• Journal of Information Technology Applications and Management
• /
• v.26 no.2
• /
• pp.13-26
• /
• 2019

The purpose of this study is to examine the effect of each of the two technology acceptance factors(employees' attitude toward smart factory technology, and ease of smart factory technology use) on the introduction level of each of the three smart factory technologies (manufacturing big data technology, automation technology, and supply chain integration technology), and in turn, the effect of each of the three smart factory technologies on manufacturing performance. This study employed PLS statistics software package to empirically validate a structural equation model with survey data from 100 domestic small-and medium-sized manufacturing firms (SMMFs). The analysis results revealed the followings. First, it is founded that employees' attitude toward smart factory technology influenced all of the three smart factory technology introduction levels in a positive manner. In particular, SMMFs of which employees had more favorable attitude toward smart factory technology tended to increase introduction levels of both automation technology and supply chain integration technology more than in the case of manufacturing big data technology. Second, ease of smart factory technology use also had a positive impact on each of the three smart factory technology introduction levels, respectively. A noteworthy finding is this : SMMFs which perceived smart factory technology as easier to use would like to elevate the introduction level of manufacturing big data technology more than in the cases of either automation technology or supply chain integration technology. Third, smart factory technologies such as automation technology and supply chain integration technology had affirmative impacts on manufacturing performance of SMMFs. These results shed some valuable insights on the introduction of smart factory technology : The success of smart factory heavily depends on organization-and people-related factors such as employees' attitude toward smart factory technology and employees' perceived ease of smart factory technology use.

• Coupled systems mechanics
• /
• v.8 no.4
• /
• pp.299-313
• /
• 2019

The paper represents computer modeling of the deformed state of physically nonlinear transversally isotropic bodies with hole. In order to describe the anisotropy of the mechanical properties of transversally-isotropic materials a structurally phenomenological model has been used. This model allows representing the initial material in the form of the coupled isotropic materials: the basic material (binder) considered from the positions of continuum mechanics and the fiber material oriented along the anisotropy direction of the original material. It is assumed that the fibers perceive only the axial tensile-compression forces and are deformed together with the base material. To solve the problems of the theory of plasticity, simplified theories of small elastoplastic deformation have been used for a transversely-isotropic body, developed by B.E. Pobedrya. A simplified theory allows applying the theory of small elastoplastic deformations to solve specific applied problems, since in this case the fibrous medium is replaced by an equivalent transversely isotropic medium with effective mechanical parameters. The essence of simplification is that with simple stretching of composite in direction of the transversal isotropy axis and in direction perpendicular to it, plastic deformations do not arise. As a result, the intensity of stresses and deformations both along the principal axis of the transversal isotropy and along the perpendicular plane of isotropy is determined separately. The representation of the fibrous composite in the form of a homogeneous anisotropic material with effective mechanical parameters allows for a sufficiently accurate calculation of stresses and strains. The calculation is carried out under different loading conditions, keeping in mind that both sizes characterizing the fibrous material fiber thickness and the gap between the fibers-are several orders smaller than the radius of the hole. Based on the simplified theory and the finite element method, a computer model of nonlinear deformation of fibrous composites is constructed. For carrying out computational experiments, a specialized software package was developed. The effect of hole configuration on the distribution of deformation and stress fields in the vicinity of concentrators was investigated.

• Advances in concrete construction
• /
• v.13 no.1
• /
• pp.45-69
• /
• 2022

This paper investigates the shear behavior of reinforced concrete haunched beams (RCHBs) without stirrups. The research objective is to study the effectiveness of the ideal steel fiber (SF) ratio, which is used to resist shear strength, besides the influence of main steel reinforcement, compressive strength, and inclination angles of the haunched beam. The modeling and analysis were carried out by Finite Element Method (FE) based on a software package, called Atena-GiD 3D. The program of this study comprises two-part. One of them consists of nine results of experimental SF RCHBs which are used to identify the accuracy of FE models. The other part comprises 81 FE models, which are divided into three groups. Each group differed from another group by the area of main steel reinforcement (A_s) which are 226, 339, and 509 mm². The other parameters which are considered in each group in the same quantities to study the effectiveness of them, were steel fiber volumetric ratios (0.0, 0.5, and 1.0)%, compressive strength (20.0, 40.0, 60.0) MPa, and the inclination angle of haunched beam (0.0°, 10.0°, and 15.0°). Moreover, the parametric analysis was carried out on SF RCHBs to clarify the effectiveness of each parameter on the mechanical behavior of SF RCHBs. The results show that the correlation coefficient (R²) between shear load capacities of FE proposed models and shear load capacities of experimental SF RCHBs is 0.9793, while the effective inclination angle of the haunched beam is 10° which contributes to resisting shear strength, besides the ideal ratio of steel fibers is 1% when the compressive strength of SF RCHBs is more than 20 MPa.

• Journal of People, Plants, and Environment
• /
• v.24 no.5
• /
• pp.519-527
• /
• 2021

Background and objective: This study was conducted to establish a Plant Hardiness Zone (PHZ) map, investigate the effect of global warming on changes in PHZ, and elucidate the difference in the distribution of evergreen trees between the central and southern region within hardiness Zone 7b in Korea. Methods: Mean annual extreme minimum temperature (EMT) and related temperature fluctuation data for 40 years (1981 to 2020) in each of the meteorological observation points were extracted from the Open MET Data Portal of the Korea Meteorological Administration. Using EMT data from 60 meteorological observation points, PHZs were classified according to temperature range in the USDA Plant Hardiness Zone Map. Changes in PHZs for each decade related to the effects of global warming were analyzed. Temperature fluctuation before and after the day of EMT were analyzed for 4 areas of Seoul, Suwon, Suncheon, and Jinju falling under Zone 7b. For statistical analysis, descriptive statistics and ANOVA were performed using the IBM SPSS 22 Statistics software package. Results: Plant hardiness zones in Korea ranged from 6a to 9b. Over four decades, changes to warmer PHZ occurred in 10 areas, especially in colder ones. Based on the analysis of daily temperature fluctuation, the duration of sub-zero temperatures was at least 2 days in Seoul and Suwon, while daily maximum temperatures were above zero in Suncheon and Jinju before and after EMT day. Conclusion: It was found that the duration of sub-zero temperatures in a given area is an important factor affecting the distribution of evergreen trees in PHZ 7b.

• The korean journal of orthodontics
• /
• v.52 no.5
• /
• pp.313-323
• /
• 2022

Objective: This study aimed to estimate the clinical effects of different types of bone-anchored maxillary protraction devices by using a network meta-analysis. Methods: We searched seven databases for randomized and controlled clinical trials that compared bone-anchored maxillary protraction with tooth-anchored maxillary protraction interventions or untreated groups up to May 2021. After literature selection, data extraction, and quality assessment, we calculated the mean differences, 95% confidence intervals, and surface under the cumulative ranking scores of eleven indicators. Statistical analysis was performed using R statistical software with the GeMTC package based on the Bayesian framework. Results: Six interventions and 667 patients were involved in 18 studies. In comparison with the tooth-anchored groups, the bone-anchored groups showed significantly more increases in Sella-Nasion-Subspinale (°), Subspinale-Nasion-Supramentale(°) and significantly fewer increases in mandibular plane angle and the labial proclination angle of upper incisors. In comparison with the control group, Sella-Nasion-Supramentale(°) decreased without any statistical significance in all treated groups. IMPA (angle of lower incisors and mandibular plane) decreased in groups with facemasks and increased in other groups. Conclusions: Bone-anchored maxillary protraction can promote greater maxillary forward movement and correct the Class III intermaxillary relationship better, in addition to showing less clockwise rotation of mandible and labial proclination of upper incisors. However, strengthening anchorage could not inhibit mandibular growth better and the lingual inclination of lower incisors caused by the treatment is related to the use of a facemask.

• Journal of the Korean Dietetic Association
• /
• v.28 no.4
• /
• pp.247-266
• /
• 2022

This study examines the sociodemographic and anthropometric data, health-related and dietary habits, and nutrient intakes according to depression levels in men and women aged over 65 years. A total of 2,938 subjects were analyzed from the 2016~2018 Korean National Health and Examination Survey. Statistical analyses for complex samples were applied using the SPSS software package. Based on the health questionnaire-9, the subjects were applied into two groups. The percentage of depression in women was significantly higher than in men (P<0.001). The factors associated with men's depression were marital status (P<0.05), household income (P<0.001), occupation (P<0.01), and body mass index (P<0.01). Women's depression was found to be significantly associated with household income (P<0.001), education level (P<0.01), basic living allowance (P<0.001), and body weight status (P<0.01). Perceived health status, stress level, quality of life, not feeling very well for the last two weeks, and activity restriction (P<0.001, respectively) were significant health-related habits associated with depression in both sexes. Diabetes (P<0.05) amongst men and hypertriglyceridemia (P<0.01) in women were significant factors associated with depression. Frequency of meals and eating meals together were significant dietary habits associated with depression by sex. Significant associations between improper nutrient intake and depression were also derived for both sexes; 7 nutrients were identified in men and 10 in women. Our results indicate that different factors are associated with depression in the elderly based on sex. Hence, sex-based health promotion programs are required to prevent the onset of depression among the elderly.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.459-466
• /
• 2022

Switching surges are a common type of phenomenon that occur on any sort of power system network. These are more pronounced on long transmission lines and in high voltage converter stations. At AC/DC hybrid transmission lines, the insulation coordination of such lines is mainly dictated by the peak level of switching surges, the most dangerous of which include three phase line energization and AC/DC converter station. The power system structure consist of AC/DC hybrid transmission lines which is combination of AC 765kV and ±500kV HVDC 1 bipole system for contingency analysis. The power system under study and its components are simulated using EMTDC software package, the effects of the various AC/DC mixing power lines are reviewed. The developed models of EMTDC conversion lines based on combination of AC/DC system are simulated and the characteristics of switching surge over-voltage from its results are discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.2
• /
• pp.212-220
• /
• 2023

Over the past 50 years, red sea bream Pagrus major has been selectively bred for more than 10 generations to improve its growth rate. However, the effect of genetic factors on growth under low- or non-fish meal diet is still unclear. Here, we analyzed 251 individuals randomly mating 21 females (dam) and 16 males (sire) to determine the difference in growth between non-fish meal (i.e., treatment group) and fish meal-based diet (i.e., control group), if any. The kinship coefficient between each group of individuals and their parents was estimated by the KING (Kinship-based Inference for GWASs) software package. The presumed parents of 74 individuals in the treatment group and 57 individuals in the control group could be effectively identified. Notably, one specific female was consistently related to high- rather than low-growth individuals in both groups. In addition, more than one parent in each group was related to either high- or low-growth individuals. Parents of both high-growth individuals in the treatment group and low-growth individuals in the control group were also identified. Although further study is required on various growth factors, this study suggests the possibility of selective breeding under non-fish meal diet.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2023

Backgrounds: Pain management is one of the most important factors affecting the success of pediatric dentistry. Therefore, new needle- and pain-free local anesthesia techniques have been developed in parallel with technological advancements. The purpose of this study is to compare the pain perception and dental anxiety levels associated with a needle-free injection system (Comfort-in^TM) and the classic needle method during treatment-required infiltration anesthesia in children. Methods: This randomized controlled crossover split-mouth clinical study included 94 children who required dental treatment with local anesthesia using a dental needle or needle-free injection system for the bilateral primary molars. The Wong-Baker Scale (WBS) was used to measure pain perception at different times, and the Modified Child Dental Anxiety Scale (MCDAS) was used to measure the anxiety level of the child. A statistical software package was used to process the data. Statistical significance was set at P < 0.05. Results: There was no significant difference between the needle-free injection system and dental needle method during the induction stage for filling and pulpotomy (P > 0.05). "Pain on postoperative 1st day" was similar in both types of anesthesia (P = 0.750). Conclusions: The needle-free injection system was as effective as the dental needle method. The Comfort-in^TM system was an acceptable alternative for patients during the postoperative period. Understanding how pain management may be provided during local anesthesia administration and a child's fear and anxiety regarding the dentist may lead to better dental compliance.

• Communications for Statistical Applications and Methods
• /
• v.30 no.1
• /
• pp.95-107
• /
• 2023

Purpose: The statistical analysis of point processes on linear networks is a recent area of research that studies processes of events happening randomly in space (or space-time) but with locations limited to reside on a linear network. For example, traffic accidents happen at random places that are limited to lying on a network of streets. This paper applies techniques developed for point processes on linear networks and the tools available in the R-package spatstat to estimate the intensity of traffic accidents in Leon County, Florida. Methods: The intensity of accidents on the linear network of streets is estimated using log-linear Poisson models which incorporate cubic basis spline (B-spline) terms which are functions of the x and y coordinates. The splines used equally-spaced knots. Ten different models are fit to the data using a variety of covariates. The models are compared with each other using an analysis of deviance for nested models. Results: We found all covariates contributed significantly to the model. AIC and BIC were used to select 9 as the number of knots. Additionally, covariates have different effects such as increasing the speed limit would decrease traffic accident intensity by 0.9794 but increasing the number of lanes would result in an increase in the intensity of traffic accidents by 1.086. Conclusion: Our analysis shows that if other conditions are held fixed, the number of accidents actually decreases on roads with higher speed limits. The software we currently use allows our models to contain only spatial covariates and does not permit the use of temporal or space-time covariates. We would like to extend our models to include such covariates which would allow us to include weather conditions or the presence of special events (football games or concerts) as covariates.