• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.35-41
• /
• 2014

This paper presents a design method of programmable low pass filter(PLPF) which reduce an estimation error of a zero crossing point(ZCP) for a high speed brushless DC(BLDC) motor drive. BLDC motor sensorless drive is possible by estimation of ZCP. The ZCP estimated by detecting a change of back-EMF polarity has the estimation error because noises exist on the measured back-EMF. Therefore a calculated commutation timing using the ZCP is inaccurate. And the inexact commutation timing leads to ripples of 3-phase current and degradation of drive performance. This paper proposes the design method of the PLPF to overcome these problems. First, a speed calculated a inaccurate period of the ZCP is analyzed in the frequency domain. Then, the PLPF that has varying cut-off frequency according to change of the speed is designed on the frequency analysis result. The proposed method is verified by the experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.162-162
• /
• 2016

본 연구에서는 한국 낙동강에 위치한 강정-고령보에 설치된 by-pass 어도의 유인효율을 유량 변화에 따라 살펴보고, 어도 유인효율을 극대화할 수 있는 최적의 본류 방류량을 산정하였다. 강정-고령보는 고정보와 가동보로 구성된 혼합식 보로 유량조절이 가능하며, 가동보의 조작에 따라 by-pass 어도 내의 유량이 결정된다. 유인효율의 지표로 목표어종의 HSC(Habitat Suitability Criteria) 지수에 기반한 WUA(Weighted Usable Area)를 삼았다. WUA는 평면 2차원 물리서식처 모형인 River2D를 활용하여 계산하였다. 또한 River2D로 계산된 유속장은 GPS Floater를 활용한 현장관측 자료로 검증하였으며, 어망을 이용한 월별 어류 모니터링 자료로 유인효율 평가의 타당성을 간접적으로 검증하였다. 결과적으로 본 연구 대상인 강정-고령보의 by-pass 어도에서 가장 효과적으로 목표 어류를 유인하기 위해서는 본류의 유량이 190 cms내외를 유지해야 한다. 특히 목표 어류인 모래무지가 봄철(4월~6월)에 산란기를 맞아 상하류로 이동하려는 경향을 띄므로, 이때 적절한 가동보 운영을 통해 본류 유량을 190 cms로 유지하는 것이 필요하리라 사료된다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.950-956
• /
• 1986

In this paper, a direct addressing mode of a microprocessor is introduced to save memory capacity, and also a dedicated digital filter is constructed to speed up the filter processing and to enable an easy selection of the impulse response types. A theoretical analysis has been conducted on the errors caused by the finite word klength, rounding-off and multiplication procedures. The digital filter designed by the proposed method is made into a module which can function as a 7th-order recursive or a 14-order nonrecursive type with a simples witch operation. The proposed filter is implemented on a printed-circuit board. The frequency characteristics of this filter can be controlled by the multiplication values stored in ROMs. A low-pass, a high-pass and a band-pass filter have been designed and their frequency characteristics are verified by actual measurements. For a order higher filer, two filter modules have been cascaded into an integrated filter of 23rd-order non-recursive low-pass type and a 12th-order recursive multiband type. Their frequency characteirstics have been found to agree with the theory.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.7-17
• /
• 2023

In the era of the 4th industrial revolution, airports around the world are rapidly pushing for smart airports. One ID service based on biometric technology to eliminate congestion and improve airport operation efficiency is one of them. In particular, biopass, which allows you to use the entire journey with one single token without an ID card or boarding pass from arrival at the airport to boarding an aircraft, is emerging as an important technology for smart airports. This study conducted an empirical analysis to identify factors that affect the intention to use in two aspects: the acceptance, and rejection of bio-pass by combining UTAUT and the innovative resistance model. As a result of the study, it was found that the relative advantages and compatibility had a positive effect on the intention to use, and the perceived risk had a negative effect on the intention to use through innovation resistance. This suggests that infrastructure expansion and usage expansion are needed to use time more efficiently at airports, and that the government, airlines, and airport operators need to cooperate to strengthen the security system to relieve users' psychological anxiety.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.767-770
• /
• 2002

Reduction of the propagation noise generated during pass-by of KTX by noise barrier was measured and analysed for the two kinds of top-shaped noise reduction devices; one as a plywood board and the other as a PVC pipe were placed periodically. The height and length of reference noise barrier are 2.4 m and 50 m, respectively. The noise reduction with and without noise reduction devices was investigated.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.91-94
• /
• 2000

This paper introduces the design of low-power, fast-locking delay locked-loop using complementary pass transistor logic(CPL). Low-power design has become one of the most important in the modem VLSI application. CPL has the advantage of fast speed, high density, and low power with signal buffering between stages. Based on this analysis, we concluded that the I/O performance can be beyond 500㎒, 2-poly, 2-metal 0.65$\mu\textrm{m}$, 3.3V supply.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.125-126
• /
• 2009

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.111-116
• /
• 2001

This paper introduces how to adopt the X-12-ARIMA to decompose the railway passenger demand of the Korea National Railroad Especially, selecting on proper filters is focused. The trend filter is identical to the low pass filter in the signal Processing field, and so the seasonal filter is to band pass filter too. Some considerations, selecting a filter, are provided from the view-point of the spectrum analysis. The technique introduced in this paper will be adopted to the project that is to develope the forecasting system of Korea railway passenger demand which is a part of the high speed rail information system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.69-77
• /
• 1999

Roll profile design in spape rolling with a complex-shaped part depends on the designer's experience, which is general, is acquired through costly trial-and-error process. As a prerequisite for developing a scientific approach to roll profile design, we present a finite element model to simulate 3-D deformation of complex-shaped parts occuring in multi-pass sequence. Demonstrated is the process model's capability to deal with rolling of a complex-shaped part.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.316-316
• /
• 2000

SPM dynamic model was developed by using Bland & Ford formulas considered elastic zone in roll gap, gauge meter equation, tension equation, speed equation and actuator models. And SPM controllers of the field were done model ing. It was shown the efficiency of constant tension, rol1ing force and elongation controllers by the simulation program and it was recommended the proper gain to the controllers of the field.