• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.89-92
• /
• 2012

PURPOSE. Adequate passive-fitting of one-piece cast 3-element implant-supported frameworks is hard to achieve. This short communication aims to present an alternative method for section of one-piece cast frameworks and for casting implant-supported frameworks. MATERIALS AND METHODS. Three-unit implant-supported nickel-chromium (Ni-Cr) frameworks were tested for vertical misfit (n = 6). The frameworks were cast as one-piece (Group A) and later transversally sectioned through a diagonal axis (Group B) and compared to frameworks that were cast diagonally separated (Group C). All separated frameworks were laser welded. Only one side of the frameworks was screwed. RESULTS. The results on the tightened side were significantly lower in Group C ($6.43{\pm}3.24{\mu}m$) when compared to Groups A ($16.50{\pm}7.55{\mu}m$) and B ($16.27{\pm}1.71{\mu}m$) ($P$ <.05). On the opposite side, the diagonal section of the one-piece castings for laser welding showed significant improvement in the levels of misfit of the frameworks (Group A, $58.66{\pm}14.30{\mu}m$; Group B, $39.48{\pm}12.03{\mu}m$; Group C, $23.13{\pm}8.24{\mu}m$) ($P$ <.05). CONCLUSION. Casting diagonally sectioned frameworks lowers the misfit levels. Lower misfit levels for the frameworks can be achieved by diagonally sectioning one-piece frameworks.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.239-245
• /
• 2018

If complication arises after glossectomy which leads to trouble in forming food bolus or transfer of the food, it is possible that either food bolus may block the airway or dysphagia may occur as the food bolus goes down into the airway. To solve the issue, palatal augmentation prosthesis could be used. In this case, the patient with an oral cancer is having difficulties swallowing food after glossectomy. Through taking impressions of polishing surface of his denture referring his tongue movement, the complete denture for the upper jaw was created using the concept of palatal augmentation prosthesis. This new upper denture increases the palatal-tongue contact pressure, allowing the patient to perform better swallowing and better pronunciation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.46-52
• /
• 2017

Provisional restoration plays an important role in the process of restoration with fixed partial denture by providing protection and restoring function and esthetics of abutment tooth. This is especially true in patients requiring use of provisional prosthesis for a long term. However, such situations may lead to higher possibility of provisional prosthesis fracture, and if expected so, reinforcement of provisional prosthesis should be considered. In this article, a patient requiring prosthetic treatment with increase of vertical dimension of occlusion was introduced. Due to increased vertical dimension of occlusion, the provisional restoration was expected to withstand relatively larger amount of load during a relatively long observation period. In order to minimize possible occurrence of fracture, reinforcement of the provisional restoration was sought by insertion of cast-metal framework and by using bis-acryl resin. The reinforced provisional restoration showed satisfactory results during the observation period of 4 months.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.90-99
• /
• 2023

Implant overdentures are widely used as a treatment method to restore oral function in completely edentulous or partially edentulous patients with severe bone resorption. Using a milled bar, it is mechanically advantageous as the implant fixtures are splinted. Applying additional attachments to the bar has the advantage of dispersing the stress applied to the implant. In this case, a patient who used implant overdentures using 4 implants wanted to fabricate a new prosthesis due to repeated fractures of the denture and weakened retention. Milled bar with ADD-TOC attachment and zirconia prosthesis were fabricated by CAD-CAM method and mechanically and aesthetically satisfactory results were obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.131-139
• /
• 2024

In a edentulous patient, various methods can be employed for prosthetic treatment using implants, such as implant-supported fixed prostheses, overdentures, hybrid prostheses, and implant assisted removable partial denture. In this case, in a patient with moderate to severe chronic periodontitis requiring full arch extractions, implants were strategically placed using computer-guided surgery. In the maxilla, due to inadequate bone quality and quantity leading to insufficient initial stability, delayed loading was implemented, and interim prosthesis was used during the osseointegration period. In the mandible, stable initial stability was achieved, allowing for immediate loading to reduce patient discomfort. Primary stability is considered the most crucial factor for obtaining immediate loading, so a thorough clinical and radiological evaluation of the remaining alveolar bone quantity and quality must be conducted before surgery.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.301-309
• /
• 2015

Purpose: The aim of this study was to evaluate the clinical performance of screw- and cement-retained implant prosthesis (SCP) design in terms of retained preload of abutment screws and cement washout. Materials and methods: Patients with the partial posterior edentulous areas comprised the study group. Implants were placed, and SCPs were delivered after 3 to 6 months healing. Follow-up examinations were performed. The implant survival rate and the prosthetic success rate were evaluated. The retained preload ratio of abutment screws and the prosthetic decementation ratio were measured. Results: Twenty one SCPs (forty three implants)in twenty patients were followed up to 64 months. All of the implants survived during the follow-up period (mean follow-up: 34 months). The prosthetic success rate was 100 % considering no abutment, screw, porcelain or metal frame fractures, as well as no screw loosening. The retained preload ratio of SCPs at the end of follow-up period was 97.61% (${\pm}16.29$) and the decementation ratio was 9.5 %. Conclusion: Within the limitations of this clinical study, SCP design showed favorable short-term clinical performances in respect of screw loosening and cement washout.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.32 no.2
• /
• pp.54-68
• /
• 2023

Treatment planning of edentulous patient with digital method is materialized by designing the surgical guide. When designing the surgical guide, we first implement the shape of the final prosthesis in the virtual space and then materialize the implantation plan based on this. However, it is challenging to make surgical guides for edentulous patients as their lack of both the reference for the arrangement of teeth and interocclusal relationship makes it hard to envision the shape of the final prosthesis. If there exists good partial or complete dentures or residual teeth, its teeth arrangement can be used as a reference for the virtual final prosthesis and the subsequent surgical guide. If such a reference is absent or unsatisfactory, a process of manufacturing a complete denture for diagnostic purposes and verifying it on patient's mouth is necessary and use it as a new reference for the virtual final prosthesis. But even if a surgical guide is produced through the reference from the thorough reflection of the virtual final prosthesis, when we use it in the surgical field, the intraoral condition of the patient may make the implants deviated from planned in the surgical guide. In the worst case, if the positioning of the surgical guide on the mouth is incorrect, it can lead to a catastrophic error that displaces all the implant, in which case the guided surgery would be much worse than the non-guided one. In this article, we will discuss how to obtain references of tooth arrangements in a timely manner and align or register them into a unified coordinate system in digital space, and also introduce how to transfer such an implantation plan from the virtual world into the patient's mouth of real world with minimum error. And lastly, I would like to express my opinion on the establishment of a rational and systematic protocol of guided surgery of the edentulous patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.3
• /
• pp.193-200
• /
• 2024

In patients with severe alveolar bone resorption on mandibular anterior edentulous areas, it can be difficult to place implants in the location for crowns, and to create the fixed prosthesis having an adequate emergence profile or embrasure, which makes maintenance difficult. Fabricating a removable zirconia prosthesis with a milled bar on poorly positioned implants can be a good option because of easy maintenance. In this case, the patient had severe bone resorption on mandibular anterior region, and large vertical space. We report on the aesthetical and easy-to-maintain results by placing two implants and fabricating a zirconia prosthesis using milled bar.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.22 no.1
• /
• pp.47-55
• /
• 2013

There have been a great number of developments in clinical techniques and dental materials in dentistry to date. Looking at these developments, while it could be seen that functional elements such as mastication were prioritized rather than aesthetic aspect in the past, aesthetic needs of patients have steadily increased over time and accordingly the aesthetic has become considered a priority in the development of dentistry. Although the first to be considered in discussing the aesthetic in clinical dentistry will be the white aesthetic that is the tooth part of prosthesis, the pink aesthetic that refers to the harmony of such prosthesis with gingiva can be an important consideration not to be ignored aesthetically. However, the harmony with the gingiva often cannot be obtained only by the beautiful prosthesis, and in particular, the pontic and implant areas have poor conditions to achieve the gingival (pink) aesthetic due to the absorption of alveolar ridge compared to natural teeth. Among the most important elements of the gingival aesthetic are the gingival level and the interproximal papilla height. It is very difficult to make the gingival aesthetic in the case of insufficient alveolar ridge, and the recovery of ridge volume and contour is necessary in order to overcome this condition. To this end, the most widely used method is the "connective tissue graft". Many techniques of the connective tissue graft have already been introduced for the ridge augmentation, and each technique has different purposes, and advantages and disadvantages. Rather, due to the excessive amount of techniques, there is confusion about selecting the right technique at a certain time. However, the goal is clear. Ways to increase the success rates must be found, and at the same time, a more favorable way to the gingival aesthetic is to be chosen. Thus, in this study, considerations for the gingival aesthetic that makes harmony and the techniques to achieve it are discussed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.113-124
• /
• 2023

Purpose. The purpose of this study is to help increase the success rate by analyzing the types and characteristics of implant prosthesis and the survival rate. Materials and methods. Among implants placed between 2011 and 2020 at Sanbon Dental Hospital, College of Dentistry, Wonkwang University, a case restored by a prosthetic surgeon was investigated for the characteristics and correlation of failure. The causes of failure were classified as failure of osseointegration, peri-implantitis, fixture fracture, abutment fracture, screw fracture, screw loosening, prosthesis fracture, and loss of prosthesis retention. Prosthetic method, cantilever presence, placement location, etc. were analyzed for their correlation with implant failure. Results analysis was derived through Chi-square test and Kaplan-Meier survival analysis using SPSS ver 25.0 (IBM, Chicago, IL, USA). Results. A total of 2587 implants were placed, of which 1141 implants were restored with Single Crown and 1446 implants with Fixed Partial Denture, and the cumulative survival rate was 88.1%. The success rate of SC was 86.2% (984) and the success rate of FPD was 89.6% (1295), showing statistically significant differences, among which factors that had significant differences were abutment fracture, screw fracture, and screw loosening (P < .05). Conclusion. As a result of the 10-year follow-up, more failures occurred due to biomechanical factors than biological factors. Further studies on the success of implants will be needed in the future.