• Communications for Statistical Applications and Methods
• /
• 제27권2호
• /
• pp.177-187
• /
• 2020

This article is concerned with the issue of forecasting and evaluation of threshold-asymmetric volatility models for time series of count data. In particular, threshold integer-valued models with conditional Poisson and conditional negative binomial distributions are highlighted. Based on the parametric bootstrap method, some evaluation measures are discussed in terms of one-step ahead forecasting. A parametric bootstrap procedure is explained from which directional measure, magnitude measure and expected cost of misclassification are discussed to evaluate competing models. The cholera data in Bangladesh from 1988 to 2016 is analyzed as a real application.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.642-649
• /
• 2010

This study was designed to generate briefs pattern for women in their twenties using 3D parametric body model. 151 women in their 20's were random sampled and measured using Martine's anthropometry. And one subject was chosen as the representative subject for 3D scanning. Parametric model was generated of using CATIA P3, Unigraphics NX4.0, Rapidform 2006. And the 3D surface of parametric body model was flattened onto the 2D plane. 3 downscale ratios(0%, 10%, 15%) were applied to generated pattern to figure out what downscale ratio was suitable to make briefs with stretch fabric. 4 kinds of experimental briefs were made with stretch fabrics(0%, 10%, 15% downscale) and worn on the dressform. Subjective evaluation on the appearance was done and the data was analyzed by ANOVA with post-hoc test. Briefs pattern was generated through the process of flattening the parametric surface and arranging the patches to make briefs pattern by dart manipulation. The different ration of outline and area between 3D surface and 2D pattern were 0.22% and 0.09% respectively. It showed that a parametric model could provide a desirable pattern with minute size error. The results of subjective evaluation on the appearance of 4 experimental briefs showed that stretch briefs with 15% downscale ratio was evaluated most highly in most items. Findings imply that it is feasible to apply 3D parametric model to generate patterns for various items considering various fabric properties.

• 대한수학회보
• /
• 제61권4호
• /
• pp.1033-1051
• /
• 2024

In this paper, we define a parametric variant of generalized Euler sums and construct contour integration to give some explicit evaluations of these parametric Euler sums. In particular, we establish several explicit formulas of (Hurwitz) zeta functions, linear and quadratic parametric Euler sums. Furthermore, we also give an explicit evaluation of alternating double zeta values ${\zeta}({\bar{2j}};\,2m+1)$ in terms of a combination of alternating Riemann zeta values by using the parametric Euler sums.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.19-25
• /
• 2017

A design methodology for parametric design optimization of washing machine door is presented. We develop a motion simulator and a robotic door to simulate the various motion of washing machine doors. The motion of the washing machine door is related to hinge parameters. Springs and dampers are usually used in the hinge of washing machine door for controlling motion of the door. A physical simulator of the door motion is used for finding candidate parameters of the hinge and a robotic door whose motion is controlled algorithmically is used for consumer tests. Through the consumer evaluation on the robotic motion, the optimized parameters are determined. We find the optimal parameters as a function of angle and angular velocity of the door.

• 한국CDE학회논문집
• /
• 제1권1호
• /
• pp.45-55
• /
• 1996

This paper presents a new approach to non-parametric modeling of cutter swept surface (CSS) for cutting simulation. Instead of explicitly modeling cutter swept volumes, silhouette curves of the cutter surface are utilized in computing the z-value of the CSS at a grid point on the x,y-plane. The non-parametric evaluation of the CSS constitutes the integral part of 3-axis cutting simulation. The proposed method is more efficient than the existing ones in the case of conventional cutters (i.e., ball-end mills and flat-end mills), and more importantly, it enables the non-parametric modeling of the CSS for the round-end mills which was not possible with the existing methods.

• 한국BIM학회 논문집
• /
• 제10권3호
• /
• pp.22-32
• /
• 2020

Apartment building site planning is one of time consuming and labor-intensive tasks in architectural design field, due to its complexity in zoning regulations, building codes, local restrictions, and site-specific conditions. In other words, the process can be seen as a very complicated mathematical function with layers of variables and parameters, which ironically can be automated using computational methods on parametric tools. In this paper, a practical method of automating site planning of an apartment complex has been proposed by utilizing parametric approaches in Rhino 3D and Grasshopper. Two primary parameters, building heights and positions, determine the efficacy of building layouts under all regulatory standards, thus testing out numerous combinations of the two will produce some successful layout alternatives. For this, equation solver has been used for iterating the parametric model to sort out meaningful results among others. It also has been proven that the proposed process significantly reduced the time in site planning down to less than an hour on most cases, and many successful alternatives could be obtained by using multiple computers. Post evaluation processes such as day light and view shed analysis helped sort out the best performing ones out of functioning alternatives.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.375-388
• /
• 2017

Prior to modern seismic provisions, several bridges were not designed for seismic actions in moderate seismic areas. Precast multi-girder and slab bridges are typical highway overpass structures; they have a significant contribution to national bridge stocks. Since the seismic behavior is questionable, a preliminary parametric study is conducted to determine critical configurations and components. The results indicate that the behavior of the abutments, backfill soil, superstructure and foundation is normally satisfactory; however, the superstructure-abutment joints are critical for both single- and multi-span bridges, while the piers are also critical for longer multi-span configurations. The parametric results provide a solid basis both for detailed seismic assessment and development of design concepts of newly built structures in moderate seismic zones.

• 산업경영시스템학회지
• /
• 제23권57호
• /
• pp.87-92
• /
• 2000

This paper describes a three dimensional parametric modeling system for transmission gears of tractor. In conventional design and manufacturing, information about three dimensional shapes has been described in engineering drawings. However drawing based design presents several problems; 1) communication errors between the designer and the modeller or manufacturer. 2) time taken and costs incurred in the design process. To solve these problems the system of parametric design based modeling has been proposed. Developed system in this paper consists of four steps; 1) parametric design of transmission gears with a solid modeler. 2) evaluation of gear geometry and strength. 3) dynamic simulation for gear interference check. 4) gear stress analysis with a CAE software. The proposed system has been tested in the fields and found to be a useful system.

• 한국지반신소재학회논문집
• /
• 제11권4호
• /
• pp.71-77
• /
• 2012

본 연구에서는 지반구조물에서 수집된 계측데이터를 대상으로 확률통계적 방법을 사용한 상태평가를 위한 분석기법과 자동화 프로그램을 개발하였다. 복잡한 지반구조물에 설치한 계측시스템으로부터 수집된 계측자료의 평가를 위해서는 자료처리(data driven) 기반의 비모수적(non-parametric) 모델링 방법이 유용할 것으로 판단된다. 실제 지반구조물(보강토옹벽 및 터널)에서 수집된 센싱 데이터를 이용하여 개발된 평가기법의 검증을 실시한 결과 환경적 요인과는 구별되는 구조적 거동을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.853-858
• /
• 2008

유도가열 전기보온 압력밥솥의 체결 구조는 오븐, 상부 가열판, 체결 링으로 구성되며, 기존의 밥솥과 달리 내부에 압력이 작용하기 때문에 안전성 검토가 반드시 필요하다. 본 연구에서는 유한 요소법을 이용하여 밥솥의 체결 구조인 오븐, 상부 가열판, 체결 링에 대하여 구조해석을 수행하고 구조적으로 안전한 최적 두께를 산출한다. 특히, 오븐은 스테인레스와 알루미늄이 겹쳐서 성형된 제품이므로 복합재료 해석을 수행하고, 안전성 평가를 위하여 von Mises법과 Tsai-Wu법을 도입한다. 오븐과 상부 가열판의 최적 두께 산출을 위하여 설계 변수법을 적용한다.