• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.659-664
• /
• 2011

Staphylococcus aureus (SA) bacteremia is associated with high mortality, and often results in metastatic infections. The methicillin-resistant SA (MRSA) is an urgent health care issue, as nosocomial infections with these bacteria represent limited treatment alternatives. Samples of whole blood containing challenge inoculums of SA and MRSA strains were passed through columns packed with surfaceheparinized polyethylene beads. The bound bacteria were eluted and quantitatively determined by culturing and by real-time PCR. Significant amounts of both SA and MRSA adhered to the heparinized beads (more than 65% of inoculated bacteria). After rinsing with buffer at high ionic strength, viable bacteria or bacterial DNA were eluted from the columns, indicating that the binding was specific. The conclusions that can be made from these experiments are that, as earlier reported in the literature, the high affinity of SA to heparin is retained in whole blood, and MRSA in whole blood binds to heparin with similar or higher affinity than SA. It should be possible to lower the amount of SA and/or MRSA from the blood of infected patients to levels that could be taken care of by the immune system. In previous studies, we have shown that passing blood from septic patients over beads coated with end-point-attached, biologically active heparin is a useful technique for regulating the levels of heparinbinding cytokine. These findings in combination with the present findings indicate the possibility of creating an apheresis technology for treatment of sepsis caused by SA and/or MRSA.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

• Korean Journal of Veterinary Research
• /
• v.39 no.5
• /
• pp.921-929
• /
• 1999

There have been a number of studies of gonadotropes secreting LH and FSH in the adenohypophysis, but the pattern of hormone storage and secretion of these cells still remains a controversial matter. In this study, we examined whether gonadotropes contained both of LH and FSH, and if so, how these hormones were distributed within the secretory granules. Hypophyseal sections of Korean native goat were simultaneously immunostained for LH and FSH antisera by protein A-gold technique. It was found that most gonadotropes contained both FSH and LH, but hormone storages in the secretory granules were some different among cells. Three types of gonadotropes were identified by the shape and size of the secretory granules and their hormone storage patterns. One type(I) of gonadotropes contained oval secretory granules, which immunoreactivity for FSH and LH were very weak. The size of secretory granules ranged from 160 to 310nm in diameter. Most granules contained both FSH and LH, but some contained only one of them. In another type(II) of gonadotropes, the immunreactivity and hormone storage patterns of the secretory granules were similar to those of type I cells. However, the secretory granules were round in shape and larger in size than those of type I. The other gonadotropes(type III) were distinctly distinguished by plenty of hormones in their secretory granules which were densely packed with numerous immunolabelled gold particles. These data are some inconsistent with other results that have been obtained in other ruminants like as cattle and sheep.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.3
• /
• pp.262-268
• /
• 2009

We investigated the properties of inorganic diatomic films like silicon oxide ($SiO_2$) and zinc oxide (ZnO) and their composite films are packed as a passivation layer around Ca cells on glass substrates by using an electron-beam evaporation technique and rf-magnetron sputtering method. When these Ca cells are exposed to an ambient atmosphere, the water vapor penetrating through the passivation layers is adsorbed in the Ca cells, resulting in a gradual progress of transparency in the Ca cells, which can be represented by changes of the optical transmittance in the visible range. Compared with the saturation times for the Ca cells to become completely transparent in the atmosphere, the protection effects against permeation of water vapor are estimated for various passivation films. The thin composite films consist of$SiO_2$ and ZnO are found to show a superior protection effect from water vapor permeation compared with diatomic inorganic films like $SiO_2$ and ZnO. Also, this inorganic thin composite films are also found that their protection effect against permeation of water vapor can be significantly enhanced by choosing their suitable composition ratio and deposition method, in addition, the main factors affecting the permeation of water vapor through the oxide films are found to be the polarizability and the packing density.

• The Korean Journal of Mycology
• /
• v.13 no.2
• /
• pp.83-87
• /
• 1985

The temperature dependency and the stability of enzyme systems for $11{\alpha}-hydroxyla­tion$ of progesterone were investigated using Aspergillus phoenicis. Though A. phoenicis conserves high enzyme activities for lactose hydrolysis even at high temperatures, the bioconversion reaction of progesterone by this strain was found to be very temperature sensitive. The compositions of reaction mediums of inside and outside of cells were analyzed using sonication technique. At early stage of reaction, the concentration of $11{\alpha}-hydroxyprogesterone$ of cell inside was higher than that of outside. But as the reaction proceeded further, the $11{\alpha}-hydroxyprogesterone$ existing inside of cells being converted into another products, its concentration was lower within the cells that in the bulk medium. Even in the reaction mediums containing organic solvents, A. phoenicis was founded to be able to metabolite, so that $11{\alpha}-hydroxyprogesterone$ can be produced continuously from fixed bed reactions packed with immobilized A phoenicis in vivo.

• Korean Journal of Head & Neck Oncology
• /
• v.25 no.1
• /
• pp.39-42
• /
• 2009

Wide excision for curative treatment of malignant tumor on periauricular area often leads to loss of the external ear. But the auricle has rich vascular supply, Conservation of auricular contour is possible through salvage and engineering of remained auricular tissue. We experienced two cases of auricular salvage after wide excision of malignant tumor. In the first case, we performed two-staged technique. In first step, we covered soft tissue defect on periauricualr area with the anterolateral thigh free flap and remained auricle was floating over the flap after split-thickness skin graft was applied on it's posterior raw surface because it's survival was not confirmed. Second step was reposition of remained auricule on the anterolateral thigh flap. In the second case, we packed in periauricular dead space and external auditory canal with temoporalis muscle and temporoparietal fascial flap and then covered the flap with split thickness skin graft. In these two cases, there were no recurrence of tumors and we obtained cosmetically & functionally satisfactory results.

• Journal of the Korean Society of Tobacco Science
• /
• v.12 no.2
• /
• pp.59-65
• /
• 1990

In order to predict the shelf-life of cigarettes packaged in typical flexible film under conditions of various temperature, relative humidity and sealing degree, a computer iterative technique was used. Although there were some significant differences at initial equilibrium relative humidity(55%), the experimental results agree fairly well with predictions following the student's t test($\alpha$=0.01) in most cases. Essentially, the higher the storage temperature, the shorter the shelf-life of the cigarette product. The bigger the differences from the initial equilibrium relative humidity, the shorter the storage period of the cigarette. Moisture transfer through the film at relatively high temperature gave higher confidence. The sealing degree, one of the storage parameters, appeared to be a major influencing factor to shelf-life. Slopes($\beta$) of the temp., sealing degree and %rh of the dependent variable to shelf life were 0.49, -0.39 and -0, 28 respectively, when analysed by multiple regression of SPSS software. Below 600m1/min sealing decree of the packed cigarette through the sealing Position at 30mmH20 differential pressure, the shelf-life could be increased by more than six months.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3665-3670
• /
• 2012

Metal-p-$NH_2$-Bn-DOTA (paraammionobenzyl-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid: ABDOTA) complex was synthesized and purified for bio-tagging to quantify biological target materials using laser ablation (LA)-ICP-MS. Since the preparation of a pure and stable tagging complex is the key procedure for quantification, magnetic particles were used to purify the synthesized metal-ABDOTA complex. The magnetic particles immobilized with the complex attracted to a permanent magnet, resulting in fast separation from free un-reacted metal ions in solution. Gd ions formed the metal-complex with a higher yield of 64.3% (${\pm}3.9%$ relative standard deviation (RSD)) than Y ions, 52.3% (${\pm}2.5%$ RSD), in the pH range 4-7. The complex bound to the magnetic particles was released by treatment with a strong base, of which the recovery was 81.7%. As a reference, a solid phase extraction (SPE) column packed with Chelex-100 resin was employed for separation under similar conditions and produced comparable results. The tagging technique complemented polydimethylsiloxane (PDMS) microarray chip sampling in LA-ICP-MS, allowing determination of small sample volumes at high throughputs. For application, immunoglobulin G (IgG) was immobilized on the pillars of PDMS microarray chips and then tagged with the prepared Gd complex. IgG could then be determined through measurement of Gd by LA-ICP-MS. A detection limit of 1.61 ng/mL (${\pm}0.75%$ RSD) for Gd was obtained.

• Transactions of Materials Processing
• /
• v.17 no.6
• /
• pp.412-419
• /
• 2008

Using lightweight materials in vehicle manufacturing in order to reduce energy consumption is one of the most effective approach to decrease pollutant emissions. As a lightweight material, magnesium is increasingly employed in automotive parts. However, because of its hexagonal closed-packed(HCP) crystal structure, in which only the basal plane can move, the magnesium alloy sheets show low ductility and formability at room temperature. Thus the press forming of magnesium alloy sheets has been performed at elevated temperature within range of $200^{\circ}C{\sim}250^{\circ}C$. Here we try the possibility of sheet metal forming at room temperature by adopting incremental forming technique with rotating tool, which is so called as rotational-incremental sheet forming(RISF). In this rotational-incremental sheet forming the spindle tool rotates on the surface of the sheet metal and moves incrementally with small pitch to fit the sheet metal on the desired shape. There are various variables defining the formability of sheet metals in the incremental forming such as speed of spindle, pitch size, lubricants, etc. In this study, we clarified the effects of spindle speed and pitch size upon formability of magnesium alloy sheets at room temperature. In case of 0.2, 0.3 and 0.4mm of pitch size with hemispherical rotating tool of 6.0mm radius, the maximum temperature at contact area between rotating tool and sheet metal were $119.2^{\circ}C,\;130.8^{\circ}C,\;and\;177.3^{\circ}C$. Also in case of 300, 500, and 700rpm of spindle speed, the maximum temperature at the contact area were $109.7^{\circ}C,\;130.8^{\circ}C\;and\;189.8^{\circ}C$.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.816-822
• /
• 2013

In modern networks, data rate is getting faster and transferred data is extremely increased. At this point, the malicious codes are evolving to various types very fast, and the frequency of occurring new malicious code is very short. So, it is hard to collect/analyze data using general networks with the techniques like traditional intrusion detection or anormaly detection. In this paper, we collect and analyze the data more effectively with cloud environment than general simple networks. Also we analyze the malicious code which is similar to real network's malware, using botnet server/client includes DNS Spoofing attack.