• 한국임상수의학회지
• /
• 제34권5호
• /
• pp.384-387
• /
• 2017

A dead male Jeju weasel with clinical signs of severe dehydration and moribund was submitted for the necropsy. Grossly, purple-red ecchymoses were scattered in the surface of the entire lungs. Milky-white mucoid materials occupied in the left bronchial lumens. Histopathologically, an adult worm with thick cuticle layer surrounded by chronic inflammatory cells was embedded in the left caudal lung lobe. Numerous oval or barrel-shaped parasitic eggs with muco-purulent exudates were observed in the dilated bronchus of another section of left caudal lobe. Operculate parasitic eggs showed typical morphologic characteristics such as barrel shape with asymmetry bipolar plugs and thick bi-layered wall. Based on the histopathologic findings and morphological characteristics of parasitic eggs in the pulmonary tissue section, this case was diagnosed as verminous pneumonia associated Eucoleus aerophilus infection in Jeju weasel.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.88-93
• /
• 2016

LCL filters are widely used in high-order harmonics attenuation of output currents in grid-connected inverters. However, output currents of grid-connected inverters with LCL filters can become unstable because of the resonance of the filters. Given that the characteristics of output currents in inverters mostly depend on filter performance, the exact analysis of filters by considering parasitic components is necessary for both harmonics attenuation and current control. LCL filters have three or four parasitic components: the series and/or parallel resistance of the filter capacitor and the series resistance of the two filter inductors. Most studies on LCL filters have focused on the parasitic components of the filter capacitor. Although several studies have addressed the parasitic components of the filter inductor at the inverter side, no study has yet investigated the concurrent effects of series resistance in both filter inductors in detail. This paper analyzes LCL filters by considering series resistance in both filter inductors; it proposes an active damping method based on the virtual series resistance of LCL filters. The performance of the proposed active damping is then verified through both simulation and experiment using Hardware-in-the-Loop Simulator(HILS).

• 한국산업정보학회논문지
• /
• 제15권2호
• /
• pp.11-16
• /
• 2010

본 논문에서는 180도 방위 빔 커버리지 특성을 갖는 소형의 고이득 빔 조향 기생 배열 안테나를 제안한다. 이 안테나는 단일면 야기 다이폴 급전소자와 리액턴스가 장하된 인접한 두 기생 다이폴 소자로 구성되며 제작된 안테나는 기생소자의 리액턴스를 전자적으로 변화시킴으로써 UNII 대역에서 (5.725GHz~5.825GHz) 방위각$-90^{\circ}$에서 $90^{\circ}$범위에서 5.2dB~6.7dB 이득 특성을 가지며, 반사손실은 -10dB이하임을 측정을 통해 확인하였다.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.148-162
• /
• 1996

Bonding wires for high frequency device packaging have dominant parasitic inductances which limit the performance of semiconductor lasers. In this paper, the inductance sof bonding wires are claculated by the method of moments with incorporation of ohmic loss, and the wideband modulation characteristics are analyzed for ddifferent wire lengths and structures. We observed the modulation bandwidth for 1mm-length bonding wire lengths and structures. We observed the modulation bandwidth for 1mm-length bonding wire is 7 GHz wider than that for 2mm-length bonding wire. We also observed th estatic inductance calculation results in dispersive deviation of the parasitic inductance and the modulation characteristics from the wideband moment methods calculations. The angled bonding wire has much less parasitic inductance and improves the modulation bandwidth more than 6 GHz. This calculation resutls an be widely used for designing and packaging of high-speed semiconductor device.

• 전자공학회논문지
• /
• 제52권10호
• /
• pp.33-46
• /
• 2015

본 논문에서는 ITRS(International Technology Roadmap for Semiconductors)를 따라 스케일 다운된 FinFET 소자의 디지털 및 아날로그 회로의 성능을 예측했다. 회로 성능의 정확한 예측을 위해 기생 커패시턴스와 기생 저항 모델을 개발해 3D Technology CAD 해석 결과와 비교해 오차를 2 % 미만으로 달성했다. 기생 커패시턴스 모델은 conformal mapping 방식을 기반으로 모델링 되었으며, 기생 저항 모델은 BSIM-CMG에 내장된 기생 저항 모델을 핀 확장 영역 구조 변수($L_{ext}$) 변화에 따른 기생 저항 성분 변화를 반영 할 수 있도록 개선했다. 또한, 공정 단위 변화에 대해 소자의 전압전류의 DC 특성을 반영하기 위해 BSIM-CMG 모델의 DC 피팅을 진행하는 알고리즘을 개발했다. BSIM-CMG에 내장된 기생 모델을 본 연구에서 개발한 저항과 커패시턴스 모델로 대체해 압축 모델 내부에 구현하여, SPICE 시뮬레이션을 통해 스케일 다운된 FinFET 소자의 $f_T$, $f_{MAX}$, 그리고 링 오실레이터와 공통 소스 증폭기의 기생 성분으로 인한 특성변화를 분석했다. 정확한 기생 성분 모델을 적용해 5 nm FinFET 소자까지 회로 특성을 정량적으로 제시했다. 공정 단위가 감소함에 따라 소자의 DC 특성이 개선될 뿐만 아니라 기생 성분의 영향이 감소하여, 회로 특성이 향상됨을 예측했다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.466-469
• /
• 2004

In this paper, we improve the matching impedance of antennas by inserting parasitic slots on the ground plane of right-angle triangular slot antennas. The designed antennas characteristics are analyzed by using Finite Different Time Domain (FDTD) method, the specific design frequency is 10 GHz and match impedance is 50 ohms. Simulation results show that the efficient of return loss and radiation patterns are improved and enhance. In this case, the right-angle triangular slot antennas with parasitic slots have matching impedance better than antennas without parasitic slots.

• Journal of electromagnetic engineering and science
• /
• 제7권3호
• /
• pp.116-121
• /
• 2007

Novel design of a wideband monopole antenna for DVB-H service is presented. The proposed antenna is designed based on a monopole antenna. It consists of folded monopole and parallel parasitic element. The folded segment of the folded monopole makes the antenna shorter. The length of the parasitic element obtains additional resonance frequencies. The gap distance between the folded monopole and the parasitic element is a key parameter to control impedance matching for wideband operation. The antenna has wide band performance, good impedance and radiation characteristics from 470 MHz to 870 MHz. The measured return loss for operating frequencies over DVB-H band is better than 10 dB. Good radiation patterns are also obtained. The measured results are compared with calculated results using Ansoft HFSS(High Frequency Structure Simulator).

• Journal of electromagnetic engineering and science
• /
• 제4권1호
• /
• pp.8-12
• /
• 2004

In this paper, a triple-band printed dipole antenna using parasitic elements is proposed for the multiple wireless services. The proposed antenna is designed and experimentally analyzed at the bands of PCS, IMT-2000, and ISM services. To achieve triple frequency operation, the proposed antenna contains two parasitic elements, which act as additional resonators by coupling from the driving dipole antenna. From the measured results, the resonant frequencies of this antenna are 1.79 ㎓, 2.03 ㎓, and 2.41 ㎓ and the measured impedance bandwidths are 90 MHz(1760∼1850 MHz), 210 MHz(1,930∼2,130 MHz), and 30 MHz(2,400∼2,430 MHz) for VSWR<2. The measured antenna gains are 2.14 ㏈i, 0.9 ㏈i, and 0.5 ㏈i, respectively. Antenna parameters for trifle-band operation are investigated and several antenna characteristics are discussed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.155-156
• /
• 2007

A wideband monopole antenna using a parasitic branch is proposed for allowing operations at multiple frequency bands specified in GSM($824{\sim}894MHz$), PCS($1750{\sim}1870MHz$), WiBro($2.3{\sim}2.4GHz$), WLAN/ISM ($2.4{\sim}2.48GHz$) and SDMB($2.605{\sim}2.655GHz$). We have used two branch monopoles and the one parasitic branch. Prototype of the multiband antenna have been successfully implemented and good radiation characteristics the operating frequency bands have been obtained. The effect of a parasitic branch was also studied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.47-48
• /
• 2006

In this paper, intrinsic n channel MOSFETs with external parasitic components are modeled. Using sensitivity analysis, effective parasitic components are tested and the optimized model is extracted. The extracted model is fitted to the measured S-parameters with different channel width. Based on this methodology, this method, external parasitic components that affect MOSFET operations can be analyzed and modeled.