• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.140-144
• /
• 2010

In this study, we investigated the clean appearance and good stretch properties. Usually, clean appearance concerned with the dyeing properties of core and effect yarns. The dyeing properties between core yarn (conjugate yarn) and effect yarn were determined by the build-up and the color differences using the four different yarns of SDY FD(spindraw yarn full dull), SDY CD(spindraw yarn cation dyeable), POY FD( partially-oriented yarn full dull) and POY CD(partially-oriented yarn cation dyeable). We used the single color dye of C. I. Disperse Blue 79 and mixed colors made by C. I. Disperse Red 60, C. I. Disperse Blue 56, and C. I. Disperse Yellow 54.

• Fashion & Textile Research Journal
• /
• v.13 no.1
• /
• pp.130-134
• /
• 2011

In the study, the physical properties of the raw sample, non-circular(+ type) DTY yarn(50d level) with absorption and quick-dry function, were examined before and after being twisted(1000T/M). The results are as follows: The shrinkage of non-cricular(+type) DTY yarn(50d/36f) at $180^{\circ}$ was about 6-7% with twisted samples, but the samples without twisting went 8 to 10%. The elongation of the non-twisted and twisted samples at $180^{\circ}$ and 30-minute treatment time reached 50% and 40%, respectively. The tenacity of non-cricular(+type) DTY yarn(50d/36f) was affected less by treatment temperature in the twisted condition.

• Fashion & Textile Research Journal
• /
• v.1 no.2
• /
• pp.166-172
• /
• 1999

An experimental investigation has done for studying the changes of physical properties of the air-jet textured polyester yarn. Through the experiments of polyester 85/72 drawn yarn and 50/36 partially oriented yarn doubling' the following results are obtained. The tenacity of textured yarn decreased as the number of tension rings increased when the nozzle diameter was 1.2 mm. In the case when the tension ring was not used during the texturing process, the tenacity of textured yarn decreased as the nozzle diameter increased. But this tendency changed according to the number of tension rings used, the diameter of the nozzle, and yarn take-up speed. Breaking elongation decreased as the number of tension rings increased from one to four and the take-up speed increased at diameter 1.2 mm of the nozzle. The higher the diameter of the the nozzle the higher the breaking elongation until 1.4 mm. The number of interlacing went down as the diameter of the nozzle increased and the take-up speed of the yarn increased. The higher the number of tension rings, the lower the number of interlacing.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.103-110
• /
• 2000

To examine the physical properties of POY through the microstructure control, the crystal structure such as the crystallinity, the crystallite size, the orientation, the shrinkage, the tensile properties, and the thermal stress of POY(80/48, SD) were examined at different draw ratios and annealing temperatures. From the examination following conclusions were obtained : 1. The crystallinity was more effected by the heat setting temperature than by the draw ratio. The increasing rate was greatest at the heat setting temperature range of $170~190^\circ{C}$. 2. The crystallite size perpendicular to the fiber axis was more effected by the annealing temperature at lower draw ratios. On the other hand, the crystal and amorphous orientations were more effected by the heat setting at higher draw ratios. 3. The boiling shrinkage did not change significantly, but the total shrinkage showed 13% at the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$. 4. The maximum thermal stress increased with increasing the draw ratio and decreasing the heat setting temperature in the temperature range of $170~210^\circ{C}$. At the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$, the maximum thermal stress found was 1.1gf/d. 5. In the heat setting temperature above $170^\circ{C}$ after the drawing, the crystallinity, the crystallite size, the orientation, and the strength increased with increasing temperature, but the shrinkage and the maximum thermal stress decreased with increasing temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.63-75
• /
• 1993

Partially oriented polyester yarn (PET POY) was treated in the unrestrained state using various solvents at different temperatures. Interactions between PET POY & solvents were estimated by the changes of microstructure, morphology and mechanical properties. The correlation between the changes of microstructure & morphology and the changes of mechanical properties was also studied. TCE, Dioxane, O-DCB, DMF, and BA were found to be active solvents, while Iso-AA and water were found to be weak solvents. PET POY was affected mainly by the solvents when treated with active solvents and affected mainly by heat when treated with weak solvents. Changes by the solvent treatment in microstructure and morphology were : an increase in crystallinity, a change in birefringence, a shrinkage in length, and a change in DSC curve. As for the changes in mechanical properties, findings in the PET POY when treated with solvents were : a decrease in stress-at-break, a change in yield stress, an increase in strain-at-break & yield strain, and a decrease in initial modulus. Changes in microstructure and morphology directly affected the mechanical properties.