was evaluated using color maps. The OTP did not prevent vertical settling in all patients but resulted in an improvement in posterior occlusal contact points.