• 한국컴퓨터정보학회논문지
• /
• 제13권2호
• /
• pp.221-233
• /
• 2008

일반적으로 병렬처리가 필요한 경우 병렬처리 전용으로 제조된 시스템을 사용하지만, 가까운 주위에서 쉽게 얻을 수 있는 PC들을 클러스터로 구축하여 병렬처리에 활용할 수도 있다. PC들을 클러스터로 구축하기 위한 가장 쉬운 방법은 PC들을 스위치 허브 중심의 스타 네트워크로 연결하는 방법이지만, 이 논문에서는 병렬처리 연구 및 활용에 더 적합하도록 8개의 PC들이 직접 연결된 클러스터 구축을 위한 TCP/IP 기반 하이퍼큐브 네트워크의 효율적인 구현 방안을 모색하고, 그 기능 및 효율성을 ping, netperf, MPICH 등의 도구를 이용하여 검증하였다. 구현 방안으로 링크 위주의 IP 설정 방법과 노드 위주의IP 설정 방법을 제안하고 두 방법을 비교 분석하였는데, 그 결과 두 방법간에 시간적 성능 차이는 없지만 라우팅 테이블의 단순화 측면에서 노드 위주의 IP설정 방법이 우수함을 볼 수 있었다. 기능적 측면을 검증하기 위하여 응용프로그램의 병렬처리 결과를 스타 네트워크 기반클러스터에서의 결과와 비교하였는데, 두 방법 모두 완벽한 병렬처리 환경을 지원하는 것으로 나타났다.

• Journal of information and communication convergence engineering
• /
• 제5권2호
• /
• pp.121-125
• /
• 2007

In this paper, a planar active retrodirective four-element array with subharmonic phase conjugation mixers based on anti-parallel diode pairs (APDPs) is designed, and its application in the auto-tracking duplex communication link is presented. As compared to previous phase conjugation mixers using twice RF frequency for LO frequency, the proposed conjugation mixers need only half RF frequency so that it can be easily applied for millimeter-wave applications. The proposed architecture, which conventionally performs the function of the transmission of an incident signal back in the direction of its source, is modified in order to include a receive function. Experimental verification of these architectures is performed at 1GHz and the results from the prototypes are compared with a theoretical model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.113-115
• /
• 2008

At the high speed operation, the high demagnetization voltage can reduce the negative torque, so the output power and efficiency can be improved. In this paper, a novel power converter for single phase SRM with high demagnetization voltage is proposed. A simple passive capacitor circuit is added in the front-end, which consists of three diodes and one capacitor. Based on this passive network, the two capacitors can be connected in series and parallel, so the phase winding of SRM obtains general do-link voltage in excitation mode and the double dc-link voltage in demagnetization mode. The operation modes of the proposed converter are analyzed in detail. Some computer simulation results is done to verify the performance of proposed converter.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.505-512
• /
• 2011

A novel passive boost power converter forsingle-phaseswitched reluctance motor is presented. A simple passive circuit is proposed comprisingthree diodes and one capacitor. The passive circuitis added in the front-end of a conventional asymmetric converter to obtain high negative bias. Based on this passive network, the terminal voltage of the converter side is a general DC-link voltage level in parallel mode up to a double DC-link voltage level in series mode. Thus,it can suppress the negative torque generation from the tail current and improve the output power. The results of the comparative simulation and experiments forthe conventional and proposed converter verify the performance of the proposed converter.

• 조명전기설비학회논문지
• /
• 제25권3호
• /
• pp.40-49
• /
• 2011

This paper presents novel circuit topology of half-bridge soft-switching PWM inverter type DC-DC high power converter for DC bus feeding power plants. The proposed DC-DC power converter is composed of a typical voltage source-fed, half-bridge high frequency PWM inverter with a high frequency planar transformer link PWM control scheme and parallel capacitive lossless snubbers. The operating principle of the new DC-DC converter treated here is described by using switching mode-equivalent circuits, together with its unique features. All the active power switches in the half-bridge arms and input DC bus lines can achieve ZCS turn-on and ZVS turn-off commutation transitions. The total turn-off switching losses of the power switches can be significantly reduced. As a result, high switching frequency IGBTs can actually be selected in the frequency range of 40[kHz] under the principle of soft-switching. The performance evaluations of the experimental setup are illustrated practically.

• ETRI Journal
• /
• 제31권3호
• /
• pp.327-329
• /
• 2009

In a network, broadcasting is the dissemination of a message from a source node holding a message to all the remaining nodes through a call. This letter proposes a one-to-all broadcasting algorithm in the Petersen-torus network PT(n, n) for the single-link-available and multiple-link-available models. A PT(n, n) is a regular network whose degree is 4 and number of nodes is $10n^2$, where the Petersen graph is set as a basic module, and the basic module is connected in the form of a torus. A broadcasting algorithm is developed using a divide-and-conquer technique, and the time complexity of the proposed algorithm approximates n+4, the diameter of PT(n, n), which is the lower bound of the time complexity of broadcasting.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.715-718
• /
• 2001

Test in the development of vehicle consist of driving test and simulation test. The last one has many advantages. It can reduce time and cost during development, can overcome the spacial and environmental limitation, and can provides repeatabilities of similar experiments and various data. In these reason, the simulation test is used more for analysis and development of new vehicle. In this research the result of kinematic analysis on multi-axis simulator is compared with the simulated result using dynamic analysis program, ADAMS, and the maximum stress and strain are analyzed for the safety of link and specifications of optimal design using finite element method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.551-554
• /
• 2000

Alignment system is a system to locate an object to it's accurate position in multi-d.o.f space. According to process of application, it is need to align an object in 3 or 6 d.o.f. space. And alignment system is used in various environments. Especially in PDP application, alignment process is carried out in vaccume environment. In this paper, we developed 3 d.o.f. alignment system for vaccume environment, performed kinematic analysis and improved it's positional accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.879-880
• /
• 2008

At the high speed operation, the boost negative bias can reduce the negative torque and increase the dwell angle, so the output power and efficiency can be improved. In this paper, a novel power converter for single phase SRM with boost negative bias is proposed. A simple passive capacitor circuit is added in the front-end, which consists of three diodes and one capacitor. Based on this passive capacitor network, the two capacitors can be connected in series and parallel in different condition. In proposed converter, the phase winding of SRM obtains general dc-link voltage in excitation mode and the double dc-link voltage in demagnetization mode. The operation modes of the proposed converter are analyzed in detail. Some computer simulation and experimental results are done to verify the performance of proposed converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.109-113
• /
• 1987

This paper briefly introduces a strategy of data links between EMS and SCADA systems for the KEPCO's EMS project. For the data links, front end/communication processors are adopted that provide for protocol conversion and communication processing in parallel with EMS/SCADA processing. The data link configuration for a communication channel is point to point links. The EMS - hardware and software - has capability of handling links utilizing both bisync protocol and X.25 (Level 1 and 2)protocol for the data link protocol.