• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.104-110
• /
• 2006

In this paper, we proposed the micro web-server implementation on Strong ARM processor with embedded Linux. The parallel port connecting parallel I/O is controlled via HTTP protocol and web browser program HTTP protocol with Linux, the micro web server program and port control program are installed on-board memory using CGI to be accessed by web browser. The processor parallel input port is monitored and parallel output port is controlled from remote hosts via HTTP protocol. The result of the proposed embedded micro-web server can be used in remote automation systems, distributed control via internet using web browser.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.176-177
• /
• 2001

Three nearly identical superconducting fault current limiters (SFCLs) were connected in series to increase the voltage ratings. A slight difference in the quench starting point of individual SFCL units produced significantly imbalanced power distribution when connected in series. The imbalance was successfully removed by connecting a shunt resistor to one SFCL in parallel. 1.2 kV SFCL was designed with five current limiting elements and two or three shunt resistors.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1426-1430
• /
• 2009

AC AT feeding method consists return circuits of electric train inserting in parallel between trolly line and feeding line and connecting neutral line to rail and FPW. Due to increasing electric load at feeding system, collecting voltage of train and end voltage are going down. So to increase voltage between trolly line and rail, the usefulness of new autotransformer are considered which variation of short impedance and change of line voltage is simulated with modified winding ratio of autotransformer from 1:1 to variable tab.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.86-91
• /
• 1993

C5H6N3O2+ H2Po4-, Mr=2 2 1. 6 9 3, Orthorhombic, Pna21, a=25.680(3)A, b=6.234(1)A, V=908.23A3, Z=4, Dx=1.734Mgm-3, λ(MoKa)=0.7169A, μ=2.60-1mm F(000)488, T=297K, final R=0.0328 for 881 independent reflection. The crystal contains parallel to the b-c Plance(the cleavage plane) and stacks of 2-amino-5 -nitropryridinium (2A5NP+) ions connecting the phosphate planes.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.367-369
• /
• 1996

This paper proposed that a buck type AC-DC Converter for high power factor operates with four chopper connecting a number of parallel circuit. And, some simulative results on computer is included to confirm the validity of the analytical results.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.697-700
• /
• 2002

In this paper, we proposed the micro web-server Implementation on Strong ARM processor with embedded Linux. The parallel port connecting parallel I/O is controlled via HPPT protocol and web browser program. HTTP protocol is ported into Linux and the micro web server program and port control program are installed on-board memory using CGI to be accessed by web browser, such as Internet Explore and Netscape. 8bit LED and DIP switches are connected to the processor port and the switch input status is monitored and the LED output is controlled from remote hosts vie internet. The result of the proposed embedded micro-web server can be used in automation systems, remote distributed control via internet using web browser.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2672-2674
• /
• 2003

In this paper, web based monitoring systems are implemented using embedded systems. A parallel port connecting parallel I/O is controlled via HTTP protocol and web browser program. HTTP protocol is ported into Linux. A micro web server program and port control program installed on-board memory using CGI to be accessed by web browser. Experimental results of proposed web based monitoring systems can be used in automation systems and remote distributed control systems via internet using web browser.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1219-1221
• /
• 2005

We improved quench properties of a superconducting fault current limiter(SFCL) components based on YBCO thin films. This consists of three components with nearly identical properties and one with slightly difference properties. The units were connected in series and first of parallel to increase the current and voltage ratings. It have caused significantly imbalanced power distribution. The imbalance remarkably improved by connecting a shunt reactor to the SFCL component in parallel.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2019

In this paper, we implemented a Wi-Fi based cluster system using raspberry pi for multidisciplinary education. The cluster implementation on the desktop was more difficult to maintain the complexity, big size, high price, power consumption as the number of nodes increased. In this paper, we implemented a cluster using Raspberry Pi, which is developed for educational purposes, to reduce the cost of connecting nodes. In addition, the complexity of system construction is reduced by replacing the connection between each node with Wi-Fi. Also, the inconvenience of configuration due to node increase was reduced. It is expected that the implementation of the cluster will be a good alternative in the educational environment where distributed processing and parallel processing are performed in the embedded environment. Also, it is confirmed that it can be applied to the multidisciplinary education.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.633-639
• /
• 2006

High temperature superconductor (HTS) winding coil is one of the key component in superconducting device fabrication. Double-pancake style coils are widely used for such application. High resistance between pancake coils greatly affects the machine design, operating condition and thus the stability. In order to reduce such resistance, experimentalists are looking for efficient and damage free coil connecting methods. In this respect, here we proposed parallel joining method to connect the coils. This is to do crossly joining with HTS tapes on two parallel HTS tapes. Joint samples between two parallel HTS tapes were prepared by using HTS tapes and current-voltage (I-V) characteristic curves were investigated at liquid nitrogen temperature i.e., 77.3 K. A 20 cm length joint connected between two parallel HTS tapes shows $32.5n{\Omega}$, for currents up to 250 A. A small HTS magnet, having two double pancake sub-coils connected together through new parallel joint method was fabricated and their current-voltage (I-V) characteristic curve was investigated. At 77.3K, critical current(Ic) of 97 A and resistance of $55n{\Omega}$ for currents upto 130 A were measured. At operating current 86 A lower than Ic, Joule heats generated in whole magnet and at joint region between sub-coils were 226 mW and 0.4 mW, respectively. Low Joule heat generation suggests that this joining method may be used to fabricate HTS magnet or windings.