• Resources Recycling
• /
• v.10 no.6
• /
• pp.3-8
• /
• 2001

This study was examed about leaching behavior in order to separate plasticizer selectively before dechlorination from flexible PVC material in alkali solutions at $80~120^{\circ}C$. The dechlorination of that was not almost occurred below $100^{\circ}C$. But the yield of elution of plasticizer was 100% above 5M NaOH. Therefore, by controlling alkali concentration and reaction temperature, it is possible to extract the plasticizer selectively without taking dechlorination.

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2296-2302
• /
• 2018

Internally plasticized PVC was prepared via chemical reaction of azide PVC and alkynyl group containing castor oil methyl ester. The chemical structure of alkynyl group containing castor oil methyl ester and internally plasticized PVC was characterized with FT-IR and $^1H$ NMR. Properties of internally plasticized PVC, including thermal stability, tensile tests and resistance to extraction in different solvents, was investigated. The results showed that alkynyl group containing castor oil methyl ester, as internal plasticizer of PVC, not only decreased the $T_g$ of PVC from $84.6^{\circ}C$ to $41.6^{\circ}C$ efficiently, but also presented no plasticizer loss in five different solvents. The tensile tests showed that elongation at break and tensile strength of internally plasticized PVC was 353.8% and 18.1 MPa. The internally plasticized PVC has potential application in replacing the traditional PVC material in PVC products with high durability.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.14-19
• /
• 2002

PVC sheet was treated in O~10M NaOH solutions at $80~150^{\circ}C$ for O~7 hour, in order to study the leaching phenomena of plasticizer. The yield of phthalic acid produced by hydrolysis of DOP was increased greatly with increasing temperature and NaOH concentration by accelerating of alkali catalyst. The yield of phthalic acid was reached ca. 100% in 10M NaOH at $150^{\circ}C$ over 3 hours. Therefore, the plasticizer containing 30% in PVC sheet could be hydrolyzed in alkali solutions before the occurrence of dehydrochlorination. Besides, in the thermal reaction, the pores were produced in the PVCsheet by the hydrolysis of DOP.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.342-353
• /
• 2003

This work is about the development of jet-fuel resistant PVC sealant using a polyester plasticizer. PVC copolymer was compounded with adipic acid glycol(Songcizer P-3000) or DOP plasticizers. Fuel-immersed and non-immersed penetration, solubility, flow, and elongation by tensile adhesion of PVC compounds were measured. Penetration increase by fuel immersion and solubility of PVC compounds with adipic acid glycol polyester plasticizer were smaller than those of PVC compounds with DOP plasticizer. Elongation by tensile adhesion test of PVC compound containing 500 phr of Songcizer P-3000 decreased proportionally to the content of DCDP (dicyclopentadiene) base petroleum resin adhesion promoter. Calcium carbonate($CaCO_3$) filler inhibited the diffusion of fuel in all the PVC compounds and decreased the solubility of PVC compounds containing Songcizer P-3000.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.135-142
• /
• 2008

Plasticizer and heavy metals in domestic PVC wallpaper manufactured in Korea after 2005 were analyzed to identify the contained quantity in comparison with the 2002 manufactured PVC wallpapers. Plasticizer of wallpapers was analyzed by the method KSM1991 which uses soxhlet extraction with n-hexane and GC/FID. Heavy metals were pre-treated with 0.07 mol/L hydrochloric acid (HCl) and analyzed by ICP/OES according to the EN 71-part 3 method. DEHP, DINP, DEP, acetyl tributyl citrate were identified from wallpaper. Contents of DEHP, DINP were 0.2~11.3%, 17.9~27.8% respectively in 6 wallpapers, DEP and acetyl tributyl citrate were 1.5%, 8.9% respectively in one wallpaper. Plasticizers have changed from DEHP that has possibility of hazards to DINP, DEP and acetyl tributyl citrate as compared with 2002. Heavy metals were detected under guide line from all of the wallpapers except fire-retardant wallpaper contain antimony. While PVC wallpaper was improved by use of various plasticizer, functional wallpapers such as fire-resistant wallpaper contain high antimony in this study.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.2
• /
• pp.103-109
• /
• 2005

New PVC plasticizer, 2,2,4-trimethyl-1,3-pentanediol-1-butyrate-3-isobutyrate was synthesized via simple esterification with butyric acid and Texanol(a trademark of Eastman Chemicals), the mixture of 2,2,4-trimethyl-1,3-pentanediol-3-isobutyrate and 2,2,4-trimethyl-1,3-pentanediol-1-isobutyrate. The analysis of $^1H-1D,\;^{13}C-1D$ NMR and HMBC spectra identified internal-ester-transfer of 2,2,4-trimethyl-1,3-pentanediol-1-isobutyrate during the reaction. 2,2,4-trimethyl-1,3-pentanediol-1-butyrate-3-isobutyrate gave better properties in PVC than 2,2,4-trimethyl-1,3-pentanediol diisobutyrate(TXIB, a trademark of Eastman Chemicals) such as lower viscosity, higher tensile strength and better elongation. In particular, remarkably reduced migration compared with TXIB suggested a reduced emission of VOC(volatile organic compound) from PVC.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.42-49
• /
• 2017

To replace phthalate plasticizer for PVC, acetylated monoglyceride (AMG) plasticizers were prepared from plant oil and their plasticization effects were also investigated. Transesterification of coconut oil by glycerol followed by acetylation with acetic anhydride gave AMG-CoCo (Coco : Coconut Oil). In addition, AMG-GMO (GMO : Glycerol monooleate) and AMG-GMO-Epoxy were synthesized by acetylation and epoxidation with glycerol monooleate. It was found that the thermal stability of AMG plasticizers increased in the following order: AMG-GMO-Epoxy > AMG-GMO > AMG-CoCo and all three plasticizers were thermally more stable than those of common petroleum-based plasticizer DOP (Dioctyl phthalate). The tensile strain values of the PVC containing AMG compounds were ca. 770~810%, while tensile strength values were ca. 19~22 MPa, which were higher than those of PVC containing DOP. DMA (Dynamic Mechanical Analysis) results showed that the miscibility of AMG-GMO-Epoxy in PVC was excellent and the $T_g$ of PVC containing AMG-GMO-Epoxy at 50 phr decreased down to $24^{\circ}C$. Finally, the leaching experiment result showed that the weight loss values of PVC containing AMG-GMO and AMG-GMO-Epoxy at 50 phr were as low as 2 and 1%, respectively, indicating that they have high water migration resistance. The above findings suggested that AMG-GMO-Epoxy could be one of plant oil-based PVC plasticizers to replace DOP.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.211-220
• /
• 1996

New thin-and diselena-crown ethers containing two suffer and selenium donor atoms have been prepared. And then, mercury ($Hg^{2+}$) ion-selective electrodes with PVC-plasticizer (STPB) based on some macrocycles as neutral carriers were also made. The electrochemical selectivities for various ions, and the effects for macrocycles, matrix of membranes, ratio of plasticizer to macrowcles, concentration and pH of test solution were investigated on the $Hg^{2+}$ ion-selective electrodes. The 1, 10-diselena-18-crown-6-PVC-STPB (sodium tetraphenylborate) exhibited good linear responses of ${28.2}\pm{0.6}$ decade-1 for $Hg^{2+}$ ion in the conientration ranges of $10^{-2}~10^{-6}$ M $Hg^{2+}$ ion. This electrode exhibited comparatively good selectivities for $Hg^{2+}$ ion in comparison with alkali and alkaline earth metal ions, some heavy metal ions and rare earth metal ion in the range of pH 2.5~6.0. In addition, this electrode was applied as a sensor in the titration of $Hg^{2+}$ ion with $1^-$ ion in water.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.247-255
• /
• 2015

Poly(1,2-propylene glycol adipate) (PPA) was used as an environmentally friendly plasticizer in flexible poly(vinyl chloride) (PVC). Thermal, mechanical, and rheological properties of the PVC/PPA blends were characterized by differential scanning calorimetry, dynamic mechanical analysis, tensile test, scanning electron microscopy and small amplitude oscillatory shear rheometry. The results showed that PPA lowered the glass transition temperature of PVC. The introduction of PPA could decrease tensile strength and Young's modulus of the PVC/PPA blends; however, elongation-at-break was dramatically increased due to the plastic deformation. The plasticization effect of PPA was also manifested by the decrease of dynamic storage modulus and viscosity in the melt state of the blends. The results indicated that PPA had a good plasticizing effect on PVC.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.322-327
• /
• 2015

Objectives: The major objective of this study is the oral dose toxicity test and skin irritation test of eco-friendly plasticizer using crude glycerol derived from the biodiesel process. Methods: Glyceroldiacetate laurate(GDL) was synthesized from glycerol monolaurat(GML) and acetic acid. The synthesis of the GDL plasticizer was measured with nuclear magnetic resonance spectroscop(NMR) and FT-IR(Fourier Transform Infrared Spectrometer). To provide information on the safety of GDL, we carried out an oral dose toxicity test for GDL in Sprague-Dawley rats. Also, we carried out a skin irritation test for GDL in New Zealand White rabbits. Results: The oral dose toxicity test in Sprague-Dawley rats showed that GDL is a non-toxic material. The result of the skin irritation test on New Zealand White rabbits showed that GDL is non-irritating. Conclusions: From the results of oral dose toxicity test and skin irritation test, we concluded that the developed plasticizer showed excellent eco-friendly property. Based on our results, we confirmed the development of an eco-friendly non-phthalate plasticizer. Applicability for PVC toys and food and drug packaging materials was found.