The Changes of the Textured Yam Physical Properties in Polyester Interlacing Texturing Process (I) -The Effect of Nozzle Diameter and Tension Ring-

폴리에스테르 인터레이싱 텍스쳐가공 공정에서 가공사의 강신도와 인터레이싱 수의 변화 (I) -노즐의 지름과 텐션 링의 영향-

  • Lee, Choon-Gil (Dept. of Textile and Fashion Technology, College of Eng., Kyungil University) ;
  • Oh, Bong-Hyo (Dept. of Textile Production, Textile Polytechnic College)
  • 이춘길 (정일대학교 공과대학 섬유패션학과) ;
  • 오봉효 (섬유기능대학 섬유생산기술학과)
  • Received : 1999.05.10
  • Published : 1999.05.28

Abstract

An experimental investigation has done for studying the changes of physical properties of the air-jet textured polyester yarn. Through the experiments of polyester 85/72 drawn yarn and 50/36 partially oriented yarn doubling' the following results are obtained. The tenacity of textured yarn decreased as the number of tension rings increased when the nozzle diameter was 1.2 mm. In the case when the tension ring was not used during the texturing process, the tenacity of textured yarn decreased as the nozzle diameter increased. But this tendency changed according to the number of tension rings used, the diameter of the nozzle, and yarn take-up speed. Breaking elongation decreased as the number of tension rings increased from one to four and the take-up speed increased at diameter 1.2 mm of the nozzle. The higher the diameter of the the nozzle the higher the breaking elongation until 1.4 mm. The number of interlacing went down as the diameter of the nozzle increased and the take-up speed of the yarn increased. The higher the number of tension rings, the lower the number of interlacing.

Keywords