• Journal of Life Science
• /
• v.29 no.11
• /
• pp.1294-1303
• /
• 2019

Perchlorate is an anionic pollutant that is very soluble and stable in water. It has been detected not only in soil/ground water but also in surface water, drinking water, food, fish, and crops. Perchlorate inhibits iodine uptake by the thyroid gland and reduces production of thyroid hormones that are primarily responsible for regulation of metabolism. Although various technologies have been developed to remove perchlorate from the environment, biodegradation is the method of choice since it is economical and environmentally friendly. However there is limited information on perchlorate biodegradation in salt environment such as salt water. Therefore this paper reviews biodegradation of perchlorate in salt water and related microorganisms. Most biodegradation research has employed heterotrophic perchlorate removal using organic compounds such as acetate as electron donors. Biodegradation research has focused on perchlorate removal from spent brine generated by ion exchange technology that is primarily employed to clean up perchlorate-contaminated ground water. Continuous removal of perchlorate at up to 10% NaCl was shown when bioreactors were inoculated with enriched salt-tolerant perchlorate-reducing bacteria. However the reactors did not show long-term stable removal of perchlorate. Microorganisms belonging to ${\beta}$- and ${\gamma}$-Proteobacteria were dominant in bioreactors used to remove perchlorate from salt water. This review will help our understanding of perchlorate removal from salt water to develop a decent biotechnology for the process.

• The Journal of Information Technology
• /
• v.7 no.2
• /
• pp.1-5
• /
• 2004

The symmetric 9-phenyl-5,5'-diphenyl-3,3'-bis-(3-sulfopropyl)-benzoxazolo carbocyanine triethyl ammonium salt is of industrial importance as green-sensitizing dye in the spectral sensitization of emulsion microcrystals in negative film and positive paper-making. The stability on the solvents of benzoxazolo carbocyanine dye was measured by UV-Vis spectrophotometer, and then dye was stabilized in various solvents. The maximum absorption peak range in various solvents was 507nm~515nm. It was identified that the solvents can be used to photographic emulsion.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.330-335
• /
• 2012

Roll formed steel bolts are electrodeposited with Zn-Ni to protect themselves from corrosion. However, white storage stain or white rust(corrosion) is found on Zn-Ni electrodeposited surface of steel bolts when they are exposed to moisture. In this paper a new process is introduced to protect Zn-Ni electrodeposited steel bolt from white storage stain or white rust for a long time under the salt spray test and high humidity test conditions. The better corrosion resistance could be gotten by the additional process of Ni-P electroless deposition and heat treatment to conventional manufacturing method of Zn-Ni coated steel bolt. The corrosion resistance of Zn-Al powder slurry coated steel bolt showed better than that of Zn-Ni electrodeposited one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.123-127
• /
• 2002

This paper presented the results of evaluation of artificially contaminated suspension insulators for transmission lines. The suspension insulators were contaminated with kaolin and clay which were included various amount of natural salt. The degree of contamination were evaluated by measuring equivalent salt deposit density(ESDD). Then, the leakage currents were measured as a function of applied voltage, degree of contamination, humidity.

• Journal of Nutrition and Health
• /
• v.42 no.4
• /
• pp.350-357
• /
• 2009

The purpose of this paper was to evaluate the effectiveness of a salt reduction education program. Subjects participating in this study were 251 employees (166 in the "educated" group, 85 in the "non-educated" group) at 8 hospital and industry food service operations in Daegu. After the salt reduction education program was carried out, a salty taste assessment of both groups was conducted. The educated group had statistically significant differences and the noneducated group did not have statistically significant differences. In terms of nutrition knowledge, while the nutrition knowledge of the educated group was increased (p < 0.001), that of the non-educated group rose at a rate of 0.92. In terms of dietary attitude, the educated group exhibited increased preference toward less salty foods when compared to the noneducated group (p < 0.001). Regarding dietary behavior, the score of the educated group was improved (p < 0.001), thereby indicating a preference for less salty taste. This means that nutrition education had influence on dietary behavior. However, after education, sodium excretion for the educated group was not significantly decreased, compared to before education. The results show that there was a positive correlation between salty taste assessment and dietary attitude and behavior for a high-salt diet. There was a positive relationship between attitude for a high-salt diet and sodium intake; when people prefere a more salty taste, they eat more sodium. Therefore, in order to change dietary preference away from salty taste and to decrease sodium intake, a nationwide, systematic and continuous salt reduction education program is needed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.530-532
• /
• 2018

Digital imaging equipment has been used for a variety of purposes in a wide range of society and has become an important element of the fourth industrial revolution. However, there are various causes of noise in the process of transmitting / receiving data and processing of the equipment, thus affecting the accuracy and reliability of the equipment. In this paper, we propose an image restoration algorithm based on pixel range set by standard deviation to effectively remove Salt and Pepper noise. In the conventional methods, the performance degrades in the edge and high frequency components of the image. However, the proposed method has better noise reduction performance than the conventional method by performing the noise elimination considering the image boundary. It has confirmed that the performance of such PSNR and magnified image, the experimental results showed that the proposed algorithm superior compared to existing methods.

• Geomechanics and Engineering
• /
• v.18 no.2
• /
• pp.189-203
• /
• 2019

Brine leakage is a common phenomenon during construction facilitated by artificial freezing technique, threatening the stability of frozen wall due to the continual thawing of already frozen domain. This paper takes the frequently encountered soft clay in Wujiang District as the study object, and remolded specimens were prepared by mixing calcium chloride solutions at five levels of concentration. Both the deformation and pore water pressure of frozen specimens during thawing were investigated by two-stage loading tests. Three sections were noted from the changes in the strain rate of specimens during thawing at the first-stage load, i.e., instantaneous, attenuated, and quasi-stable sections. During the second-stage loading, the deformation of post-thawed soils is closely correlated with the dissipation of pore water pressure. Two characteristic indexes were obtained including thaw-settlement coefficient and critical water content. The critical water content increases positively with salt content. The higher water content of soil leads to a larger thaw-settlement coefficient, especially at higher salt contents, based on which an empirical equation was proposed and verified. The normalized pore water pressure during thawing was found to dissipate slower at higher salt contents, with a longer duration to stabilize. Three physical indexes were experimentally determined such as freezing point, heat conductivity and water permeability. The freezing point decreases at higher salt contents, especially as more water is involved, like the changes in heat conductivity. The water permeability maintains within the same order at the considered range of salt contents, like the development of the coefficient of consolidation. The variation of the pore volume distribution also accounts for this.

• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.48-54
• /
• 2020

This paper presents a screening protocol for the selection of solvents available for the solvent extraction desalination process. The desalination solvents hypothetically and theoretically require the capability of (1) Forming hydrogen bonds with water, (2) Absorbing some water molecules into its non-polar solvent layer, (3) Changing solubility for water-solvent separation, and (4) Rejecting salt ions during absorption. Similar to carboxylic acids, amine solvents are solvent chemicals applicable for desalination. The key parameter for selecting the potential solvent was the octanol-water partitioning coefficient (Kow) of which preferable value for desalination was in the range of 1-3. Six of the 30 amine solvents can absorb water and have a variable, i.e., temperature swing solubility with water molecule for water-solvent separation. Also, the hydrogen bonding interaction between solvent and water must be stronger than the ion-dipole interaction between water and salt, which means that the salt ions must be broken from the water and only water molecules absorbed for the desalination. In the final step, three solvents were selected as desalination solvents to remove salt ions and recover water. The water recovery of these three solvents were 15.4 %, 2.8 %, 10.5 %, and salt rejection were 76 %, 98 %, 95 %, respectively. This study suggests a new screening protocol comprising the theoretical and experimental approaches for the selection of solvents for the desalination method which is a new and challenges the desalination process in the future.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1991.04a
• /
• pp.9-9
• /
• 1991

This paper will begin by describing osmosis and how reverse osmosis works. It will show how osmotic pressure affects reverse osmosis operations. It uill explain salt rejection, membrane flux, and recovery rates and the affect that salt built up has on membrane performance. It wil 1 explain the limitations of RO performance and why pretreatment is important. It will describe the two basic types of membrane, asymmetric and thin-film composite and explain the difference between these types plus compare cellulose acetate types to aromatic polyamide type membranes. It will discuss operating efficiences as it compares to feedwater pressure, concentration, temperature and pH. Finally, it will discuss the differences between tubular, plate and frame, hollow fiber and spiral wound element design. It will be a paper that talks about the basics of RO systems and should give a person who is unfamiliar with RO a basic introduction to this type of separation technology.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.23-30
• /
• 2008

The neutron kinetic analysis methods for the molten-salt reactors are quite different from those for conventional solid-fuel reactors, which do not take into account the flowing-fuel-induced neutronics effects. Therefore, for dynamics and safety analyses of the molten-salt reactor systems, the conventional kinetics codes would not be appropriate to accurately predict its transient behaviors. A point-kinetics with flowing- fuel model has been used to assess the fluid-fuel reactor system safety, but recognized as not to be sufficient to simulate spatial distributions of delayed-neutron precursors and neutron populations during transients for given detail reactor models. In order to meet this requirement, AMBIKIND, a 2-group, 2-dimensional neutron kinetics code suitable for the molten-salt reactor systems was developed. This paper explains the code's theoretical and numerical descriptions and, as a part of its verification, includes some simulation results of MSRE stability experiments. Even though the present reactor model does not include the recirculation effect of the fuel-salt through the reactor system, the AMBIKIN2D code should be able to predict the power and phase shift at various power levels and reactivity insertions with better accuracy.