• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.68-77
• /
• 2006

The heartwood of cengal (Neobalanocarpus heimii) is known to have a high degree of decay resistance by virtue of its high extractive content. After 30 years in ground contact an utility pole of this tropical hardwood was found to be degraded only in the surface layers by cavity-forming soft rot fungi. The present work was undertaken 1) to characterize the degradation of cengal heartwood from the aspect of ultrastructure and chemistry and 2) to investigate the correlation between soft rot decay and its extractive microdistribution in wood tissues. The chemical analysis of cengal heartwood revealed the presence of a high amount of extractives as well as lignin. The wood contained a relatively high amount of condensed lignin and the guaiacyl units. Microscopic observations revealed that vessels, fibers and parenchyma cells (both ray and axial parenchyma) all contained extractives in their lumina, but in variable amounts. The lumina of fibers and most axial parenchyma were completely or almost completely filled with the extractives. TEM micrographs showed that cell walls were also impregnated with extractives and that pit membranes connecting parenchyma cells were well coated and impregnated with extractives. However, fungal hyphae were present in the extractive masses localized in cell lumina, and indications were that the extractives did not completely inhibit fungal growth. The extent of cell wall degradation varied with tissue types. The fibers appeared to be more susceptible to decay than vessels and parenchyma. Middle lamella was the only cell wall region which remained intact in all cell types which were severely degraded. The microscopic observations suggested a close correlation between extractive microdistribution and the pattern and extent of cell wall degradation. In addition to the toxicity to fungi, the physical constraint of the extractive material present in cengal heartwood cells is likely to have a profound effect on the growth and path of invasion of colonizing fungi, thus conferring protection to wood by restricting fungal entry into cell walls. The presence of relatively high amount of condensed lignin is also likely to be a factor in the resistance of cengal heartwood to soft rot decay.

• Journal of Korean Academy of Nursing
• /
• v.27 no.1
• /
• pp.71-82
• /
• 1997

In this paper, the study model, which presents the patterns of how the changing mechanisms are adopted to the changing stages of smoking cessation, was developed by modifying the integrative model of Prochaska et al. (1983) with including seven changing mechanisms which were identified by Oh and Kim(1996). Then the developed study model was exploratively tested with 155 University student between 20 and 29 years of age as subjects. According to the study results. among the five mechanisms. which are significant in explaining the differences between stages. DUNCAN post-comparison showed that the least applied ones were Stimulus Control, Self Determinism, Cognitive Restructuring in the precomplation stage, and Reinforcement and Dramatic Relief. in the relapsed stage. In the comtemplation stage. it was observed that Dramatic Relief is used most frequently and that the other two mechanisms, Information Management and Cognitive Restructuring, showed different results from those inferred in the study hypothesis. In the case of Information Management, it was excluded from the analysis it was not included in explaining significant difference among changing stages, but Cognitive Reconstruction turns out to be a more frequently used mechanism in the action stage rather than in the comtemplation stage. Helping Relationship was also excluded in the post-comparison analysis since it was not included in explaining significant difference among changing stages and Reinforcement was a more frequently used mechanisms in the comtemplation stage. Stimulus Control turns out to be the connecting mechanism which was most frequently used in both the contemplation and action stages. Self Determination was most frequently used in the action stage rather than in both the comtemplation stage and action stage, differing from the presumption of the model. Lastly, subjects in the relapsed stage were utilizing Stimulus Control and Self Determination at the same level as subjects in the precontemplation stage. and the utilization of both Reinformcement and Dramatic Relief was lower than that of the precomtemplation stage, that is, at the lowest level. Only Cognitive Restructuring was used of the same level as the comtemplation stage. The relapsed stage in this study did not represent the preparation for action stage as presumed in the model of Prochaska et. al. (1983) but did show a pattern similar to the initial stage of smoking cessation. However, since this interpretation about the relapser was based on only a small number of relapsers(n=5), this conclusion may not be reliable.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.731-742
• /
• 2014

In this study, we developed a new algorithm which can construct model buildings used as a surface boundary in numerical models using GIS with latitudinal and longitudinal information of building vertices. The algorithm established the outer boundary of a building first, by finding segments passing neighboring two vertices of the building and connecting the segments. Then, the algorithm determined the region inside the outer boundary as the building. The new algorithm overcame the limit that the algorithm developed in the previous study had in constructing concave buildings. In addition, the new algorithm successfully constructed a building with complicated shape. To investigate effects of the modification in building shape caused by the building-construction algorithm on flows and pollutant dispersion around buildings, a computational fluid dynamics model was used and three kinds of building type were considered. In the downwind region, patterns in flow and pollutant dispersion were little affected by the modification in building shape caused. However, because of reduction in air space resulted from the building-shape modification, vortex structure was not resolved or smaller vortex was resolved near the buildings. The changes in flow pattern affected dispersion patterns of scalar pollutants emitted around the buildings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.833-838
• /
• 2011

RFID system in manufacturing industry is used to collect, categorize, and process the data of products. To install RFID system for a large factory, a large amount of wired data communication network is necessary for RS232 communication. If the installed location of RFID system in the factory is changed or extended, a reinstallment is required for the already installed wired data network. A large amount of time/financial reinvestment is necessary for such reinstallation. By using wireless data communication network, however, the initial installation and reinstallation are very simple. In this paper, we implemented a wireless communication system and RFID system. We used the CC1020 chip for wireless communication system and EM4095 chip for RFID system. CC1020 chip enables highly-reliable data communication, and by setting a simple status register, it can switch between transmitting/receiving status and it can choose the desired frequency of either 400 MHz or 900 MHz. Also, Communication range is 50 m, if external antenna is used. EM4095 is a chip for RFID reader system with the carrier frequency of 125 KHz. This chip can implement the reader system by connecting a small number of components. And EM4100 was used for RFID system. EM4100 is read-only type. Atmega128 is used to control a wireless communication system and RFID system. We confirm that the system can communicate without error up to 50 m from sender. In the paper, the circuit diagram and operation program for CC1020 and RFID system are presented. The system used in the experiment is shown in pictures, and the data movement pattern of CC1020 is shown in the diagram, and the performance of each transmission method is presented.

• Journal of Fashion Business
• /
• v.19 no.1
• /
• pp.62-76
• /
• 2015

The purpose of this study was to analyze and compare the shapes, colors, patterns, and hairstyles of Qipao worn by heroines that were reconstructed over times, in a Chinese TV Drama set in the 1930s and televised in 1980 and remade in 2007. We investigated how the Qipao was reinterpreted. The results were as follows. First, in televised in 1980, Qipao borrowed the characteristics of Jing Pai Qipao, which became popular in Beijing. Jing Pai Qipao was characterized by a roomy and loose silhouette that does not expose a body line, Chinese traditional 5 colors, simple plain patterns and Chinese traditional flower patterns. For hairstyle, twist and permanent wave styles that were popular in the Republican Period were very common. On the other hand, in televised in 2007, Qipao was a Hai Pai style that was very popular in Shanghai in the 1930s. Hai Pai Qipao was characterized by a tight silhouette fitted to the body, various colors such as purple and beige other than the 5 colors, Western flower patterns and modern geometric patterns. Hairstyle was changed from bang hair to a permanent wave. Second, while had a modern reinterpretation of Jing Pai Qipao that was very popular in Beijing, rather than Hai Pai Qipao that became popular in Shanghai in the 1930s, used Hai Pai Qipao that was popular in Shanghai in the 1930s. In particular, demonstrated how the mass media should reinterpret past clothing by thoroughly studying and reflecting Shanghai Qipao in the 1930s and adding viewers' aesthetic taste of 2007 without damaging an original. Moreover, it confirmed that clothing can function as language and symbol within the mass media by connecting the color and pattern of Qipao with characters' traits and the plot. It suggests that was more advanced than filmed in the 1980s. The findings of this study might provide useful data to costume designers who reinterpret costumes from a new angle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.37-43
• /
• 2017

This review investigates the basic principle of physical interactions and failure mechanisms introduced in the materials and inner parts of semiconducting components under electromagnetic pulses (EMPs). The transfer process of EMPs at the semiconducting component level can be explained based on three layer structures (air, dielectric, and conductor layers). The theoretically absorbed energy can be predicted by the complex reflection coefficient. The main failure mechanisms of semiconductor components are also described based on the Joule heating energy generated by the coupling between materials and the applied EMPs. Breakdown of the P-N junction, burnout of the circuit pattern in the semiconductor chip, and damage to connecting wires between the lead frame and semiconducting chips can result from dielectric heating and eddy current loss due to electric and magnetic fields. To summarize, the EMPs transferred to the semiconductor components interact with the chip material in a semiconductor, and dipolar polarization and ionic conduction happen at the same time. Destruction of the P-N junction can result from excessive reverse voltage. Further EMP research at the semiconducting component level is needed to improve the reliability and susceptibility of electric and electronic systems.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.1
• /
• pp.59-77
• /
• 2008

The purpose of this study is to investigate the impact of traffic-related air pollution on the urban population in the Metropolitan Seoul area. In particular, this study analyzes urban population exposure to traffic-related particulate materials(PM). For the purpose, this study examines the relationships between traffic flows and PM concentration levels during the last fifteen years. Traffic volumes have been decreased significantly in recent year in Seoul, however, PM levels have been declined less compare to traffic volumes. It may be related with the rapid growth in the population and vehicle numbers in Gyenggi, the outskirt of Seoul, where several New Towns have been developed in the middle of 1990's. The spatial pattern of commuting has changed, and thus and travel distances and traffic volumes have increased along the main roads connecting CBDs in Seoul and New Towns consisting of large residential apartment complexes. These changes in traffic flows and travel behaviors cause increasing exposure to traffic-related air pollution for urban population over the Metropolitan Seoul area. GIS techniques are applied to analyze the spatial patterns of traffic flows, population distributions, PM distributions, and passenger flows comprehensively. This study also analyzes real time base traffic flow data and passenger flow data obtained from T-card transaction database applying data mining techniques. This study also attempts to develop a space-time model for assessing journey-time exposure to traffic related air pollutants based on travel passenger frequency distribution function. The results of this study can be used for the implications for sustainable transport systems, public health and transportation policy by reducing urban air pollution and road traffics in the Metropolitan Seoul area.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.7-15
• /
• 2003

China is expected to experience rapid increase in container traffic due to the joining to WTO and the fast economic growth. However, logistics-related infrastructure such as sea port is very poor and the capacity is lagging far behind the demand, resulting in transferring around 70% of import and export cargo volume at ports in adjoining countries such as Korea, Taiwan, Hong Kong and Japan. Recently, China announced a huge project of developing an offshore port consisting of 52 berths, 30km away from Shanghai with a connecting bridge. As such plan seems to have a significant impact on the port of Pusan which tries to be a Hub port in Far East Asia, we need to scrutinize the plan. This paper, therefore, tries to examine Shanghai New Port Plan, to evaluate the feasibility and potential competitiveness, and to analyze the impact on Pusan port. For this, we review the situation of major container ports in China and the flow pattern of container traffic to and from Pusan port. We then examine the feasibility of the proposed offshore port with respect to demand and supply for container terminal, weather condition, hinterland connection and resource of investment.

• Journal of Korean Medical classics
• /
• v.22 no.3
• /
• pp.79-95
• /
• 2009

Background : Eye diseases refer to a wide range of disconveniences from conjunctivitis, pterygium, glaucoma to even blindness. Acupuncture has been widely used in Korea throughout the history and provides an efficient method in the treatment of them. Objectives : Establish a distinctive and efficient acupuncture method for the treatment of eye diseases based in literature research. Method : We reviewed four Korean medical literature, "Guide to Swollen Sore Treatment[治腫指南]", "Treasured Mirror of Eastern Medicine[東醫寶鑑]", "Experiential Prescriptions of Acupuncture and Moxibustion[鍼灸經驗方]", and "Essential Rhymes on Acupuncture and Moxibustion by Master Saam[舍岩鍼法]", and analyzed the therapeutic characteristics in the treatment of eye diseases. Result : 1. According to "Guide to Swollen Sore Treatment[治腫指南]", various methods were applied in the treatment of eye diseases. We can cite salt water washing method after needling, pricking bloodletting method using three-edged needle, surgery method using bent needle and lance needle, or sore treatment using sliced bean-curd and ground Aristolochiae Fructus among others. Acupuncture points like GV20[百會], BL1[睛明], EX-HN5[太陽], GB20[風池], GV24[神庭], GB1[瞳子髎], and GB15[臨泣] were mostly needled. 2. In "Treasured Mirror of Eastern Medicine[東醫寶鑑]", pricking bloodletting method were most frequently used in comparison to single acupuncture or moxibustion methods. Applied points were GV20[百會], BL1[睛明], LI4[合谷], EX-HN5[太陽], GB37[光明], BL18[肝兪], GB20[風池], BL2[攢竹], GB1[瞳子髎], and ST36[三里]. Also selections of adjacent points were considered important. 3. In respect to treatment methods "Experiential Prescriptions of Acupuncture and Moxibustion [鍼灸經驗方]" has some similarity to "Treasured Mirror of Eastern Medicine[東醫寶鑑]" as pricking bloodletting method were mostly used. Also focused on normal Qi flow through meridian. Points like BL18[肝兪], BL1[睛明], LU5[尺澤], EX-HN5[太陽], LI4[合谷] were used. 4. "Essential Rhymes on Acupuncture and Moxibustion by Master Saam[校勘舍岩道人鍼法]" considered visceral pattern identification method fundamental in the diagnosis and treatment of eye diseases. Specifically, Liver, Heart, Stomach, Lung, Kidney identification methods are presented. Combined both corresponding and connecting meridians supplementation and draining methods according to mother-child relation. Also Saam master's own experiential prescriptions are noted. Conclusions : After previous study on stroke, we could also find various efficient methods according to eye diseases, through literature research of korean medical classics. This study will concurrently result in establishing distinctive therapeutic method characteristic of Korea.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.38-43
• /
• 2010

The purpose of this study is to secure the basis for judgment on the cause of an accident by analyzing the melting characteristics of a blade type fuse used for vehicles due to overload. In order to increase the reliability of the test, it was conducted by connecting the electrical system with conditions similar to those of an actual vehicle to apply the load. Carbonization pattern experiment of fuse by outside flame applied Korean Standard (KS). The fuse melted by the overcurrent showed a smooth cross-section while the test terminals, clear plastic body, etc., burnt out by the external flame was badly deformed. When 185% of the rated current (27.8A) was applied to a cable of 15A rated current onto which an over-capacity fuse (20A) was installed, the fuse melting time was 217 seconds. In addition, when a load current of 28.8[A] (139%) was applied, the fuse's test terminal and terminal blade were not burnt out although foam was observed on some parts of the plastic body. When a load capacity of 28.2[A] (141%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melting time was approximately 10 seconds. When a load current of 35.8[A] (119%) was applied, the fuse's test terminal and terminal blade were not burnt out, although some parts of the plastic body was swelled. However, it was observed that the switch terminal melted if approximately six minutes lapsed under such conditions. When a load capacity of 39.4[A] (131%) was applied to a cable of 15A rated current onto which an over-capacity fuse (30A) was installed, the fuse melted in approximately 69 seconds, and the test terminal and terminal blade were not burnt.