• Computers and Concrete
• /
• v.3 no.5
• /
• pp.301-312
• /
• 2006

Experimental research revealed that the spatial dispersion of aggregate grains exerts pronounced influences on the mechanical and durability properties of concrete. Therefore, insight into this phenomenon is of paramount importance. Experimental approaches do not provide direct access to three-dimensional spacing information in concrete, however. Contrarily, simulation approaches are mostly deficient in generating packing systems of aggregate grains with sufficient density. This paper therefore employs a dynamic simulation system (with the acronym SPACE), allowing the generation of dense random packing of grains, representative for concrete aggregates. This paper studies by means of SPACE packing structures of aggregates with a Fuller type of size distribution, generally accepted as a suitable approximation for actual aggregate systems. Mean free spacing $\bar{\lambda}$, mean nearest neighbour distance (NND) between grain centres $\bar{\Delta}_3$, and the probability density function of ${\Delta}_3$ are used to characterize the spatial dispersion of aggregate grains in model concretes. Influences on these spacing parameters are studied of volume fraction and the size range of aggregate grains. The values of these descriptors are estimated by means of stereological tools, whereupon the calculation results are compared with measurements. The simulation results indicate that the size range of aggregate grains has a more pronounced influence on the spacing parameters than exerted by the volume fraction of aggregate. At relatively high volume density of aggregates, as met in the present cases, theoretical and experimental values are found quite similar. The mean free spacing is known to be independent of the actual dispersion characteristics (Underwood 1968); it is a structural parameter governed by material composition. Moreover, scatter of the mean free spacing among the serial sections of the model concrete in the simulation study is relatively small, demonstrating the sample size to be representative for composition homogeneity of aggregate grains. The distribution of ${\Delta}_3$ observed in this study is markedly skew, indicating a concentration of relatively small values of ${\Delta}_3$. The estimate of the size of the representative volume element (RVE) for configuration homogeneity based on NND exceeds by one order of magnitude the estimate for structure-insensitive properties. This is in accordance with predictions of Brown (1965) for composition and configuration homogeneity (corresponding to structure-insensitive and structure-sensitive properties) of conglomerates.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2294-2304
• /
• 1999

Our research purpose in this paper is to improve the performance of query processing in GIS(Geographic Information System) by enhancing the I/O performance exploiting parallel I/O and efficient disk access. By packing adjacent spatial data, which are very likely to be referenced concurrently, into one block or continuous disk blocks, the number of disk accesses and the disk access overhead for query processing can be decreased, and this eventually leads to the I/O time decrease. So, in this paper, we proposes EPR(Enhanced Parallel R-tree) indexing method which integrates the parallel I/O method of the previous Parallel R-tree method and a packing-based clustering method. The major characteristics of EPR method are as follows. First, EPR method arranges spatial data in the increasing order of proximity by using Hilbert space filling curve, and builds a packed R-tree by bottom-up manner. Second, with packing-based clustering in which arranged spatial data are clustered into continuous disk blocks, EPR method generates spatial data clusters. Third, EPR method distributes EPR index nodes and spatial data clusters on multiple disks through round-robin striping. Experimental results show that EPR method achieves up to 30% or more gains over PR method in query processing speed. In particular, the larger the size of disk blocks is and the smaller the size of spatial data objects is, the better the performance of query processing by EPR method is.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.189-196
• /
• 1991

The objective of this study was to investigate the effect of temperature on microbial characteristics and treatment efficiency in aerated submerged biofilm process. From the results of the research, conclusions were derived as following: 1. Biofilm density, attached biomass and biofilm thickness were $30-42mg/cm^3$, $1.2-2.7mg/cm^2$ and $380-690{\mu}m$, respectively. These were greatly affected by the variation of temperature ($5-20^{\circ}C$) and packing ratio(45-90%). 2. The ratio of suspended biomass to the total biomass in the reactor was in the range of 10 to 50 % in accordance with the variation of temperature and packing ratio. Therefore, the portion of suspended biomass cannot be neglected. 3. BOD removal efficiency increased as either temperature or biomass(suspended and attached) concentration increased. 4. The aerated submerged biofilm process appeared to be less affected by temperature variation and the estimated temperature correction coefficient of the Van't Hoff-Arrhenenius equation was 1.042.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.206-211
• /
• 1987

In an attempt to improve the quality stability of dried layer (Porphyra yezoensis Ueda), during longterm storage and distribution, a 6 months storage trial at different temperature and packaging condition was conducted. Dried layer samples were prepared by conventional procedure with different washing condition and $5^{\circ}C$ and $30^{\circ}C$ were employed as storage temperature. The moisture sorption isotherm was drawn at $5^{\circ}C$ and $25^{\circ}C$ and BET equation was prepared from the moisture sorption isotherm. The monolayer moisture contents of dried layer were 7.4% at $5^{\circ}C$ and 6.4% at $25^{\circ}C$, respectively. It was also found that the changes in comprehensive quality of dried layer during storage was much less at low temperature and the degree of washing before drying process as far as its moisture contents are lower than monolayer moisture contents. With regard to the packing methods, vaccum packing was superior to air containing packaging for the maintainance of quality during storage.

• Solar Energy
• /
• v.17 no.2
• /
• pp.75-89
• /
• 1997

In this paper, the operating thermal characterictics of liquid-ice was expeimentally investigated in an adiabatic and a non-adiabatic direct contact liquid-ice heat exchanger. Experiments were carried out varing inlet temperature, Ice Packing Factor, and the flow rate of heat transfer fluid. The higher inlet temperature and the more much inlet flow rate, thermal stratification in liquid-ice heat exchanger was established faster. In the case of adiabatic ice storage tank, temperature distribution was a little higher at all conditions than that of non-adiabatic one. The ratio of latent energy to total discharge energy($E_{\lambda}/E_[tot}$) was about 80%, and the discharge of latent heat energy was appeared rapidly as inlet temperature and flow rate were higher.

• Journal of the Korean Ceramic Society
• /
• v.30 no.4
• /
• pp.289-298
• /
• 1993

Properties in terms of the variation of the glass compositions, which were density (p), molar volume(Vm), atom/ion packing density (Dp), refractive index (nD), transformation temperature (Tg), dilatometric softening point (Td), thermal expansion coefficient (α), Young's modulus (E), and knoop hardness (KHN) were investigated in CaO-SiO2 glasses and CaO-P2O5-SiO2 glasses containing less than 10mole% of P2O5. Those properties were measured by density measurement kit, Abbe refractometer, dilatometer, ultrasonic pulse echo equipment, and micro hardness tester. When CaO content was increased in CaO-SiO2 glasses, p, Dp, nD, Tg, Td, α, E and KHN were increased, while Vm was decreased. When P2O5 was added to the CaO-SiO2 glasses with constant CaO/SiO2 ratio as 1.07, p, Dp, nD, Tg, Td, α, E and KHN were decreased, while Vm was increased. When the amount of P2O5 in glasses was kept constant, the changes of the properties with variation of CaO content in the CaO-P2O5-SiO2 glasses were very similar to those of CaO-SiO2 glasses. These phenomena could be explained by the structural role of P2O5 in the CaO-P2O5-SiO2 glasses, which was polymerization of siicate structures and resulted in [PO4] monomer structure in glasses. Due to this structural characteristics, the bond strength and packing density were changed with compositions. Proportional relationships between 1) np and Dp, 2) Tg, Td, α and CaO content, 3) E and Vm-1, and 4) KHN and P2O5 content were evaluated in this investigation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.10-14
• /
• 2009

We propose a trapezoidal gate AlGaN/GaN high electron mobility transistor(HEMT) to improve the breakdown voltage characteristics and its feasibility is investigated by two-dimensional device simulations. The use of a trapezoidal gate structure appears to be quite effective in dispersing the electric fields concentrated near the gate edge on the drain side from the simulation result. We find that a peak value of the electric field along the 2-DEG channel is reduced by 30%, from 4.8 to 3.5 MV/cm and thereby, the breakdown voltage(Vbr) of the proposed AlGaN/GaN HEMT is increased by about 40%, from 49 to 69 V, compared to those of the standard AlGaN/GaN HEMT.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.125-131
• /
• 2003

This study was carried out to develop INSUB(Indirected Aerated Submerged Biofilter) which can remove organics, nitrogen and phosphorus with an advanced treatment system. The results were as followed in laboratory model experiment. As for treatment of sewage, when economical efficiency was considered in practice, the highest removal efficiency was at 18hr of HRT, 1.017m/hr of superficial velocity and 40% of media packing ratio. Each removal efficiency for $COD_{cr}$, $COD_{Mn}$, $BOD_5$, T-N, and T-P was 90.6, 85.3, 95.0, 52.3 and 56.8%. To remove the nitrogen and phosphorus With high efficiency, first of all, denitrification have to be completed, then uptake of phosphorus have to completed. Therefor, mixture of anoxic and aerobic reactor was necessary for the high removal efficiency of nitrogen and phosphorus in INSUB.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.292-298
• /
• 2020

Objectives: The aim of this research is to establish Similar Exposure Groups (SEGs) for chemical and biological risk factors that occur in farm work involving 24 tasks among 15 crops. Methods: To categorize SEGs, work type, work environment, and similar tasks for each crop were considered. After confirming the chemical risk factors (pesticides, inorganic dust-total dust and PM₁₀, ammonia, and hydrogen sulfide) and biological factors (organic dust-total dust and PM₁₀, and endotoxins) that occur in the crops and tasks, similar crops and tasks were selected as SEGs. Results: Among chemical risk factors, pesticides was selected for the SEGs, which was categorized by open field, greenhouse, fruit, and specialty crops. For inorganic dust, open field (plowing harrowing, seedling, planting, harvest, and sorting and packing) and specialty crops (plowing harrowing, seedling, planting, and harvest) were selected as SEGs. For ammonia and hydrogen sulfide, livestock (preparation of farm, management of nursery bed, feeding, shipment and manure treatment) were selected as SEGs. For biological risk factors such as organic dust (total dust, PM₁₀) and endotoxins, open field (manure application), greenhouse (plowing harrowing, planting, manure application, and harvest), fruit (manure application), specialty crops (manure application, making furrows, mixing mushroom media, harvest, and sorting and packing), and livestock (preparation of farm, maintaining poultry litter, feeding, shipment and manure treatment) were selected as SEGs. Conclusions: To establish similar exposure groups in agriculture, it is important that the characteristics of each hazard factor are categorized by identifying risk factors occurring by tasks.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.112-117
• /
• 2003

MgO films is widely used in plasma display panel (PDP) technology. In this work, structural and optical properties of the MgO films deposited by e-beam evaporation, reactive magnetron sputtering, which are commercially used, and arc deposition were compared. MgO thin films were deposited on glass substrates by vacuum arc deposition equipment using a magnesium metal target at various oxygen gas flows. In order to investigate the packing density by ellipsometer, to measure reasonable erosion-rates of the MgO protective layers, we introduced an acceleration test method, namely, Ar+ ion beam induced erosion test. Also, XPS and UV test were adopted to examine the effect of the moisture on the optical transmittance of the MgO protective layers, which showed that these of MgO films by arc deposition method sustained more 90% and were insensitive to effect of the moisture. XRD and AFM have been also used to study behaviors of the structure and surface morphology.