• Journal of Korean language education
• /
• v.28 no.3
• /
• pp.1-24
• /
• 2017

This article explores the developmental history of TOPIK over the last 20 years and its recent trends. Over the last two decades, TOPIK underwent two major systematic reforms, achieving both quantitative and qualitative growth over the course of its 52 testing sessions. TOPIK has utilized a six-level evaluation system from its inception to the present. The evaluation system was amended from the earlier six-test set - whereby each level corresponded with a separate test (1997~2005: the $1^{st}{\sim}9^{th}$) - to the three-test set (2006~2014: the $10^{th}{\sim}34^{th}$), and finally to the two-test set (2014~present: the $35^{th}{\sim}42^{nd}$). In the earlier exams, abilities in Vocabulary Grammar, Writing, Listening, and Reading were assessed. However, beginning with the $35^{th}$ TOPIK, abilities in Listening, Reading, and Writing (only in TOPIK II) were assessed and the evaluation of the writing section was changed to a task-based process, improving TOPIK into a more qualified analysis of proficiency. Over the last 20 years, the number of countries TOPIK is administered in has greatly increased from 4 to 73 countries, and the annual number of test-takers has also significantly increased from 2,692 to 250,141. The distribution of proficiency levels of the test-takers has shifted over time - initially "Beginner>Intermediate>Advanced" in the earlier exams, to "Intermediate>Advanced>Beginner" after the mid 2000s - as the number of those studying the Korean language for specific purposes and continuing education increased. Test-takers have indicated a shift in their purpose for taking the exam, initially citing "to assess proficiency" and more recently selecting "to study abroad," and this could also correlate with changes in the proportion of test-takers' proficiency level. In general, 85~95% of beginner, 50~65% of intermediate, and 45~60% of advanced test applicants passed the respective proficiency level. To date, no practices have yet been implemented to standardize the difficulty level longitudinally across test sets.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.71-84
• /
• 2021

As part of the recent economic revitalization measures, the national level of encouragement for young people's entrepreneurship continues, and investment in young people's entrepreneurship and support from young people are increasing. Entrepreneurship intention is a direct factor leading to entrepreneurship, and many studies have studied the individual characteristics of entrepreneurs that influence entrepreneurial intention. In the same context, the purpose of this study was to investigate the entrepreneur's passion as a factor affecting entrepreneurial intention, divided into harmony passion and obsessive passion. In addition, the pass to need for achievement, emotion, and subjective norms, which are the individual characteristics of entrepreneurs that influence passion, were verified. To this end, an online survey was conducted for prospective entrepreneurs in universities, and data of 203 persons were collected and structural equations were analyzed. As a result of the analysis, it was found that the need for achievement and positive emotions of preliminary entrepreneurs had a positive (+) effect on the passion for harmony, while the negative emotions and subjective norms were not significant for the passion for harmony. The need for achievement had a negative (-) effect on the obsessive passion, and the positive and negative emotions had a positive (+) effect on the obsessive passion, but the subjective norm was not significant on the obsessive passion. It was confirmed that harmony passion and obsessive passion showed positive (+) effect on entrepreneurial intention. It also confirmed whether harmonious passion and obsessive passion have a mediating effect between need for achievement, positive emotion, negative emotion, and entrepreneurial intention. As a result, it has a mediating effect between need for achievement, positive emotion and entrepreneurial intention, especially need for achievement has a complete mediating effect. Obsessive passion was also confirmed to have a mediating effect in the relationship between positive emotions and intention to start a business.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.28-36
• /
• 2018

There was a difference in recognition of respirators according to the educational performance environment. they were showed higher recognition of respirators of group by internal and external mix trainer, less than 6 months, over 1hour, more than 5 times, variety of education. To identify the relationship between types of job classification(typical and atypical)and the levels of recognition of respirators, a total of 153 workers in a business workplace. mainly, typical workers showed higher recognition of respirators than atypical workers. Training of correct wearing showed high demands both typical and atypical workers. Descriptive statistics(SAS ver 9.2)was performed. the results of recognition of respirators were analyzed the mean and standard deviation by t-test, and anova, fit factor is used geometric means(geometric standard deviation), paired t-test, Wilcoxon analysis(P=0.05). Particulate filtering facepiece respirators (PFFR) is one of the most widely used items of personal protective equipments, and a tight fit of the respirators on the wearers is critical for the protection effectiveness. In order to effectively protect the workers through the respirators, it is important to find and evaluate the ways that can be readily applicable at the workplace to improve the fit of the respirators. This study was designed to evaluate effects of mask style (cup or foldable type) and donning training on fit factors (FF) of the respirators, since these are available at various workplace, especially at small business workplace. A total of 40 study subjects, comprised of employment type workers in metalworking industries, were enrolled in this study. The FF were quantitatively measured before and after training related to the proper donning and use of cup or foldable-type respirators. The pass/fail criterion of FF was set at 100. After the donning training for the cup-type mask, fit test were increased by 769%. but foldable-type mask was also increased after the donning training, the GM of FF for the foldable-type mask and it's increase rate were smaller as compared to the cup-type mask. Furthermore, the differences of the increase rates of the GM of FF in employment type of the subjects were not significantly for the foldable-type mask. These results imply that the raining on the donning and use of PFFR can enhance the protection effectiveness of cup or foldable-type mask, and that the training effects for the foldable-type mask is less significant than that for the cup-type mask. Therefore, it is recommended that the donning training and fit tests should be conducted before the use of the PFFR, and listening to workers opinion regularly.

• Journal of Korean Dental Science
• /
• v.11 no.2
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.102-108
• /
• 2020

In this paper, we propose a real-time method of detecting hand motions and extracting the signal frame induced by EF(Electric Field) sensors. The signal induced by hand motion includes not only noises caused by various environmental sources as well as sensor's physical placement, but also different initial off-set conditions. Thus, it has been considered as a challenging problem to detect the motion signal and extract the motion frame automatically in real-time. In this study, we remove the PLN(Power Line Noise) using LPF with 10Hz cut-off and successively apply MA(Moving Average) filter to obtain clean and smooth input motion signals. To sense a hand motion, we use two thresholds(positive and negative thresholds) with offset value to detect a starting as well as an ending moment of the motion. Using this approach, we can achieve the correct motion detection rate over 98%. Once the final motion frame is determined, the motion signals are normalized to be used in next process of classification or recognition stage such as LSTN deep neural networks. Our experiment and analysis show that our proposed methods produce better than 98% performance in correct motion detection rate as well as in frame-matching rate.

• Convergence Security Journal
• /
• v.20 no.4
• /
• pp.187-196
• /
• 2020

In order to manage information security risk, various information security level evaluation and information security management system certification have been conducted on a larger scale than ever. However, there are continuous cases of infringement of information protection for companies with excellent information security evaluation and companies with excellent information security management system certification. The existing information security risk management methodology identifies and analyzes risks by identifying information assets inside the information system. Existing information security risk management methodology lacks a review of where cyber threats come from and whether security devices are properly operated for each route. In order to improve the current risk management plan, it is necessary to look at where cyber threats come from and improve the containment level for each inflow section to absolutely reduce unnecessary cyber threats. In addition, it is essential to measure and improve the appropriate configuration and operational level of security equipment that is currently overlooked in the risk management methodology. It is necessary to block and enter cyber threats as much as possible, and to detect and respond to cyber threats that inevitably pass through open niches and use security devices. Therefore, this paper proposes additional evaluation items for evaluating the containment level against cyber threats in the ISMS-P authentication items and vulnerability analysis and evaluation items for major information and communication infrastructures, and evaluates the level of security equipment configuration for each inflow.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.525-532
• /
• 2022

The port of Mokpo operates the largest number of coastal passenger ships and routes in Korea. These coastal passenger ships pass through narrow channels in the south-west coast of Korea owing to the geographical effect. It is difficult to find a research for the safety of the marine traffic environment in the narrow channel used by coastal passenger ship. Therefore, in this study, the navigation safety of the target coastal passenger ship was analyzed in the narrow channel near the port of Mokpo using the Korea design standard for port and harbour facilities. As a result of the analysis, the width of the narrow channel between Maek-island and Dali-island is narrower than 1.5 times of the target ship's length over all, the degree of curvature of the narrow channel exceeds the standard value of 30°, and several fishing gears exist near the narrow channel. Finally, the following were suggested to improve the safety of navigation on the narrow channel: keeping one-way traffic during the day-time, and navigating through the designated fairway during night·visibility restriction·low tide.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.49-52
• /
• 2022

As the difficulty of flip chip products increase, interest in stable PKG material technology from the viewpoint of reliability is increasing. Currently, the representative of poor reliability that are mainly occurring in flip chip PKG are Sn bridge and Cu dendrite. Two type defects are caused by void generated by the flux residue around the bump. In order to essentially minimize the risk of this type of reliability failure, the linkage between the composition of Molded Under-fill (MUF) and flux, which is related material, was reviewed. In this study, the correlation between base resin and filler, which is the main component of MUF, and flux, was defined, and the material composition design was carried out by refer to lesson learn. With the current material composition, it was confirmed that moisture absorption reliability 85%/85%/24hrs pass result and void did not occur during destructive analysis, and developed MUF has shown flux immunity improving result in flip Chip PKG. We think this study can be used in yield enhancement of flip chip process and give insights to study in compatibility between MUF and flux.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.5
• /
• pp.131-146
• /
• 2020

This research is based on social flow that is in need of sports welfare that diagnoses the delivery system of sports program pass that is typical business of national sports welfare services and operation structure, and analyze the supplier, operator, beneficiary and all that is related to business from multilateral aspects, therefore seek for operation systems for provision systems of sports welfare services. To clearly grasp the operating mechanisms of service provision system that is happening in real field, there were in-depth interview done by the 18 people of suppliers, operators, and beneficiaries that are the main participants of business, and through which drew an ideal agreed point for sports welfare services to get in the right direction. The result of this study is as following: First, based on the limited government budget for the compilation of budget for the business of sports welfare services it is found that there is need of constructing a pragmatic service provision system that can bring maximum of efficiency. Second, voucher that was introduced for market logic application and greater transparency of the business of sports welfare services has a complex structure that it is in need of simplification of structure which that is well fit with its characteristics. Third, for convenience enlargement in administration and management, make management policy of provision system be reflected and therefore enlarge the independence of management and secure the power of negotiation regarding fee savings through centralized budget management.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.755-775
• /
• 2022

This study empirically analyzes that the asymmetry of domestic gasoline price adjustment to the crude oil price changes can vary depending on the level of gasoline price using quantile autoregressive distributed lag model. The data used are the weekly average Dubai price, domestic gasoline price at refiners and gas stations from the first week of May 2008 to the second week of October 2022. The study estimates three price transmission channels: changes in gas station gasoline prices in response to changes in Dubai oil prices, changes in refiners gasoline prices in response to changes in Dubai oil prices, and changes in gas station prices relative to refiners gasoline prices. As a result, the price adjustment of refiner's gasoline price with respect to Dubai oil price appears asymmetrically across all quantiles of gasoline price, whereas the adjustment of gas station prices for Dubai oil price and refiner's gasoline price tend to be more asymmetric as the quantile of gasoline price increases. Such a result is presumed to be due to changes in the inventory cost of gas stations. When the burden of inventory cost is high, gas stations have an incentive to more actively pass the increased buying price on their selling price.