• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.128-137
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger by using the parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. 0247164, offered by Korean Intellectual property Office). The trial manufactures were made from Aloo-heat which was 600mm, 700mm length respectively, and It were welded to the end "U" type in order to direct flow of the underground water. The performance test was carried out under the condition of open space and room temperature with the change of flow rate of the underground water and air. The results are as follows. 1. The trial manufactures had convection heat value from 33 to 156 W/m²℃, and It was coincided with design assumption. 2. The amount of energy transfer was increased with the increment of the area of heat transfer, the air flow, the gap of temperature inlet & outlet the underground water and the air. 3. The heat value was 6,825W when the air flow was 6,000m³/h and the gap of temperature between inlet and outlet of the underground water was 6℃, and It dropped from 25.8℃ to 23.2℃(-2.6℃ difference). The convection heat value was 88.5W/m²℃. 4. The heat value was 2.625W when the air flow was 4,000m³/h and the gap of temperature between inlet and outlet the underground water was 2℃, and It dropped from 27℃ to 22.5℃(-4.5℃ difference). The convection heat value was 33.6W/m²℃. 5. Correlation values(R²) of the testing heat values of the trial manufacture type I, II, and III were 0.9141, 0.8935, and 0.9323 respectively, and correlation values(R²) of the amount of the air flow 6,000m³/h, 5,000m³/h, 4,000m³/h were 0.9513, 0.9414, and 0.9003 respectively.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.197-218
• /
• 2019

In addition to economic growth and national income increase, China is also experiencing rapid growth in consumption of cosmetics. About 67% of the total trade volume of Chinese cosmetics is made by e-commerce and especially K-Beauty products, which are Korean cosmetics are very popular. According to previous studies, 80% of consumer goods such as cosmetics are affected by the word of mouth information, searching the product information before purchase. Mostly, consumers acquire information related to cosmetics through comments made by other consumers on SNS such as SINA Weibo and Wechat, and recently they also use information about beauty related video channels. Most of the previous online word-of-mouth researches were mainly focused on media itself such as Facebook, Twitter, and blogs. However, the informational characteristics and the expression forms are also diverse. Typical types are text, picture, and video. This study focused on these types. We analyze the unstructured data of SINA Weibo, the SNS representative platform of China, and Meipai, the video platform, and analyze the impact of K-Beauty brand sales by dividing online word-of-mouth information with quantity and direction information. We analyzed about 330,000 data from Meipai, and 110,000 data from SINA Weibo and analyzed the basic properties of cosmetics. As a result of analysis, the amount of online word-of-mouth information has a positive effect on the sales of cosmetics irrespective of the type of media. However, the online videos showed higher impacts than the pictures and texts. Therefore, it is more effective for companies to carry out advertising and promotional activities in parallel with the existing SNS as well as video related information. It is understood that it is important to generate the frequency of exposure irrespective of media type. The positiveness of the video media was significant but the positiveness of the picture and text media was not significant. Due to the nature of information types, the amount of information in video media is more than that in text-oriented media, and video-related channels are emerging all over the world. In particular, China has made a number of video platforms in recent years and has enjoyed popularity among teenagers and thirties. As a result, existing SNS users are being dispersed to video media. We also analyzed the effect of online type of information on the online cosmetics sales by dividing the product type of cosmetics into basic cosmetics and color cosmetics. As a result, basic cosmetics had a positive effect on the sales according to the number of online videos and it was affected by the negative information of the videos. In the case of basic cosmetics, effects or characteristics do not appear immediately like color cosmetics, so information such as changes after use is often transmitted over a period of time. Therefore, it is important for companies to move more quickly to issues generated from video media. Color cosmetics are largely influenced by negative oral statements and sensitive to picture and text-oriented media. Information such as picture and text has the advantage and disadvantage that the process of making it can be made easier than video. Therefore, complaints and opinions are generally expressed in SNS quickly and immediately. Finally, we analyzed how product diversity affects sales according to online word of mouth information type. As a result of the analysis, it can be confirmed that when a variety of products are introduced in a video channel, they have a positive effect on online cosmetics sales. The significance of this study in the theoretical aspect is that, as in the previous studies, online sales have basically proved that K-Beauty cosmetics are also influenced by word-of-mouth. However this study focused on media types and both media have a positive impact on sales, as in previous studies, but it has been proven that video is more informative and influencing than text, depending on media abundance. In addition, according to the existing research on information direction, it is said that the negative influence has more influence, but in the basic study, the correlation is not significant, but the effect of negation in the case of color cosmetics is large. In the case of temporal fashion products such as color cosmetics, fast oral effect is influenced. In practical terms, it is expected that it will be helpful to use advertising strategies on the sales and advertising strategy of K-Beauty cosmetics in China by distinguishing basic and color cosmetics. In addition, it can be said that it recognized the importance of a video advertising strategy such as YouTube and one-person media. The results of this study can be used as basic data for analyzing the big data in understanding the Chinese cosmetics market and establishing appropriate strategies and marketing utilization of related companies.

• Economic and Environmental Geology
• /
• v.6 no.4
• /
• pp.201-216
• /
• 1973

Being believed thus far to be distributed in the wide areas in the vicinity of Seoul, the capital city of Korea, the Yonchon System in its type locality in Yonchon-gun from which the name derived was never previously traced down or correlated to the Precambrian metamorphic complex in Seoul area where the present study was carried out. Due to in accessibility to Yonchon area, the writer also could not trace the system down to the area studied so as to correlate them. The present study endeavored to differentiate general stratigraphy and interprete the structure of the metamorphic complex in the area. In spite of the complexity of structure and rapid changes in lithofacies of the complex, it was succeeded to find out the key bed by which the stratigraphy and structure of the area could be straightened out. The keybeds were the Buchon limestone bed in the western parts of the area; Daisongri quartzite bed cropped out in the southeastern area; Jangrak quartzite bed scattered in the several localities in the northwest, southwest, and eastern parts of the area; and Earn quartzite bed isolated in the eastern part of the area. These keybeds together with the broad regional structure made it possible to differentiated the Precambrian rocks in ascending order into the Kyonggi metamorphic complex, Jangrak group and Chunsung group which are in clinounconformable relation, and the first complex were again separated in ascending order into Buchon, Sihung, and Yangpyong metermorphic groups. Althcugh it has being vaguely called as the Yonchon system thus far, the Kyonggi metamorphic complex have never been studied before. The complex might, however, belong to early to early-middle Precambrian age. The Jangrak and Chunsung group were correlated to the Sangwon system in North Korea by the writer (1972), but it became apparent that the rocks of the groups have different lithology and highly metamorphosd than those of the Sangwon system which has thick sequence of limestone and slightly metamorphosed. Being deposited in the margin of the basin, it is natural that the groups poccess terrestrial sediments rather than limestone, yet no explanation is at hand as to what was the cause of bringing such difference in grade of metamorphism. Thus the writer attempted to correlate the both groups to those of pre-Sangwon and post-Yonchon which might be middle to early-late Precambrian time. Judging from difference in grade of deformation and unconformity between the Kyonggi metamorphic complex, Jangrak group, and Chunsung group, three stages of orogeny were established: the Kyonggi, Jangrak orogenies, and Chunsung disturbance toward younger age. It is rather astonishing to point out that the structure of these Precambrian formations. was not effected by Daebo orogeny of Jurassic age. The post-tectonic block faulting was accompanied by these orogenies, and in consequence NNE and N-S trending faults were originated. These faulting were intermittented and repeated until Daebo orogeny at which granites intruded along these faults. The manifestation of alignment of these faults is indicated by the parallel and straight linear development of valleys and streams in the Kyonggi Massifland.

• Korean Journal of Optics and Photonics
• /
• v.26 no.3
• /
• pp.162-167
• /
• 2015

In this paper, we developed a MTF (Modulation Transfer Function) measurement system using a knife-edge scanning method for infrared optics. It consists of an objective part to generate the target image, a collimator to make the beam parallel, and a detector to analyze the image. We used a tungsten filament as the light source and MCT (Mercury Cadmium Telluride) to detect the mid-infrared(wavelength $3-5{\mu}m$) image. We measured the MTF of a standard lens (f=5, material ZnSe) to test this instrument and compared the result to the theoretical value calculated using the ZEMAX commercial software. It was found that the difference was within ${\pm}0.035$ at the cut-off frequency (50 1/mm). Also, we calculated the A-type measurement uncertainty to check the reliability of the measurement. The result showed only 0.002 at 20 1/mm in spatial frequency, which means very little variation in the MTF measurement under the same conditions.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.51-62
• /
• 2003

This paper presents a novel survivor memeory management and decoding techniques with sequential backward state transition control in the trace back Viterbi decoder. The Viterbi algorithm is an maximum likelihood decoding scheme to estimate the likelihood of encoder state for channel error detection and correction. This scheme is applied to a broad range of digital communication such as intersymbol interference removing and channel equalization. In order to achieve the area-efficiency VLSI chip design with high throughput in the Viterbi decoder in which recursive operation is implied, more research is required to obtain a simple systematic parallel ACS architecture and surviver memory management. As a method of solution to the problem, this paper addresses a progressive decoding algorithm with sequential backward state transition control in the trace back Viterbi decoder. Compared to the conventional trace back decoding techniques, the required total memory can be greatly reduced in the proposed method. Furthermore, the proposed method can be implemented with a simple pipelined structure with systolic array type architecture. The implementation of the peripheral logic circuit for the control of memory access is not required, and memory access bandwidth can be reduced Therefore, the proposed method has characteristics of high area-efficiency and low power consumption with high throughput. Finally, the examples of decoding results for the received data with channel noise and application result are provided to evaluate the efficiency of the proposed method.

• Journal of The Korean Association of Information Education
• /
• v.20 no.6
• /
• pp.629-644
• /
• 2016

The purpose of this study was to investigate the effects of whole-task sequencing emphasis manipulation on expertise acquisition in web based complex task. To achieve the purpose, emphasis manipulation sequencing type is composed of a simple emphasis manipulation, a snowballing manipulation, and a full emphasis manipulation sequencing and participants was drawn from a pool of 93 undergraduate students sampled for the study. According to the findings, a snowballing manipulation group invested significantly lower cognitive load than a full emphasis manipulation group but did not a simple emphasis manipulation group. Based on these findings, though complex task is included of high interactivity owing to real task, learner cannot suffer cognitive overload because emphasis manipulation which can view the whole task and the part task in parallel provides meta cognition for learner. And whole-task sequencing emphasis manipulation affects to transfer. The snowballing emphasis manipulation group invested significantly higher than simple emphasis manipulation group and full emphasis manipulation group. Based on these findings, the snowballing manipulation which learner use whole-task sequencing and part-task sequencing simultaneously contribute to understandings and ability to solve problems for complex task and it will in turn, lead to expertise acquisition.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.233-249
• /
• 1999

Primary fixation is one of the most important factor in establishing adequate osseointegration between implant and bone. To evaluate the initial healing response of bone around implants without primary bone contact, this study was designed to create considerable space between implant and bone in 5 mongrel dogs, about 1-year old. After 3 holes of 6.0mm in diameter were prepared at the femur neck of the dogs, commercially pure titanium thread type implants(STERI-$OSS^{(R)}$), 8mm in length and 3.8mm, 5.0mm and 6.0mm in diameter, were inserted. Implants were supported by only nonresorbable membrane($Teflon^{(R)}$), and the penetration of upper soft tissue into the gap was inhibited by it. The each implant was positioned in the center of the drilled hole. 9 implants with different diameters were inserted in 3 dogs for histologic observation, and 12 were inserted in 2 dogs for mobility test and removal torque test.Fluorescent dyes were injected in order of Doxycycline, Alizarin Red S, and Calcein at intervals of 2 weeks. At 4-, 8-, and 12-week after placement, 3 dogs were sacrificed for histologic observation, and at 8- and 12-week after placement, 2 dogs were sacrificed for mobility test using $Periotest^{(R)}$ (Simens AG, Bensheim, Germany) and torque test using Autograph AGS-1000D $series^{(R)}$(Japan). The result were as follows: 1. The wider the gap between bone and implant was, the less bone maturity was, and the later osseointegration was occurred. Trabecular direction of new bone around implant was changed from parallel to perpendicular to the implant, and the gap was filled with new bone, over time. 2. There was a decreasing tendency over time in the mobility of all implants, but the wider gap between bone and implant was, the smaller decrease of the mobility was. 3. There was a increasing tendency over time in the removal torque gauge of all implants, and the wider gap was, the smaller increase of the removal torque gauge was. The results suggest that osseointegration in case of implant without primary bone contact may be obtained by guided bone regeneration technique with prolonged healing period, but the time of second surgery should be considered carefully.

• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.65-66
• /
• 2004

There have been groves, in many cases, along with hedgerows and remnant forests around a traditional Korean village. A village grove is very closely connected to the life of residents. Sometimes it was a holy place where important village festivals were held, and became a resting place for farmers, especially in sunny summer. As a matter of fact, it is noted that traditional Korean village groves had been fostered for many purpose as religion, Confucianism, scenery, sanitation, traffic guard, public security, agriculture, hunting, and military and public uses were included in Chosun Govemor General(1938). Village groves were usually located at the outlet of watershed inside which a village was built. In addition, village groves used to be established along part of mountain ranges, streams and streets. A unique type of village grove, called bibosoop was fostered especially where the outlet of watershed was largely opened. In other cases, it was placed where a part of mountain range was relatively low, or where village residents were likely to see ugly objects such as a huge cliff, stony upland with an unvegetated area and the like(Kim and Jang 1994). In a sense, a sheltebelt is a sort of bibosoop as it is a landscape element to complement places that are exposed to strong winds. However, it is comparable to other typical bibosoop that is situated at a topographically very specific zone of watershed. In this paper, we will address potential functions of Korean village groves from a perspective of modern landscape ecology and show current status of some remnants, based on preliminary surveys. A village grove functions as barrier or filter of objects such as water, nutrients, and other elements and habitat of wildlife (park et al. 2003, Lee 2004). The village grove slows down the flow of water and air, maintains soil moisture an hinders soil erosion, enabling cultivation of crops and bringing up creatures nearby. It contributes to enhancing biodiversity. Birds rest on shrubby and woody trees of the element. Presumably, other organisms may also inhabit the village groves and take advantage of it when those move from a forest patch to others. Emerging insects acclimate themselves in the shade of the green space before they fly to sunny air. Besides the village grove acts as a component of agroforestry system as leaf litter is shed from a grove to an asjacent agricultural area, and transformed into green manure(Lee 2004). By the way, many of the landscape elements were destroyed or declined in Koea during the past several decades. The losses have been parallel or linked to environmental degradation. Unfortunately, we have a little reliable data as for how many groves have disappeared in Korea until now. There has been no complete census on the village groves in Korea, and the viewpoints of survey were to a degree different depending on surveyors. So, it is difficult to analyze the temporal and spatial change of village groves. Currently, national inventory data of Korean village groves are available in three reports. We reviewed the locations of village groves and arranged those according to the present administrative units, DONG. With the limited data, we found that at least 484 of village groves were recorded in South Korea. Among all provinces, village groves were most in Gyeongsanbuk-Do Province and least in Chungcheongbuk-Do Province(Table 1). This is a preliminary report prepared while some quantitative data regarding functions and lossers of the village groves are being collected. More detailed data will be introduced in the near future.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• Economic and Environmental Geology
• /
• v.27 no.1
• /
• pp.65-80
• /
• 1994

The Tertiary $Ch{\check{o}}ngja$ basin is located in the southeastern coastal area of the Korean Peninsula. It is a lozenge shaped fault-bounded basin with circa $5{\times}5km$ areal extent, isolated from other Tertiary basins by the Cretaceous Ulsan Formation in-between. The northwestern boundary of the basin is a domino/listric type normal fault trending $N30^{\circ}E$, whereas its southwestern boundary is a dextral strike-slip fault (trending $N20^{\circ}W$) with a lateral offset of more than 1 km. The basin is bounded by the East Sea on the eastern margin. Basin-fills consist of extrusive volcanic rock (Tangsa Andesites) of Early Miocene (16~22 Ma in radiometric age), unconsolidated fluviatile conglomerate (Kangdong Formation) and shallow brackish-water sandstone ($Sinhy{\check{o}}n$ Formation). The latter yields abundant Vicarya-Anadara molluscan fossils of early Middle Miocene age. The Tertiary strata become younger toward the northwestern boundary-fault of the basin, showing a zonal distribution pattern parallel to the fault: the younger sedimentary formations occupy a narrow zone of 2 km width along the northwestern boundary-fault, whereas the older Tangsa Andesites underlie them unconformably in the eastern and southeastern portions of the basin. The strata in the basin, including the Tangsa Andesites, are tilted (about $20^{\circ}$) toward the northwestern boundary-fault Sedimentary strata thicken toward the boundary-fault, forming a wedge shaped half-graben structure. A number of small-scale syndepositional normal growth faults and graben structures are observed in the sedimentary strata. These extensional structures have the same trend as the normal northwestern boundary-fault which we interpret as a pull-apart detachment fault. These characteristics imply persistent extension during the basin evolution, caused by a NW-SE directed tensional force. The $Ch{\check{o}}ngja$ basin is, thus, a kind of syndepositional tectonic basin evolved in a strike-slip (pull-apart) regime. The latter was caused by a dextral simple shear associated with the NNW-SSE opening of the East Sea. In view of the fact that the normal growth faults do not cut through the uppermost portion of the youngest $Sinhy{\check{o}}n$ Formation, it is inferred that the tensional force came to be inactive in the early Middle Miocene. This is coincident in timing with the termination of the East Sea opening (15 Ma).