• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.125-130
• /
• 1992

A resistive-type humidity sensors have been fabricated using cross-linked PMMA thin film as sensing material and their humidity characteristics have been investigated. The sensor coated of the cross-linked PMMA with PVA exhibited largely variation of resistance by increase of relative humidity and less than 3% of hysteresis. Furthermore, the fabricated sensor exhibited superior long-term stability. The response time of the PMMA humidity sensor was about 7 min. for adsorption and about 5 min. for desorption respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.71-76
• /
• 2022

We evaluated and developed a 6th generation large-size polisher in the type of face-up and Oscar. We removed the hillocks of the low temperature poly-silicon (LTPS) thin film with this polisher. The surface roughness of LTPS was lowered from 7.9 nm to 0.6 nm after CMP(chemical mechanical polishing). The thickness of the LTPS is measured through reflectance in real time during polishing, and the polishing process is completed according to this thickness. The within glass non-uniformity (WIGNU) was 6.2% and the glass-to-glass non-uniformity (GTGNU) was 2.5%, targeting the LTPS thickness of 400Å. In addition, the residual slurry after the CMP process was removed through the Core Flow PVA Brush and alkaline chemical.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1313-1314
• /
• 2007

This paper presents organic thin-film transistors (OTFTs) with poly(3-hexylthiophene)(P3HT) semiconductor and several polymeric dielectric materials of poly(vinyl phenol)(PVP), poly(vinyl alcohol)(PVA), and polyimide(PI) by using soluble process. The fabricated OTFT's have inverted staggered structure using transmission line method(TLM) pattern. In order to evaluate the electrical characteristics of the OTFT, capacitance-voltage(C-V) and current-voltage(I-V) were measured. C-V graphs were measured at several frequencies of 100 Hz, 1 kHz, and 1 MHz and ID-VDS graphs according to $V_{GS}$. The current on/off ratio and threshold voltage with each of PVP, PVA, and PI based OTFTs were measured to $10^3$, and -0.36, -0.41, and -0.62 V. Also, the calculated mobility with each of PVP, PVA, and PI was 0.097, 0.095, and 0.028 $cm^{2}V^{-1}s^{-1}$, respectively. In the cases of PVP and PVA, the hole mobility of P3HT was in excellent agreement with the published value of 0.1 $cm^{2}V^{-1}s^{-1}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1160-1166
• /
• 2006

Maxwell-displacement-current (MDC) measuring technique has been applied for the investigation of monolayers of poly(vinyl alcohol)s bearing azobenzene side-chains (6Az5PVA) mixed with p-pentyl-p'-cyano-biphenyls (5CBs) on a water surface. For mixed monolayers containing trans-form 6Az5PVA and LCs, displacement current due to photo isomerization was not generated with alternative photo-irradiation with UV and svisible light. In contrast, for mixed monolaters containing cis-form 6Az5PVA and LCs, displacement current was generated. Finally, it was found that the alignment layers deposited in cis-form could photoregualte the orientation of LCs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.250-251
• /
• 2003

여러 광기록 매질 중 아조(azo)계열의 색소를 첨가한 고분자 필름은 색소의 선택에 따라 원하는 감광 파장대를 선택할 수 있는 특징과 뛰어난 메모리 휘발성, 편광 선택이 가능한 점, 높은 환경적 안정성 때문에 1986년 Todorow 그룹이 아조색소를 함유한 고분자 필름의 광유도 비등방성에 관한 논문을 발표한 이래 많은 연구가 이루어지고 있다. 아조계열 색소분자는 PVA 고분자 매트릭스(matrix)속에서 trans 혹은 cis이성질체 중 하나의 상태로 존재할 수 있으나 trans 상태는 cis 상태보다 안정한 상태이므로 광이 없을 때는 대부분 trans 상태로 존재하게 된다. (중략)

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.71-76
• /
• 2007

We have demonstrated the resonant resistance pattern changes of the polymer film in the quartz crystal analysis by the function of the molecular polarity phase transition phenomena. PVA and PMMA/PVAc blend films were used as hydrophilic and/or hydrophbic film, respectively. In the comparison between the hydrophilic shows the pattern changes near by the phase transition temperature. For more detailed explanation, the static capacity in the oscillation parameter was measured and the morphology of Au quartz crystal electrode was studied by AFM. It is suggested that the different resonant resistance pattern change is reliable in the condition of different polarity, and the conclusion is important to analysis of the real mechanism a normal quartz crystal experiments.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.219-223
• /
• 2010

In this study, we fabricated the HgSe nanoparticle-based thin film transistors (TFTs) of back gate structure with PVA gate dielectric. The fabricated TFTs show the improved electrical characteristics in the mobility of $16\;cm^2$/Vs and the on/off ratio of $10^4$ after annealing process at $100^{\circ}C$ for 5 min. AFM images demonstrate that the decrease in surface roughness according to annealing process leads to the improvement of electrical characteristics. The change in drain current caused from the conditions of flexible substrate is investigated under 0.6% strain.

• 보존과학연구
• /
• s.17
• /
• pp.100-122
• /
• 1996

We preformed many treatments to preserve Kim-gu's relics (Baekbum-ilgi and the clothes stained with blood). The first we performed re-paper mount of binding area of baekbumilgi, and fumigated all relics to sterilize microorganism. Then all relics were sealed with biaxially oriented polyvinyalcohol film(BO-PVA film) and $N_2$ gas filled up in the BO-PVA film bags. We investigated the paper condition of Baekbum-ilgi, its brightnees was 25-35%, water content was 9.4%, and acidity was pH 4.3. These results indicated that the paper was very weak. On the other hand, We analyzed his blood type and genetic type with the solidified blood of the clothes. In result, his blood type was AB and were classified 6 genetic types such that HUMTH01 was 7-9 type, HumTPOX was 9-11 type, HumCSF1PO was 12-13 type, HumF13A01 was 4-4type, HumFESFPS was 12-12, and HumvWA was 18-18 type.

• Korea-Australia Rheology Journal
• /
• v.19 no.1
• /
• pp.43-47
• /
• 2007

The polydiacethylene (PDA) is known to change its color by mechanical shear. The shear-induced color transition has been reported with elastomer or film type of PDA. In this paper, we newly investigated the transition with liposome type of PDAs in polymeric solutions. The liposomes were dispersed in Poly(vinyl alcohol) 2% + Sodium borate 1%, Poly(vinyl alcohol) 15% and Hyaluronic acid 1% (PVA/B, PVA, HA). The shear stress was continuously imposed to each solution by stress control type rheometer with coni-cylinder fixture. The degree of color transition was quantified with the characteristic absorbance peak at 540 nm (blue) and 640 nm (red). As a result, PDA liposome in PVA/B solution changed the color from blue to red upon increasing the magnitude of shear (from 0 to 100 Pa) and the duration of shear-imposed time (from 0 to 5400 sec). Meanwhile, PDA liposome in HA or PVA solution did not noticeably change the color, even though the low shear viscosities of the solutions were kept almost constant. This color transition of PDA liposome is expected to measure the magnitude of shear, and to distinguish different responses of polymeric solutions to the applied shear.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.218-224
• /
• 2014

This study was designed to evaluate the effectiveness of 5% sodium fluoride-polyvinyl alcohol (NaF-PVA) tape influencing enamel remineralization by analysing enamel surface microhardness (SMH) and variation of ${\Delta}F$ of QLF. After enamel demineralizing of specimen, these 60 specimens with average KHN of microhardness ranging from 50 to 100 and with ${\Delta}F$ of QLF ranging from -15 to -25 were divided into four groups : group 1 (control group), group 2 (NaF-PVA), group 3 (fluoride varnish, FluoroDose$^{(R)}$ varnish), group 4 (Casein phosphopeptide-amorphous calcium phosphate, Tooth mousse plus$^{TM}$). These specimens were treated with materials and then immersed in artificial saliva. We measured remineralization rate each using surface microhardness (SMH) and Quantitative light-induced fluorescence digital (QLF-D). As a result, NaF-PVA tape is better than group 1, 4 and have comparable remineralization effect with group 3 (p < 0.05).