• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.251-258
• /
• 2013

A procedure for antenna parameter selections is proposed that considers the relationships between synthetic aperture radar performance and the antenna parameters of a parabola-type reflector antenna with a central flat dish. The effects of a central dish designed for weight reduction on the antenna beam pattern are also quantitatively analyzed using commercially available software based on the physical optics algorithm. The results of the theoretical analysis and simulation predict that a larger size of the central dish results in an increase in the sidelobe level, which is the reason for the increase in two important ambiguities, such as range ambiguity ratio (RAR) and azimuth ambiguity ratio (AAR). The dependence of RAR and AAR on Pulse repetition frequency is also analyzed and discussed.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.448-454
• /
• 2015

In this paper, the band structural design that is typically in a line was arranged in a ring shape, so as to configure the high power LED lighting in such a way as to form a concentrated light distribution angle of less than 15 degrees. The parabolic aluminized reflector PAR38 that facilitates design using area and the area of the optical system to the same extent, applied a multiple light-source condenser lens optical system for the control of integration. The LED used here implemented a single linear light source using ans LED module with ans LED, flip-chip chip-scale package. The optical system was designed based on the energy star standard.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.19-25
• /
• 2004

A numerical study is performed to investigate the effect of sun tracking on the thermal performance of the evacuated compound parabolic concentrator (CPC) collectors. The evacuated CPC collectors consist of a two-layered glass tube, a copper tube and a reflector. The collector has a copper tube as an absorber and a reflector inside a glass tube. The water is used as a working fluid. The length and the diameter of the glass tube are 1,700mm and 70mm, respectively. The length and the diameter of the copper tube are 1,700mm and 25.4mm, respectively. Ray tracing analysis is carried out in order to compare absorbed heat fluxes on the absorber surface of the stationary and tracking collectors. The collected energy is calculated and compared with that on a fixed surface tilted at $35^{\circ}$ on the ground and facing south. The results indicate that the collected solar energy of the sun tracking system is significantly larger than that of a stationary collector. The sun tracking evacuated CPC collectors show a better performance with an increase in the thermal efficiency of up to 14% compared with an identical stationary collector.

• 항공우주기술
• /
• 제12권2호
• /
• pp.140-146
• /
• 2013

본 연구는 파라볼릭 반사기의 체적을 줄일 수 있는 프린트 리플렉터어레이 안테나 설계에 대한 연구이다. 이를 위해 시뮬레이션과 제작된 도파관 시뮬레이터 측정을 통해 리플렉트어레이 안테나 단일소자의 위상변위 특성을 확인하였다. 그 결과, 10GHz에서 시뮬레이션시 최대 $298^{\circ}$의 위상 변위를 나타내었으며, 제작 측정시 $309^{\circ}$의 평균 위상변위 특성이 나타남을 확인하였다. 또한, 프린트 리플렉트어레이 안테나 이득은 28.3dBi, 3dB 빔폭은 E-plane $5.1^{\circ}$, H-plane $5.2^{\circ}$, 부엽은 E-plane -11.4dB, H-plane -17.6dB를 나타내었다.

• 설비공학논문집
• /
• 제25권5호
• /
• pp.240-245
• /
• 2013

We developed a parabolic reflector based daylighting system which can be used as an alternative indoor daytime lighting device such as for fluorescent lamps. The system comprises three main components : a daylight concentrator made of 4 pairs of parabolic reflectors and mirrors, a silica optical fiber bundle based light transmitter, and 4 light diffusers for the final indoor delivery of the collected daylight. We analyzed the performance of the system and revealed the system efficiency and daylighting factor. All test methods follow the rule, NR PV601 : 2007-daylighting system, governed by Korea Energy Management Corporation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.161-164
• /
• 2006

This paper introduces a preliminary work for the design of a mini-dish cluster system for power general ion. Each mini-dish (typically has a 20 to 30cm in diameter) is designed with a simple parabolic profile, concentrating sun light (after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning) onto a centrally located small plane(or concave) mirror which is placed on the bottom side of the transparent glass cover. The mirror with a mini-dish concentrator is designed to focus beam radiation onto a focal point before it enters a bundle of optical fibers connected to a remote receiver for power generation different options are considered In designing a mini-dish concentrator to maximize its effectiveness for the collection and use of solar energy.

• 신재생에너지
• /
• 제2권4호
• /
• pp.39-45
• /
• 2006

This paper introduces a preliminary work for the design of a mini-dish cluster system for power generation. Each mini-dish [typically has a 20 to 30 cm in diameter] is designed with a simple parabolic profile concentrating sun light [after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning] onto a centrally located small plane[or concave] mirror which is placed on the bottom side of a transparent glass cover. The mirror with a mini-dish concentrator is designed to focus beam radiation onto a focal point before it enters a bundle of optical fibers connected to a remote receiver for power generation. Different options are considered in designing a mini-dish concentrator to maximize its effectiveness for the collection and use of solar energy.

• 태양에너지
• /
• 제20권3호
• /
• pp.61-73
• /
• 2000

Heat losses from receivers for a dish-type solar energy collecting system are numerically investigated. The analytical method for predicting conductive heat loss from a cavity receiver is used. The Stine and McDonald Model is used to estimate convective heat loss. Two kinds of techniques for the radiation analysis are used. The Net Radiation Method that is based on the radiation heat balance on the surface is used to calculate the radiation heat transfer rate from the inside surface of the cavity receiver to the environment. The Monte-Carlo Method that is the statistical approach is adopted to predict the radiation heat transfer rate from the reflector to the receiver. Based on the heat loss analysis, the performance of two different receivers for multifaceted parabolic solar collectors with several flat facets can be estimated, and the optimal facet size is obtained.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.93-102
• /
• 2021

In this research, we present a natural lighting system with transmission distance of 30m and lighting efficiency of 35% (30m standard) for operating hours of 7h/day (based on clear sky). The system is composed of parabolic reflective mirror and modified light pipe that can secure more than 88% of light concentration efficiency. The light loss rate of newly designed light pipe transmission system is demonstrated to 0.8 %/m in the straight-line part and 2%/m in the curved part. Modified light pipe daylighting system shows better performance over fiber optic daylighting system in terms of transmission distance (1.5 times longer) and illuminance (3.05 times higher).

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.152-155
• /
• 2013

본 논문은 위성방송 수신용 소형 파라볼라 안테나의 높이를 보다 낮추기 위하여 반사면의 상하 부분을 부분적으로 절단하였을 때 나타나는 spill-over 의 증가로 인한 성능지수의 저하를 분석하였다. 또한 안테나를 고도각 0도부터 60도까지 트래킹하는 경우에 측엽과 후엽이 받는 대지면 열잡음의 증가로 인한 잡음온도의 영향을 고려하고, LNA 의 잡음지수로 인한 총 잡음온도의 증가 영향을 고려하여 성능지수 값을 시뮬레이션하여 그 결과를 분석하였다. 분석 결과, 원형 파라볼라의 반사면 상하부분을 35% 절단하였을 때, 잡음온도는 약 15K 정도 증가하였으며, G/T 비는 2.5dB 정도 저하하였다.