• Journal of Drive and Control
• /
• v.16 no.1
• /
• pp.36-44
• /
• 2019

Variable displacement swash plate piston pump analysis requires electric, hydraulics and dynamics which are similar to the one's incorporated in the complex fluid power and mechanical systems. The main variable capacity for the swash plate piston pumps, hydraulics or simple kinematic (swash plate degree, piston displacement) models are analyzed using AMESim, a multi-physics analysis program. AMESim is a multi-physics hydraulic analysis program that is considered good for the environment but not appropriate for environmental analysis for multibody dynamics. In this study, the analytical model of the swash plate type hydraulic piston pump variable capacity is modeled by combining the hydraulic part and the dynamic part through co-simulation of multibody dynamics program (Virtual.lab Motion) and multi-physics analysis (AMESim). This paper describes the whole modeling analysis method on the mechanical analysis of the multi-body dynamics program and how the hydraulic analysis in multi-physics analysis program works. This paper also presents a methodology for analyzing complex fluid power systems.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.24-30
• /
• 1978

This study was designed to analyse effects of Family Health Workers' activities on the performance of a child immunization program as part of the evaluative research in the community health demonstration project in Kang Wha. Frequent shortcomings of evaluative research are problems in setting evaluative indices, difficulties in interpreting influences of socioeconomic changes due to lack of control and failure of demonstrating association between activity input and program performance. Specific objectives of this study was to improve the frequent shortcoming of evaluative research by isolating the effects of Family Health Workers' activities on the performance of the program through controlling other variables which also influenced the program performance. The target population consisted of 1240 children who were born between Jan. 1971 and Dec. 1975 in Sunwon Myun, and Naega Myun in Kwang Wha Gun, Kyonggi Province. The data were collected in part through 20 Family Health Workers who interviewed the mothers of these children in their villages during Nov. 1977. Part of the data were obtained by summarizing Family Health Workers daily activity records. All data were grouped for each birth cohort according to the 20 villages. Dependent variable of the model is the measle immuinization rate of each village and the independent variables are characteristics of baby, mother, household, travel time to the health subcenter, to Kang Wha Town, and the mean member of visits to the household by Family Health Workers as well as their other related activities and the year of birth of children according to village. The model was analysed by stepwise multiple regression technique. The summarized results show that overall $R^2$ were 39.3% and mean number of Family Health Worker household visits, mean age of mother and mean economic status were significant variables in explaining the immunization rate. Therefore Family Health Workers' activities are one of the significant variables in influencing the increased immunization rate of children in villages of the project area.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.1
• /
• pp.1-14
• /
• 2020

Purpose : The purpose of this study was to investigate the effect of an exercise program with patella mobilization on range of motion, muscle strength, and gait in patients with total knee arthroplasty. Methods : Thirty patients under the age of 65 who visited the T hospital in Daegu Metropolitan City and underwent total knee arthroplasty surgery were selected for this study. Fifteen patients were randomly assigned to the experimental group and took part in an exercise program with patella mobilization, and fifteen patients were randomly assigned to the control group and took part in just the exercise program. Each group took part in their intervention three times a week for four weeks. The measurement tools used included a goniometer, handheld dynamometer, and 10-meter walking test. In the statistical analysis results, to compare the about pre and post test differences within each group, a paried t-test was used, and to compare the differences between each group, an independent t-test was used. Results : There was a significant difference (p<.05) in the range of motion, muscle strength of the quadriceps femoris and, hamstrings, and 10-meter walking test within each individual group and between the two groups before and after the intervention (p<.05). Conclusion : All the results for the experimental group were significant. Therefore, it is expected that an exercise program with patella mobilization will be helpful for the recovery of the knee joint in patients who have undergone total knee arthroplasty.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.93-97
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism and a curved inverse earn. The main objective is the development 0 fan algorithm of the earn-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the second part of paper, this paper introduces the technique for the mechanism simulation and graphics-oriented CAD programming. The first part of r paper presents the algorithm to analyze the motion of the inverse earn and the automatic feeding mechanism.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.83-91
• /
• 1987

This paper is concerned on kinematic Analysis and Simulation of an automatic feeding mechanism and a curved inverse cam. The main objective is the development of an algorithm of the cam-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the first part of paper, this paper introduces the algorithm to analyze the motion of the inverse cam and the automatic feeding mechanism. The second part of paper presents the technique for the mechanism simulation and graphics-oriented CAD programming.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.260-266
• /
• 2006

The construction of settlement house in a permanent rental housing development area started between 1989 and 1992, planning of supplying two hundred fifty thousand residences, settlement house became compulsory as a welfare facilities. As a part of Welfare program for low income families, number of settlement housing increased dramatically, also domiciliary welfare center was beginning to set up as a branch of settlement housing to strengthen its service towards families and local communities, thus numerous social welfare organizations play a crucial part in resolving a welfare problem for low income families while satisfying local community's needs. However, despite of these efforts, the number if institutions cannot handle demand of local community's needs and number of welfare institution programs. as a solution, the alternation of space is being used, however, it did not solve basic problem, even worsen in terms of space efficiency.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.134-139
• /
• 2002

Motorcycle industry, for its competitive position, depends on part design technology. This part design has a bulky amount of data and asks the accumulation of advanced technical skill and experience, and fragmentary technical application is not enough to get to the kernel of a problem. Therefore, the improvement of proper productivity - the starting point of engineering design - and useful Design Methodology for products manufacturing are needed. Thus this paper is aimed to create a program that outputs dynamic characteristics of a vehicle when the data from fully understanding on motorcycle's brake system and induced formula for brake design are inputted.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.101-110
• /
• 2003

Motorcycle industry, for its competitive position, depends on part design technology. This part design has a bulky amount of data and asks the accumulation of advanced technical skill and experience, and fragmentary technical application is not enough to get to the kernel of a problem. Therefore, the improvement of proper productivity - the starting point of engineering design - and useful Design Methodology for products manufacturing are needed. Thus this paper is aimed to create a program that outputs dynamic characteristics of a vehicle when the data from fully understanding on motorcycle's brake system and induced formula for brake design are inputted. This paper is intended to show a creative design method by the thermal analysis data through FEM study and using shape design parameters derived from our programs.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.445-452
• /
• 2006

In this paper, the conceptual design of satellite digital base put which is based upon data interface between satellite on-board computer and remote devices like satellite sub-components is presented. This conceptual design shows the unification of the interface between on-board computer and satellite remote devices and the hierarchical results of the interface level. A comparison of different system and merits and demerits of digital base part coming from this conceptual design is performed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.63-72
• /
• 2004

This paper is developed a computer program to analysis the elastic local and overall buckling stress based on Eurocode 3 Part 1.3 for the flange and web, and Euler equations for columns of cold-formed channel under compression at elevated temperatures. The high temperature stress-strain relationships of steel used this paper are determined according to Eurocode 3 Part 1.2. Critical temperatures and the elastic local buckling stresses of the cold-formed channel columns under compression at elevated temperatures are analysed by the computer program developed in this study. Analysis examples are given to show the applicability of the computer program developed in this study.