• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.71-79
• /
• 1992

In general, the accelerogram of earthquake ground motion or the accelerogram obtained from dynamic tests contain various errors. In these errors of the accelerograms, there are instrumental errors(magnitude and phase distortion) due to the response characteristics of accelerometer and the digitizing error concentrated in low and high frequency components and random errors. Then, these errors may be detrimental to the results of data processing and dynamic analysis. An efficient method which can correct the errors of the accelerogram is proposed in this study. The correction of errors can be accomplished through four steps as followes ; 1) using an interpolation method a data form appropriate to the error correction is prepared, 2) low and high frequency errors of the accelerogram are removed by band-pass filter between prescribed frequency limits, 3) instrumental errors are corrected using dynamic equilibrium equation of the accelerometer, 4) velocity and displacement are obtained by integrating corrected accelerogram. Presently, infinite impulse response(IIR) filter and finite impulse response (FIR) filter are generally used as band-pass filter. In the proposed error correction procedure, the deficiencies of FIR filter and IIR filter are reduced and, using the properties of the differentiation and the integration of Fourier transform, the accuracy of instrument correction and integration is improved.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.176-186
• /
• 2007

As SAR data have the strong point that is not influenced by weather or light amount in comparison with optical sensor data, they are highly useful for temporary analysis and can be collected in time of unforeseen circumstances like disaster. This study is to extract DEM from L-band data of JERS-1 SAR imagery using InSAR and DInSAR processing techniques. As a result of analyzing the extracted coherence and interferogram images, it was shown that the DInSAR 3-pass method produces more suitable coherence values than the InSAR method. The accuracies of DEM extracted from the SAR data were evaluated by employing the DEM derived from the digital topographic maps of 1:5000 scale as reference data. And it was ascertained that baselines between antenna locations largely affect the accuracy of extracted DEM.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.539-549
• /
• 2017

This paper proposes an analytical methodology of station capacity calculation on high - speed railway. Our method explicitly takes into account the effect of the number of sidings and the combination of train halting patterns (stop - stop, pass - stop, stop - pass, pass - pass) on the capacity of a station. To verify the reliability of our model, we conducted capacity analysis of selected stations using the Railsys simulator. We found that the difference in calculated capacity between our model and Railsys was less than 10%. After Monte Carlo simulation, our model was determined to be a good one. In addition, the consistency in capacity between our model and the train-path allocation program (Korea Rail Network Authority) was statistically significant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.231-231
• /
• 2008

최근 인터넷의 보급과 함께 고화질 및 양방향 TV, VOD 방송, 화상 전화 등의 멀티미디어 시대가 열리면서 초고속 통신 시스템에 대한 관심이 증가되고 있다. 특히 화상이나 동영상 같은 대량의 정보가 졸은 품질 및 빠른 속도로 전달될 수 있는 통신 시스템의 필요성이 대두됨에 따라 가장 효율적인 고속 전송 수단으로 광통신이 이용되고 있으며 그에 따른 광통신 능 수동 소자 개발에 관한 연구도 활발히 이루어지고 있다. 이러한 광통신 소자 중 원하는 빛을 선택적으로 투과하고 반사할 수 있는 flat-band pass(FP) filter의 역할이 중요한 부분을 차지하고 있다. 본 논문에서는 IR 영역에서 투과성이 우수한 칼코게나이드 물질을 이용해 l 차원 광자결정구조의 FP-filter를 설계, 제작하고 그에 대한 특성을 평가하였다. 시료는 5N의 순도를 갖는 As, Se, Te 물질을 준비하고 $As_xSe_yTe_z$를 조성비에 맞추어서 석영관에 진공 봉입한 후 용융 혼합하여 $As_{33}Se_{67}$과 $As_{40}Se_{25}Te_{35}$ 조성의 두 가지 비정질 벌크를 제작하였다. 제작된 시료의 굴절률은 ellipsometer을 사용하여 측정하였고, 본 연구진이 자체 개발한 계산툴에 따라 다중층막 구조를 설계하였다. 열 증착법을 이용하여 설계된 구조에 맞게 기판에 올리는 방법으로 1차원 광자결정 구조의 다중층막 샘플을 제작하였고 UV-Vis-IR Spectroscopy를 사용하여 반사도와 투과도를 측정하였다. 광통신용 L/C 밴드 주파수 범위에서 투과성이 우수한 칼코게나이드 박막의 1차원 광자결정 구조는 FP-filter등의 소자로써 유용하게 사용될 수 있다.

• Korean Journal of Comparative Education
• /
• v.18 no.4
• /
• pp.163-186
• /
• 2008

This study intends to understand deeply the higher education evaluation accreditation system in Taiwan. Taiwan established newly the Higher Education Evaluation & Accreditation Council in 2005, an independent organization with the exclusive responsibility to execute evaluation. Three kinds of evaluation have been accomplished, including University Program Evaluation which assesses whole university management, Academic Fields Evaluation and Performance Evaluation which compare the superiority and inferiority among universities. The Accreditation system is applied only to Academic Fields Evaluation. For evaluation, each university presents a self-evaluation report, undergoes an visiting evaluation, makes out an evaluation report and lastly is notified of the result. The evaluation is divided into three results : pass, waiting observation and non-pass. According to an announcement in June 2008, the rate of non-pass universities reached the 15.7%. The non-pass universities are supposed to receive the disadvantaged in the admission number limit and take the following evaluation in the following year. Debates still exists concerning the eliminatory nature of the system and the announcement of achievement rankings through evaluation results. Other problems include the improvement of quality of evaluation committee members and the irrational evaluation standards. These problems will be meaningful for the development of the korean higher evaluation system.

• Journal of Korea Water Resources Association
• /
• v.54 no.1
• /
• pp.15-25
• /
• 2021

The purpose of this study was to present the necessity and effect of culvert fishway, based on the absence of design criteria for it which fishes can pass. As an attempt for this purpose, circular culvert fishway were designed hydraulically to meet the passage condition for selected target fish species, and post-monitoring was performed to confirm its effectiveness. In the case of general circular culvert without weir baffles, the target fish species cannot pass because of the constant depth and velocity in the entire reach of the circular culvert, so it was confirmed that resting pools must be installed to help fish passage. In the case of circular culvert with weir baffles, the depth and the mean velocity in resting pool increased by about 240% and decreased by about 70% respectively, which not only satisfied the passage conditions of Zacco platypus that can swim at more than 10 times the speed of body length for 1 to 5 seconds, but also confirmed that various river fish could pass. Post-monitoring results of the restoration reach and fish capture monitoring surveys of circular culvert fishway demonstrated that the target fish species, Zacco platypus, can pass through it.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.4
• /
• pp.237-247
• /
• 2020

The ground tracking support is a critical factor for the navigation performance of spacecraft orbiting around the Moon. Because of the tracking limit of antennas, only a small number of facilities can support lunar missions. Therefore, case studies for various ground tracking support conditions are needed for lunar missions on the stage of preliminary mission analysis. This study analyzes the ground supporting condition effect on orbit determination (OD) of Korea Pathfinder Lunar Orbiter (KPLO) in the lunar orbit. For the assumption of ground support conditions, daily tracking frequency, cut-off angle for low elevation, tracking measurement accuracy, and tracking failure situations were considered. Two antennas of deep space network (DSN) and Korea Deep Space Antenna (KDSA) are utilized for various tracking conditions configuration. For the investigation of the daily tracking frequency effect, three cases (full support, DSN 4 pass/day and KDSA 4 pass/day, and DSN 2 pass/day and KDSA 2 pass/day) are prepared. For the elevation cut-off angle effect, two situations, which are 5 deg and 10 deg, are assumed. Three cases (0%, 30%, and 50% of degradation) were considered for the tracking measurement accuracy effect. Three cases such as no missing, 1-day KDSA missing, and 2-day KDSA missing are assumed for tracking failure effect. For OD, a sequential estimation algorithm was used, and for the OD performance evaluation, position uncertainty, position differences between true and estimated orbits, and orbit overlap precision according to various ground supporting conditions were investigated. Orbit prediction accuracy variations due to ground tracking conditions were also demonstrated. This study provides a guideline for selecting ground tracking support levels and preparing a backup plan for the KPLO lunar mission phase.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.11
• /
• pp.473-478
• /
• 2022

Evaluation learning based on code testing is becoming a popular solution in programming education via Online judge(OJ). In the recent past, many papers have been published on how to detect plagiarism through source code similarity analysis to support OJ. However, deep learning-based research to support automated tutoring is insufficient. In this paper, we propose Input & Output side FiLM models to predict whether the input code will pass or fail. By applying Feature-wise Linear Modulation(FiLM) technique to GRU, our model can learn combined information of Java byte codes and problem information that it tries to solve. On experimental design, a balanced sampling technique was applied to evenly distribute the data due to the occurrence of asymmetry in data collected by OJ. Among the proposed models, the Input Side FiLM model showed the highest performance of 73.63%. Based on result, it has been shown that students can check whether their codes will pass or fail before receiving the OJ evaluation which could provide basic feedback for improvements.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.157-168
• /
• 2002

Improved procedures were implemented in the production of the lithospheric magnetic anomaly map from Magsat satellite magnetometer data of East Asia between $90^{\circ}E-150^{\circ}E$ and $10^{\circ}S-50^{\circ}N$. Procedures included more effective selection of the do·it and dawn tracks, ring current correction, and separation of core field and external field effects. External field reductions included an ionospheric correction and pass-by-pass correlation analysis. Track-line noise effects were reduced by spectral reconstruction of the dusk and dawn data sets. The total field magnetic anomalies were differentially-reduced-to-the-pole to minimize distortion s between satellite magnetic anomalies and their geological sources caused by corefield variations over the study area. Aeromagnetic anomalies were correlated with Magsat magnetic anomalies at the satellite altitude to test the lithospheric veracity of anomalies in these two data sets. The aeromagnetic anomalies were low-pass filtered to eliminate high frequency components that may not be shown at the satellite altitude. Although the two maps have a low CC of 0.243, there are many features that are directly correlated (peak-to-peak and trough-to-trough). The low CC between the two maps was generated by the combination of directly- and inversely-correlative anomaly features between them. It is very difficult to discriminate directly, inversely, and nully correlative features in these two anomaly maps because features are complicatedly correlated due to the depth and superposition of the anomaly sources. In general, the lithospheric magnetic components were recovered successfully from satellite magnetometer observations and correlated well with aeromagnetic anomalies in the study area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.663-670
• /
• 2016

This paper analyzes the asymmetric pass-through effects of crude oil price changes on export prices in Korea's manufacturing sector using a nonlinear autoregressive distributed lag (NARDL) model. These pass-through effects are important for Korean companies that are highly dependent on exports. Because the effects differ by industry, eight sectors of the manufacturing industry were examined. The model is effective for separately testing the long-term and short-term differences between the export-price pass-through effects when crude oil prices increase and decrease. The estimation results show that there is positive pass-through to export prices as crude oil prices change, and there are asymmetric effects in some manufacturing sectors. Short-term asymmetries were detected in the export prices of five sectors that include general machinery and transport equipment, and significant long-term asymmetries were found for petroleum and coal products and for textile and leather products. The long-term export price of oil and coal products rose by 0.992% with a 1% increase in the oil price and fell by 0.977% with 1% decrease. Therefore, corporate strategies and government export policies should be established in accordance with these asymmetric pass-through effects.