• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.2
• /
• pp.130-139
• /
• 2013

In recent, the communication networks of wind power farm are becoming crucial technologies for monitoring and controlling the large-scale offshore wind power farm. In this paper, EPON based communication network architectures are proposed in order to combat the problems of conventional Ethernet based communication network such as delay, data processing overhead and the fairness of data transmission among turbines in offshore wind power farm. The proposed architecture constructs the point to multi-point network by using OLT and ONUs installed in central control center and wind turbines respectively. The EPON based communication network architecture has low cost, high reliability, and fair transmission capability. To evaluate the performance of proposed architectures, the wind power farm based on IEC 61850 is modelled by using OPNET The simulation results are analyzed and compared with conventional Ethernet based communication network in terms of the overhead, delay and fairness of data transmission.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.425-431
• /
• 2009

To provide fundamental educational materials for the effective management of patients with high blood pressure and diabetes in korea, and to expand the scope of such educational businesses the survey was administered between September 2007 and February 2008 to 1,213 consenting patients suffering from high blood pressure and diabetes in private medical centers within Daejeon in Korea. The patients were provided with standardized education materials and were monitored whether they were conducting a controlled management of their blood pressure and diabetes level as well as monitoring changes in their daily routine. Out of the 1,213 patients, 51.3% of the patients suffered only from high blood pressure, 26.3% suffered only from diabetes and 22.4% suffered from both high blood pressure and diabetes (Condor difference was not considered in this research). Physical education was the most commonly used education upon visitation to these medical centers, which was then followed by eating habits and weight management, respectively. The education demanded and preferred from the patients was similar to the education provided during the visitations. 56.7% of the medical doctors responded that the majority of the patients were passive in controlling and managing their illnesses. 63.7% of the participants believed that the education provided through this research was effective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7C
• /
• pp.971-984
• /
• 2004

In the coming age of information warfare, information security patterns need to be changed such as to the active approach using offensive security mechanisms rather than traditional passive approach just protecting the intrusions. In an active security environment, it is essential that, when detecting an intrusion, the immediate confrontation such as analysing the intrusion situation in realtime, protecting information from the attacks, and even tracing the intruder. This paper presents an active intrusion-confronting system using a fake session and a honeypot. Through the fake session, the attacks like Dos(Denial of Service) and port scan can be intercepted. By monitoring honeypot system, in which the intruders are migrated from the protected system and an intrusion rule manager is being activated, new intrusion rules are created and activated for confronting the next intrusions.

• Journal of Convergence Society for SMB
• /
• v.2 no.1
• /
• pp.69-75
• /
• 2012

As the global warming and climate change cause the various social problems, such as disasters, abnormal temperature and diseases, technologies and studies for energy conservation and efficiency are increased. Energy use in buildings accounted for 22% of national energy use, so energy saving technology is promoted for residence, commercial and public buildings. Existing methods for energy conservation are passive ways, in that they consider heat loss and low-energy equipment. In recent years, active technologies emerge by converging with ICT, which detect and remove the energy waste situation by measuring, monitoring and controlling the energy use. In this paper, we describe technology trends for building energy optimization and investigates issues for active energy savings.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2003

Various efforts to combine new high-tech materials with solar system have been progressed nowadays in order to improve the performance of the existing passive solar system. TIM(Transparent Insulation Material) replacing the conventional outer building envelope glazing as well as the wall is good example for this trend. TI integrated wall is a thermal mass wall with a special shaped TIM instead of using typical envelope materials The tested TIM type is a small(diameter 4mm and thickness 50mm) capillary tube of Okalux model and cement brick(density 1500kg/m3). The purpose of this study was to analyze the thermal performance through the actual measurements performed in a test cell. This study was carried out to justify the following issues. 1) the impact of Tl-wall over the temperature variations 2) the impact of mass wall surface absorptance over the transient thermal behavior and 3) the impact of thermal mass wall thickness over the temperature variations. Finally, as results indicated that the peak time of room temperature was shifted about one hour early when absorptance of thermal mass wall changed from 60% to 95% for the 190mm thickness thermal mass wall test case. the temperature difference of both surfaces of thermal mass wall surface showed about $23^{\circ}C$ during a day of March for the 380mm thickness thermal mass wall case. However, the thermal mass wall was over-heated by outside temperature and solar radiation in a day of May the temperature difference of both surfaces of thermal mass wall surface was indicated $10^{\circ}C$ and inside temperature was observed more than average 22C.

• Safety and Health at Work
• /
• v.2 no.1
• /
• pp.39-51
• /
• 2011

Objectives: This study was designed to evaluate exposure levels of various chemicals used in wafer fabrication product lines in the semiconductor industry where work-related leukemia has occurred. Methods: The research focused on 9 representative wafer fabrication bays among a total of 25 bays in a semiconductor product line. We monitored the chemical substances categorized as human carcinogens with respect to leukemia as well as harmful chemicals used in the bays and substances with hematologic and reproductive toxicities to evaluate the overall health effect for semiconductor industry workers. With respect to monitoring, active and passive sampling techniques were introduced. Eight-hour long-term and 15-minute short-term sampling was conducted for the area as well as on personal samples. Results: The results of the measurements for each substance showed that benzene, toluene, xylene, n-butyl acetate, 2-methoxy-ethanol, 2-heptanone, ethylene glycol, sulfuric acid, and phosphoric acid were non-detectable (ND) in all samples. Arsine was either "ND" or it existed only in trace form in the bay air. The maximum exposure concentration of fluorides was approximately 0.17% of the Korea occupational exposure limits, with hydrofluoric acid at about 0.2%, hydrochloric acid 0.06%, nitric acid 0.05%, isopropyl alcohol 0.4%, and phosphine at about 2%. The maximum exposure concentration of propylene glycol monomethyl ether acetate (PGMEA) was 0.0870 ppm, representing only 0.1% or less than the American Industrial Hygiene Association recommended standard (100 ppm). Conclusion: Benzene, a known human carcinogen for leukemia, and arsine, a hematologic toxin, were not detected in wafer fabrication sites in this study. Among reproductive toxic substances, n-butyl acetate was not detected, but fluorides and PGMEA existed in small amounts in the air. This investigation was focused on the air-borne chemical concentrations only in regular working conditions. Unconditional exposures during spills and/or maintenance tasks and by-product chemicals were not included. Supplementary studies might be required.

• Computers and Concrete
• /
• v.20 no.5
• /
• pp.545-553
• /
• 2017

A pounding tuned mass damper (PTMD) can be considered as a passive device, which combines the merits of a traditional tuned mass damper (TMD) and a collision damper. A recent analytical study by the authors demonstrated that the PTMD base on the energy dissipation during impact is able to achieve better control effectiveness over the traditional TMD. In this paper, a PTMD prototype is manufactured and applied for seismic response reduction to examine its efficacy. A series of shaking table tests is conducted in a three-story building frame model under single-dimensional and two-dimensional broadband earthquake excitations with different excitation intensities. The ability of the PTMD to reduce the structural responses is experimentally investigated. The results show that the traditional TMD is sensitive to input excitations, while the PTMD mostly has improved control performance over the TMD to remarkably reduce both the peak and root-mean-square (RMS) structural responses under single-dimensional earthquake excitation. Unlike the TMD, the PTMD is found to have the merit of maintaining a stable performance when subjected to different earthquake loadings. In addition, it is also indicated that the performance of the PTMD can be enhanced by adjusting the initial gap value, and the control effectiveness improves with the increasing excitation intensity. Under two-dimensional earthquake inputs, the PTMD controls remain outperform the TMD controls; however, the oscillation of the added mass is observed during the test, which may induce torsional vibration modes of the structure, and hence, result in poor control performance especially after a strong earthquake period.

• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.389-398
• /
• 2000

The focus of this study is to investigate how personal display system - Head Mounted Display(HMD) and VDU-affect to the body in virtual environments. This prediction was tested by a comparing of playing 3D games while wearing a HMD and monitoring a VDU for an hour. As quantitative measuring and analyzing tools, SSQ, RSSQ, pre and post posture stability test and vision test are used. The results showed that SSQ and RSSQ total score (TS) are related with the results of pre and post posture stability test and SSQ and RSSQ TS of HMD is higher than TS of VDU by one point five times. Especially, TS of MRG3C, having large field of view, has a possibility by two times of simulator sickness (SS). And in order to investigate the degree of SS regarding to the simulator control condition, two conditions, subjective-passive and subjective-active environments were compared. However, there was no significant difference between two environments. The repetition of the same environment has no effect to reduce the SS. Disorientation and oculomotor scores of the SSQ and RSSQ are higher than that of another symptoms. In addition, RSSQ score of strain/confusion is higher than that of nausea. Therefore, we assume that personal fear could possibly increase the simulator sickness in virtual environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1903-1907
• /
• 2013

Heart condition should be observed for long periods of time because it does not appear abnormal all the time. However, there are many difficulties checking our health for a long time due to its size, operation of equipment, and cost. To solve these problems, an electrocardiograms(ECG), specially interfacing three gel-less metal electrodes for low cost portable applications, is designed and implemented. Gel-less metal electrodes are used for ECG monitoring system instead of gel-type electrodes that can cause skin rashes and itching problem. The whole ECG system consists of two parts-analog and digital circuits. The analog measurement circuit that has a 18*25mm size is made up of op-amps maintaining a sufficiently high common-mode noise rejection and passive elements of SMD type. Analog heart signal is converted to digital stream suitable for display on a TFT-LCD by an 8-bit microcontroller. The size of the completed ECG system is 25*80*50mm and its weighing is about 150g, which is small enough to be easily used. Therefore, the implemented ECG system can be used as a portable one.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.4
• /
• pp.353-368
• /
• 2013

All Koreans had suffered heavily from municipal and industrial air pollution problems since 1960's to 1980's. However the levels of $SO_2$, CO, and Pb have been dramatically decreased since 1990's due to various air pollutants' reduction policies under the provisions of the 1978 Environmental Preservation Act and the 1990 Air Quality Preservation Act such as increasing the supply of low-sulfur fuel, the use of cleaner fuel, no use of solid fuel, and so on. Even though the national ambient air quality standard has been strengthened to protect public health and welfare, the levels of $NO_2$, $O_3$, and $PM_{10}$ frequently exceed the corresponding standards; for example, only 4 stations (1.7%) out of 239 nationwide monitoring stations satisfied the 24-hr based PM10 standard in 2011. Moreover, upto the present time, since there are serious underlying policies of economism and growth-first which can not be solely solved by the environmental laws, it is difficult to root out undesirable social evils such as public indifference, passive academic activities, complacent government bureaucracy, insufficient social responsibility of enterprise, and radical activities of environmental groups. The paper initially reviewed air pollution history of Korea with surveying various environmental factors affecting in/out-door air pollution in the past Korea. Further this study extensively investigated legal and political changes on air pollution control and management for the last 50 years, and then intensively discussed the present environment-related laws and policies unreasonably enforced in Korea. It is necessary to practically revise many outdated legal policies based on health-oriented thinking and on our current economic levels as well.