• ETRI Journal
• /
• v.38 no.5
• /
• pp.885-895
• /
• 2016

The lowest power mode (passive-standby mode) was proposed for reducing the power consumption of set-top boxes in a standby state when not receiving content. However, low-power set-top boxes equipped with the lowest power mode have been rarely commercialized because of their low-quality user experience. In the lowest power mode, they deactivates almost all of operational modules and processes, and thus require dozens of seconds for activation latency (that is, the latency for activating all modules of the set-top boxes in a standby state). They are not even updated in a standby state because they deactivate their network interfaces in a standby state. This paper proposes an adaptive standby mode scheduling method for improving the user experience of such boxes. Set-top boxes using the proposed method can analyze the activation pattern and find the frequently used time period (that is, when the set-top boxes are frequently activated). They prepare for their activation during this frequently used time period, thereby reducing the activation latency and enabling their update in a standby state.

• Corrosion Science and Technology
• /
• v.16 no.2
• /
• pp.69-75
• /
• 2017

Zinc coating on carbon steels give the higher corrosion resistance in chloride containing environments and in carbonated concrete. However, hydrogen evolution accompanies the corrosion of zinc in the initial activity in fresh concrete, which can lead to the formation of a porous structure at the reinforcement -concrete interface, which can potentially reduce the bond-strength of the reinforcement with concrete. The present study examines the mechanism of the corrosion of hot-dip galvanized steel in detail, as in the model pore solutions and real concrete. Calcium ion plays an important role in the corrosion mechanism, as it prevents the formation of passive layers on zinc at an elevated alkalinity. The corrosion rate of galvanized steel decreases in accordance with the exposure time; however, the reason for this is not the zinc transition into passivity, but the consumption of the less corrosion-resistant phases of hot-dip galvanizing in the concrete environment. The results on the electrochemical tests have been confirmed by the bond-strength test for the reinforcement of concrete and by evaluating the porosity of the cement adjacent to the reinforcement.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.2
• /
• pp.153-163
• /
• 2011

Energy efficiency and indoor air quality have become main issue to develop healthy and sustainable building in these days. As an effort to reduce the energy consumption in multi-residential building, many attempts as like passive design strategies and renewable energy as well as active control method are tried. However, underground parking lot in multi-residential building seldom adopt the sustainable strategies and only mechanical system is installed as usual. Moreover, the mechanical system installed in underground parking lot is rarely operated due to the electric demand for operation after completion. In this study, as an energy efficient measure, natural ventilation system using stack effect as a driving force for underground parking lot will be proposed and the performance of the suggested system will be analyzed by simulation method.

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.3
• /
• pp.53-61
• /
• 2013

The purpose of this study is to suggest the way how to improve the school green building certification system based on life cycle assessment methodology and to assess $LCCO_2$ in outline. Green Building Certification System for School is comprised of 7 categories and 39 items. 7 categories include Land use and Transport, Energy and Atmosphere, Materials and Resources, Water, Management, Ecology, Indoor environmental quality. School is a public facility for students. So Green Building Certification System for School must have educational point of view adding to energy saving, reduction of greenhouse gas emission, etc. Also it needs to be classified into three categories ; kindergarten, elementar/middl/high school and university. Improvement plans for items are as follows ; energy consumption and $LCCO_2$ assessment considering life cycle, deletion or integration of duplicate items by comparing other systems, application of passive solar systems, consideration of the law and standards change, and selection of items considering specific building use.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.291-294
• /
• 2003

The circuit substrate was made from the Low Temperature Cofired Ceramics(LTCC) that a $\varepsilon_\gamma$ was 7.8. Accumulated Varactor and the low noise transistor which were a Surface Mount Device-type element on LTCC substrate. Let passive element composed R, L, C with strip-line of three dimension in the multilayer substrate circuit inside, and one structure accumulate band-pass filter, resonator, a bias line, a matching circuit, and made it. Used Screen-Print process, and made Strip-line resonator. A design produced and multilayer-type VCO(Voltage Controlled Oscillator), and recognized a characteristic with the Spectrum Analyzer which was measurement equipment. Measured multilayer structure VCO is oscillation frequency 1292[MHz], oscillation output -28.38[dBm], hamonics characteristic -45[dBc] in control voltage 1.5[V], A phase noise is -68.22[dBc/Hz] in 100 KHz offset frequency. The oscillation frequency variable characteristic showed 30[MHz/V] characteristic, and consumption electric current is approximately 10[mA].

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.56-61
• /
• 2013

With the rapidly increasing power demand in recent years, variety of methods have been proposed for efficient power consumption.. Among them, the most representative example is demand response system based smart grid. Demand response system is not passive, one-side power demand. This system can efficiently consume through communication between service provider and power consumer. Demand response system uses HTTP based TCP/IP. And currently, there are variety of communication application protocol. In this paper, we analyze procotol type and application for demand response system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3079-3085
• /
• 2014

This paper suggests a power level controllable frequency up-converter which is designed and fabricated using both the filtering technology consisted with only passive devices and a multi-level digital attenuator. The suggested frequency up-converter simultaneously realizes the low power consumption and the low cost model. Because of the possibility for controlling power levels, it is possible to use the suggested frequency up-converter for wide spectral range. According to the experimental results, the average gain value of 0.75dB is obtained for the bandwidth of 160MHz at the center frequency of 1,200MHz. Especially, it is confirmed that the power level can be controlled from 10 to -21.5dBm through the digital attenuator.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.373-379
• /
• 2019

Nowadays, the IoT portable electronic devices have become more useful and diverse, so they require various supply voltage levels to operate. This paper presents a DC-DC buck converter with pulse width modulation (PWM) for portable electronic devices. The proposed step-down DC-DC converter consists of passive elements such as capacitors, inductors, and resistors and an integrated chip (IC) for signal control to reduce power consumption and improves ripple voltage with the resolution. The proposed DC-DC converter is simulated and analyzed in PSPICE circuit design platform, and implemented on the prototype PCB board with a Texas Instruments LM5165 IC. The proposed buck converter is showed 92.6% of peak efficiency including a load current range of 4-10 mA, 3.29 mV of the voltage ripple at 5 V output voltage for the supply voltage 12 V. Measured and Simulated power efficiency are made good agreement with each other.

• Journal of Home Health Care Nursing
• /
• v.26 no.1
• /
• pp.27-35
• /
• 2019

Purpose: This study investigated sleep satisfaction and influencing factors in Korean adolescents with atopic dermatitis. Methods: Data were obtained from 4,570 subjects who completed the 2017 13th Korea Youth Risk Behavior Web-based Survey. For data analysis, descriptive statistics and multiple-sample logistic regression were used. Results: The results of this study were as follows. Gender, academic achievement, economic status, perceived stress, happiness, health status, and depression in the subjects showed a significant difference in terms of sleep satisfaction in atopic adolescents. Multiple-sample logistic regression analysis showed that male adolescents (odds ratio (OR)=0.48), academic achievement (low OR=0.67, middle OR=0.78), economic status (low OR=0.50, middle OR=0.64), lack of depression (OR=0.63), perceived stress (very OR=4.65, a little OR=2.25), perceived happiness (unhappy OR=1.99, moderate OR=1.22), perceived health status (unhealthy OR=2.17, ordinary OR=1.35), alcohol nondrinking (OR=0.75), and nonsmoking (OR=0.73) were not associated with sleep satisfaction. Conclusion: It is necessary to develop interventions that can relieve stress management and depression and develop positive emotions in atopic adolescents. In addition, there is a need to improve the environment to avoid health risks such as alcohol consumption and smoking and to minimize the effects of passive smoking.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.477-484
• /
• 2021

The 4kW class inverter for portable ESS designed through this study achieves lightweight and high power density by reducing the volume of passive devices (capacitors, inductors, etc.) suitable for portable use, and minimizes heat loss of the MOSFET through the low on resistance of the MOSFET. So that high efficiency can be achieved. In addition, in order to deliver high quality energy, it is designed to have a low THDV in accordance with the current KEPCO business handling guidelines, and is designed to output a sine wave with low distortion.