• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.110-119
• /
• 1996

A novel high speed VLSI architecture and its VLSI realization methodologies for a motion estimation processor based on full search block matching algorithm are presentd. The presented architecture is designed in order to be suitable for highly parallel and pipelined processing with identical PE's and adjustable in performance and hardware amount according to various application areas. Also, the throughput is maximized by enhancing PE utilization up to 100% and the chip pin count is reduced by reusing image data with embedded image memories. Also, the uniform and identical data processing structure of PE's eases VLSI implementation and the clock rate of external I/O data can be made slower compared to internal clock rate to resolve I/O bottleneck problem. The logic and spice simulation results of the proposed architecture are presented. The performances of the proposed architecture are evaluated and compared with other architectures. Finally, the chip layout is shown.

• Journal of KIISE:Software and Applications
• /
• v.26 no.10
• /
• pp.1178-1178
• /
• 1999

A spatial join has the property that its execution time exponentially increases in proportion to the number of spatial objects. Recently, there have been many attempts for improving the performance of the spatial join by using parallel processing schemes, In the case of executing parallel spatial join using the parallel machine with shared disk architecture, the disk bottleneck of parallel processing of spatial join worsens in comparison with sequential spatial join. This paper presents the algorithms of task creation and assignment to reduce the disk bottleneck caused by accessing the shared disk at the same time, and to minimize message passing between processors, This paper proposes object caching which is a higher level of abstraction than page caching, and uses it to do creation and assignment of tasks according to temporal and spatial localities for minimizing disk access time. The object caching shows the performance improvement of 50%. The task creation and assignment using localities gives the gain of 30% and 20%. Overall performance evaluation of the proposed algorithms shows 7.2 times speed up than those of sequential execution of spatial joins.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.39-46
• /
• 2022

The WK-recursive network proposed by Vecchia and Sanges[1] is widely used in the design and implementation of local area networks and parallel processing architectures. It provides a high degree of regularity and scalability, which conform well to a design and realization of distributed systems involving a large number of computing elements. In this paper, the routing of a message is investigated on the WK-recursive network, which is key to the performance of this network. We present an efficient shortest path algorithm on the WK-recursive network, which is simpler than Chen and Duh[2] in terms of design complexity.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.409-410
• /
• 2008

This paper presents nonlinear and parallel design for synchronous pipelining in IP-based H.264 decoder implementation. Since H.264 decoder includes the dataflow of feedback loop, the data dependency requires one NOP stage per pipelining latency to drop the throughput into 1/2. Further, it is found that, in execution time, the stage scheduled for MC is more occupied than that for CAVLD/ITQ/DF. The less efficient stage would be improved by nonlinear scheduling, while the fully-utilized stage could be accelerated by parallel scheduling of IP. The optimization yields 3 nonlinear {CAVLD&ITQ}|3 parallel (MC/IP&Rec.)| 3 nonlinear {DF} pipelined architecture for IP-based H.264 decoder. In experiments, the nonlinear and parallel pipelined H.264 decoder, including existing IPs, could deal with full HD video at 41.86MHz, in real time processing.

• Journal of the Korea Society for Simulation
• /
• v.1 no.1
• /
• pp.64-76
• /
• 1992

The DEVS(discrete event system specificaition) formalism specifies a discrete event system in a hierarchical, modular form. DEVSIM++ is a C++based general purpose DEVS abstract simulator which can simulate systems modeled by the DEVS formalism in a sequential environment. This paper describes P-DEVSIM++which is a parallel version of DEVSIM++ . In P-DEVSIM++, the external and internal event of DEVS models can by processed in parallel. For such processing, we propose a parallel, distributed optimistic simulation algorithm based on the Time Warp approach. However, the proposed algorithm localizes the rollback of a model within itself, not possible in the standard Time Warp approach. An advantage of such localization is that the simulation time may be reduced. To evaluate its performance, we simulate a single bus multiprocessor architecture system with an external common memory. Simulation result shows that significant speedup is made possible with our algorithm in a parallel environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.29-38
• /
• 2009

In this paper, a high performance pipelined computing design of parallel multiplier-temporal buffer-parallel accumulator is present for the convolution-based non-cascaded architecture aiming at the real time Discrete Wavelet Transform(DWT) processing. The convolved multiplication of DWT would be reduced upto 1/4 by utilizing the filter coefficients symmetry and the up/down sampling; and it could be dealt with 3-5 times faster computation by LUT-based DA multiplication of multiple filter coefficients parallelized for product terms with an image data. Further, the reutilization of computed product terms could be achieved by storing in the temporal buffer, which yields the saving of computation as well as dynamic power by 50%. The convolved product terms of image data and filter coefficients are realigned and stored in the temporal buffer for the accumulated addition. Then, the buffer management of parallel aligned storage is carried out for the high speed sequential retrieval of parallel accumulations. The convolved computation is pipelined with parallel multiplier-temporal buffer-parallel accumulation in which the parallelization of temporal buffer and accumulator is optimize, with respect to the performance of parallel DA multiplier, to improve the pipelining performance. The proposed architecture is back-end designed with 0.18um library, which verifies the 30fps throughput of SVGA(800$\times$600) images at 90MHz.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.23-28
• /
• 2002

In this paper, we have proposed the hardware architecture which implements the algorithm for retaining the connectivity which prevents the disconnection in the gray-scale image thinning. To extract the skeleton from the image in a real time, it is necessary to examine the connectivity of the skeleton in a real time. The proposed architecture finds the connectivity number in the 4-clock period. The architecture consists of three blocks, PS(Parallel to Serial) Converter and Stare Generator and Ridge Checker. The PS Converter changes the 3$\times$3 gray level image to four sets of image pixels. The State Generator examines the connectivity of the central pixel by searching the data from the PS Converter. The Ridge Checker determines whether the central pixel is on the skeleton or not. The proposed architecture finds the connectivity of the central pixel in a 3$\times$3 gray level image in the 4-clocks. The total circuits are verified by the design tools and operate correctly.

• Journal of The Korean Astronomical Society
• /
• v.51 no.3
• /
• pp.65-71
• /
• 2018

The near real-time speckle masking reconstruction technique has been developed to accelerate the processing of solar images to achieve high resolutions for ground-based solar telescopes. However, the reconstruction of solar subimages in such a speckle reconstruction is very time-consuming. We design and implement a new parallel speckle masking reconstruction algorithm based on the Compute Unified Device Architecture (CUDA) on General Purpose Graphics Processing Units (GPGPU). Tests are performed to validate the correctness of our program on NVIDIA GPGPU. Details of several parallel reconstruction steps are presented, and the parallel implementation between various modules shows a significant speed increase compared to the previous serial implementations. In addition, we present a comparison of runtimes across serial programs, the OpenMP-based method, and the new parallel method. The new parallel method shows a clear advantage for large scale data processing, and a speedup of around 9 to 10 is achieved in reconstructing one solar subimage of $256{\times}256pixels$. The speedup performance of the new parallel method exceeds that of OpenMP-based method overall. We conclude that the new parallel method would be of value, and contribute to real-time reconstruction of an entire solar image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.80-85
• /
• 2011

The mount of network traffic from the Internet is increasing because of the use of Broadband Convergence Networks(BcN). Network traffic is also increasing because of the development of application, especially multimedia traffic from IPTV, VOD, and online games. This multimedia traffic not only has a huge payload but also should be considered a threat in real time. For this reason, this study examines the ways that routers distribute the bandwidth in accordance to traffic properties. To classify the property of the traffic, it is essential to analyze the application layer. However, the general network processor architecture serially processes the L2-4 and L7 layer. We propose a novel parallel network processor architecture with a global cache that processes L2-4 and L7 in parallel. To verify the proposed architecture, we simulated both of the architecture with SystemC. EEMBC and SNORT was used to measure L2-4 and L7 processing time. When multimedia traffic was entered into the network processor in the same flow, the proposed architecture showed about 85% higher performance than general architecture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.23-32
• /
• 2007

This paper proposes a reconfigurable parallel processor architecture which can efficiently implement various multimedia applications, such as 3D graphics, H.264/H.263/MPEG-4, JPEG/JPEG2000, and MP3. The proposed architecture directly connects memories and processors so that memory access time and power consumption are reduced. It supports floating-point operations needed in the geometry stage of 3D graphics. It adopts partitioned SIMD to reduce hardware costs. Conditional execution of instructions is used for easy development of parallel algorithms.