• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.858-870
• /
• 2007

TCP is popular protocol for reliable data delivery in the Internet. In recent years, wireless environments with transmission errors are becoming more common. Therefore, there is significant interest in using TCP over wireless links. Previous works have shown that, unless the protocol is modified, TCP may perform poorly on paths that include a wireless link subject to transmission errors. The reason for this is the implicit assumption in TCP that all packet losses are due to congestion which causes unnecessary reduction of transmission rate when the cause of packet losses are wireless transmission errors. In this paper, we propose a new LDA that monitors the network congestion level using ROTT. And we evaluate the performance of our scheme and compare with TCP Veno, Spike scheme with NS2(Network Simulator 2). In the result of our experiment, our scheme reduces the packet loss misclassification to maximum 55% of other schemes. And the results of another simulation show that our scheme raise its transmission rate with the fairness preserved.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.233-248
• /
• 2008

Stream Control Transmission Protocol(SCTP) is a new transport protocol that is known to provide improved performance than Transmission Control Protocol(TCP) in multi-homing environment that is having two and more IP addresses. But currently single-homed computer is used primarily that is having one IP address. To identify whether mean transfer time for SCTP is faster that for TCP in single-homed environment considering packet loss, we make up real testbed regulating the bandwidth, delay time and packet loss rate on router and observe the transfer time. We write server and client applications to measure SCTP and TCP mean transfer time by C language. Analysis of these experimental results from the testbed implementation shows that mean transfer time of SCTP is not better than performance of TCP in single homed environment exceptional case. Main reasons of performance are that SCTP compared to TCP stops transmitting data by timeout and data transmission is often delayed when SACK congestion happens. The result of study shows that elaborate performance tuning is required in developing a new SCTP module or using a implemented SCTP module.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1254-1260
• /
• 2019

Recently, 5G cellular systems have been attracted great attention as a key enabler for Industry 4.0. In this paper, we propose a novel random access based on pilot-assisted opportunistic transmission to support internet-of-things (IoT) scenario in cellular networks. A key feature of our proposed scheme is to enable each of IoT devices to attempt opportunistic transmission of its data packet in Step 3 with randomly selected uplink pilot signal. Both the opportunistic transmission and the pilot randomization in Step 3 are effective to significantly mitigate the occurrence of packet collisions. We mathematically analyze our proposed scheme in terms of packet collision probability and uplink resource efficiency. Through simulations, we verify the validity of our analysis and evaluate the performance of our proposed scheme. Numerical results show that our proposed scheme outperforms other competitive schemes.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.69-77
• /
• 2015

MANET is composed of only the mobile nodes have a limited transmission range. The dynamic topology by the frequent movement of nodes makes routing difficult and is also cause exposed to security vulnerabilities. In this paper, we propose the security routing technique consisted of mechanism of two steps in order to respond effectively to attack by the modification of the routing information and transmit secure data. The hierarchical structure is used and the authentication node that issues the key of the nodes within each cluster is elected in this proposed method. The authentication node manages key issues and issued information for encrypting the routing information from the source node. The reliability value for each node is managed to routing trust table in order to secure data transmission. In the first step, the route discovery is performed using this after the routing information is encrypted using the key issued by the authentication node. In the second step, the average reliability value of the node in the found path is calculated. And the safety of the data transmission is improved after the average reliability value selects the highest path. The improved performance of the proposed method in this paper was confirmed through comparative experiments with CBSR and SEER. It was confirmed a better performance in the transmission delay, the amount of the control packet, and the packet transmission success ratio.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.235-240
• /
• 2006

Stream Control Transmission Protocol (SCTP) provides the multi-homing feature, which allows each SCTP endpoint to use two or more IP addresses for data transmission. In this paper, the SCTP multi-homing feature is experimented and analyzed in terms of throughput over Linux platforms based on the NISTNET network emulator. We perform the experimental analysis of SCTP throughputs by SCTP multi-homing for the various network conditions: different packet loss rates, network bandwidths, and transmission delays. From the experimental results, it is shown that the SCTP multi-homing gives much better throughout gun over the SCTP single-homing case in the networks with a high packet loss rate. In the meantime, the other factors including network bandwidth and transmission delay do not seem to give a significant impact on the performance of the SCTP multi-homing.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.878-883
• /
• 2006

New emerging wireless broadband internet can make many broadband multimedia services. The networked intelligent mobile robot service is one of the new services. In the networked robot control, both the on-line real-time control and the reliability of control data transmission are very important. Considering the real-time control and data reliability, an efficient transmission method based on UDP protocol is proposed. The proposed method allocates the priority to the robot control data and the transmission of the robot data at the base station is carried out in duplicate manner. NS-2 simulation results show that the proposed scheme has a very low packet delay and low packet errors.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.215-217
• /
• 2004

In wireless sensor networks, fair allocation of bandwidth among different nodes is one of the critical problems that effects the serviceability of the entire system. Fair bandwidth allocation mechanisms, like fair queuing, usually need to maintain state, manage buffers, and perform packet scheduling on a per flow basis, and this complexity may prevent them from being cost-effectively implemented and widely deployed. It is a very important and difficult technical issue to provide packet scheduling architecture for fairness in wireless sensor networks. In this paper, we propose an packet scheduling architecture for sensor node, called FISN (Fairness Improvement Sensor Network), that significantly reduces this implementation complexity yet still achieves approximately fair bandwidth allocations. Sensor node for sensing estimate the incoming rate of each sensor device and insert a label into each transmission packet header based on this estimate. Sensor node for forwarding maintain no per flow state; they use FIFO packet scheduling augmented by a probabilistic dropping algorithm that uses the packet labels and an estimate of the aggregate traffic at the gathering node. We present the detailed design, implementation, and evaluation of FISN using simulation. We discuss the fairness improvement and practical engineering challenges of implementing FISN in an experimental sensor network test bed based on ns-2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.171-181
• /
• 1988

In this study, a packet voice/data terminal(PVDT) that services both voice and data in the packet-switched network is implemented. The software structure of the PVDT is designed according to the OSI 7 layer architecture. The discrimination of voice and data is made in the link layer. Voice packets have priority over data packets in order to minimize the transmission delay, and are serviced by a simple protocol so that the overhead arising form the retransmission of packets may be minimized. The hardware structure of the PVDT is divided into five modules; a master control module, a speech proessing module, a speech activity detection module, a telephone interface module, and an input/output interface module. In addition to the hardware implementation, the optimal reconstruction delay of voice packets to reduce the influence of delay variance is analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1841-1854
• /
• 1993

In this paper, the packet voice protocol for the transmission of voice signal onto ethernet is implemented in a personal computer (PC). The packet voice protocol used is a modified one from CCITT G.764 packetized voice protocol. The hardware system to facilitate the voice communication onto ethernet is divided into telephone interface, speech processing, PC interface and controllers. The software structure of the protocol is designed according to the OSI seven layer architecture and is divided into three routines : ethernet device driver, telephone interface, and processing routine of the packet voice protocol. Experiments through ethernet with telephone interface show that this packet voice communication achieves satisfactory quality when the network traffic is light.