• Journal of Embryo Transfer
• /
• v.19 no.3
• /
• pp.219-227
• /
• 2004

This study was conducted to develop a serum-free, defined medium of IVM of pig oocytes. The TCM-199 with supplemented with polyvinylalcohol(PVA), polyvinylpyrrollidone(PVP) and porcine follicular fluid(pFF) were used as basal medium. The effects of the these additives on the rates of maturity and development under in-vitro fertilization and in vitro culture were examined and subsequently considered on the possibilities be sustituted for the bovine serum albumin(BSA). Maturation rate of pig oocytes in IVM media containing PVA(82.4％), pFF(89.4％) and BSA(90.0％) were significantly higher(P<0.05) than that of PVP(78.6％). Cleavage rate after IVF of PVP(64％) was significantly lower(P<0.05) than these of PVA(73％), pFF(77％) and BSA(73％) supplements. in vitro development rates to morulae and blastocyst on PVP(54％) were also significantly lower(P<0.05) than these of the supplements of PVA(63％), pFF(69％) and BSA(65％). In comparison of maturation and fertilization rates of pig oocytes in each supplements, the maturity rates of PVA(82.4％), pFF(89.4％) and BSA(90.0％) were significantly lower(P<0.05) than that of PVP(72.4％) and while, the fertilization rates of pFF(87.1％) and BSA(89.1％) were significantly higher(P<0.05) than these of PVA(78.0％) and PVP(70.6％). It may be concluded that PVA and pFF can be substituted far BSA in medium for culturing pig oocytes; however, it may be considered that PVP were limited to for BSA in the in vitro culture of the embryos.

• Membrane Journal
• /
• v.24 no.3
• /
• pp.231-239
• /
• 2014

Polyetherimide (PEI) membranes for separators in Zn air batteries were prepared via phase inversion process from casting solution composed of PEI, n-methylpyrolidone (NMP), and polyvinylpurrolidone (PVP). Furthermore, Zn air batteries were fabricated with the separators. The effects of PEI content and PVP addition in the casting solution on the morphology, mechanical strength, ionic conductivity were investigated through SEM, stress-strain test and ac impedance test. The elelctrochemical performances of the batteries were evaluated through galvanostatic discharge analysis. The mechanical strength of the membrane increased with increasing PEI composition in the casting solution. Little effect of PVP addition into the solution on the mechanical strength of the membrane was investigated. The ionic conductivity value decreased with increasing PEI composition in the solution. With addition of PVP, ionic conductivity of membrane increased until 10 wt% to show the maximum value of 0.1 S/cm. In the higher range of PVP addition over 10%, the ionic conductivity decreased with increasing PVP addition. Ionic conductivity of separator strongly affected the capacity of Zn air battery, and the battery assembled with the separator which showed high ionic conductivity showed high capacity.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.5
• /
• pp.594-602
• /
• 2019

Objective : Although surgical intervention, such as percutaneous vertebroplasty (PVP), is the standard treatment for osteoporotic vertebral compression fractures (OVCFs), its effectiveness and safety are unclear. Therefore, this study compared the safety and efficacy of conservative treatment with that of PVP for acute OVCFs. Methods : Patients with single-level OVCFs who were treated conservatively with a transdermal fentanyl patch (TFP) or with PVP between March 2013 and December 2017 and followed-up for more than 1 year were retrospectively evaluated. Patients with pathologic fractures, fractures of more than two columns, or a history of PVP were excluded. Clinical outcomes (visual analog scale [VAS] scores) and radiographic factors were evaluated, including changes in the compression rate of the corresponding vertebral body at onset and after 12 months, sagittal Cobb angle at onset and after 6 and 12 months, and the incidence of adjacent compression fractures. Results : Of the 131 patients evaluated, 75 were treated conservatively using TFPs and 56 underwent PVP. We divided the patients into TFP and PVP groups. Their baseline characteristics (including sex, level of fracture, and bone mineral density T-scores) were similar, but the TFP group was significantly younger. The overall VAS score for pain showed a greater decrease during the first month (1 week after PVP) in the PVP group but remained similar in the two groups thereafter. The compression rate after 12 months increased in the TFP group but decreased in the PVP group. Five patients in the PVP group, but none in the TFP group, experienced adjacent compression fractures within 12 months. Conclusion : We compared clinical and radiological outcomes between the TFP and PVP groups. The immediate pain reduction effect was superior in the PVP group, but the final clinical outcome was similar. Although the PVP group had a better-preserved compression rate than the TFP group for 1 year, the development of adjacent fractures was significantly higher. Although TFPs seemed to be beneficial in reducing the failure rate of conservative treatment, the possibility of side effects (22.6%, 17 out of 75 patients, in this study) should be carefully monitored.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.42-42
• /
• 2009

To make up for the disadvantages of PVA gate, we blend PVP(20% wt) with PVA(5% wt) as a gate material. The best ratio for the mixture was 5:5, PVP-PVA blended gate used MIM structure showed better performance in leakage current and capacitance. PVP-PVA blended gate was fabricated by spin-coating process and pentacene was used as an organic TFT channel layer by thermal evaporation. Overall OTFT performance has also increased as PVP-PVA blended gate has relatively lower leakage current and higher capacitance than pure PVA gate has.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1027-1029
• /
• 2004

In this paper, we have fabricated pentacene thin film transistors (TFTs) using polyvinylphenol (PVP) copolymer and cross-linked PVP as gate insulator on glass and plastic (PET) substrate. Depending on the density of PVP and cross-link material the performance has been changed. We obtained the best device performance with the mobility of 0.32cm2/V${\cdot}$sec and the on/off current ratio of 1.19${\times}$106 for the case of 10wt% PVP copolymer mixed with 5wt% poly (melamine-co-formaldehyde). Additionally using pentacene TFTs with the above PVP gate insulator, we fabricated the integrated circuits including inverter which produced the gain of 9.7.

• Textile Coloration and Finishing
• /
• v.3 no.2
• /
• pp.43-48
• /
• 1991

Cellulose acetate (CA) and poly-4-vinyl pyridine (PVP) in various weight proportions were mixed in a mixed solvent of trifluoroacetic acid: methylene chloride/6:4 (v:v). CA was miscible with PVP in that solvent system. CA/PVP/solvent show liquid crystal in a certain range of concentration and the nature of that liquid crystal was cholesteric. Films of the liquid crystal composite cast from the liquid crystal solutions of CA/PVP were tested in a viewpoint of biomembrane. Results show that considering permselectivity CA/PVP membrane is better than that of CA and CA/PVP membrane is closer to cell membrane.

• Journal of Pharmaceutical Investigation
• /
• v.8 no.2
• /
• pp.11-17
• /
• 1978

Phenobarbital의 용출속도(溶出速度)를 증가시키기 위하여 PVP와의 공침물(共沈物)을 형성(形成)한 후 일정(一定)한 표면적(表面積)하에서의 용출속도(溶出速度)를 비교검토(比較檢討)하였다. $37^{\circ}C$, 150r.p.m${\times}$에서의 rate constannt of dissolution, k,는 phenobarbital이 $8.75{\times}10^{-6}M/min$, 1 : 2 phenobarbital-PVP coprecipiate는 $5.35{\times}10^{-5}M/min$이었으며, activation energy of dissolution, Ea는 phenobarbital이 약 10,600cal/mole coprecipitate는 약 5,800cal/mol이었다. 그리고 X-ray diffraction study에 의(依)하면 페노바르비탈 단일물질(單一物質)이나, PVP와의 physical mixture에서는 페노바르비탈의 결정피크를 나타내었으나, PVP와의 공침물(共沈物)의 경우(境遇)에는 페노바르비탈의 결정피크를 인지(認知)할 수 없었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.650-653
• /
• 2009

Hybrid nanofibers made of $Cu_2O$ and polyvinyl pyrrolidone were fabricated by electrospinning on glass substrates. The current magnitude of the $Cu_2O$-PVP hybrid nanofibers is 10 times larger than that of pure PVP nanofibers. In addition, $Cu_2O$-PVP nanofibers possess high sensitivity to air at room temperature than pure PVP nanifibers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.245-245
• /
• 2008

In this work, we describe the characterization of PVP films synthesized by spin-coater method and fabricate OTFTs of a bottom gate structure using pentacene as the active layer and polyvinylphenol (PVP) as the gate dielectric on Au gate electrode. We investigated the surface and electrical properties of PVP layer using an AFM method and MIM structure, and estimated the device properties of OTFTs including $I_D-V_D$, $I_D-V_G$, threshold voltage $V_T$, on/off ratio, and field effect mobility.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.289-295
• /
• 2010

In this study, the enhancement of the thermal conductivity of water in the presence of multi-walled carbon nanotubes, MWCNT, was investigated. Sodium Dodecyl Sulfate, SDS, and Polyvinylpyrrolidone, PVP, were employed as the dispersant. SDS or PVP was added in pure water. And then, MWCNT of 0.0005, 0.001, 0.002, 0.003, 0.004, 0.005, 0.01, and 0.02 vol% was dispersed respectively. The thermal conductivity and the viscosity were measured with a transient hot-wire instrument built for this study and the DV II+ Pro viscometer. The results showed that PVP had good thermal conductivity at 300 wt% and this was better than that of SDS 100 wt%, also, the viscosity of nano fluid added PVP rapidly increased until 0.02 vol%.