• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.136-141
• /
• 2005

The application of photovoltaics into building as integrated building components has been paid more attention worldwide. Photovoltaics or solar electric modules are solid state devices, directly converting solar radiation into electricity; the process does not require fuel and any moving parts, and produce no pollutants. So, the purpose of this research is to present how to get PVIB which can be applied building facade and how to apply it. From the basis of these results this study will intend to develop an integrated for optimal design of PV System.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.30-35
• /
• 2008

The purpose of EVA sheet in PV module is to bond or laminate the multiple layers of a module. We studied the influence of EVA sheet gel content on photovoltaic module durability. Gel Content was measured by manufacturing Glass/EVA Sheet/Back Sheet scheme at several curing temperature. Through this experiment, we could confirm that there are changes on Gel Content of EVA Sheet. The transmittance of $140^{\circ}C$/4min process condition was more excellent than the other condition at ultraviolet wavelength range. The thermal stability of $150^{\circ}C$/4min process condition was higher than the other condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.336-336
• /
• 2008

The transcription characteristics in the molding of aspheric glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. The molded lens showed a transcription ratio of 93.4%, which is obtained bycomparing the form accuracy (PV) values of the mold and the molded lens. The transcription of the roughness topography was ascertained by bearing ratio analysis.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.255-259
• /
• 2012

BIPV/T (Building Intergrated PhotoVoltaic/Thermal) is combined system produces electricity and thermal energy. The heat from PV modules should be removed for better electrical performance, and can be converted into useful thermal energy. The test system is installed to top floor of the experimental house in the KEPCO Research Institute. The experimental performance is executed from 13th February to 13th March, 2012. The expected system's thermal performance is 1.9kWh under the horizontal solar radiation is $600W/m^2$ and the air flow in the system is $20CMH/m^2$.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.213-217
• /
• 2009

The transcription characteristics of the mold surface in the molding of aspherical glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. For the form topography, the molded lens showed a transcription ratio of 93.4% against the mold, which is obtained by comparing the form error (PV) values of the mold and the molded lens. The transcription characteristics of the roughness topography were ascertained by bearing ratio analysis.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1114-1115
• /
• 2008

In this paper, we study the optical characteristics of low iron glass for photovoltaic modules fabrication. Tow types of glasses are examined by optical transmittance and reflection measurement. Also, by making laminated glass, we analyze the difference between glass maker. Mini-PV module is fabricated to compare optical reflectance through lamination process. Anti-reflection and catalyst-coated glasses are suggested for advanced technology to obtain high electrical generation output. The specific analysis is shown in the following paper.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.118-120
• /
• 2008

고집속에 따른 태양전지 온도상승에 의한 태양전지 효율 저하를 방지하고,경제적인 저집속형(<5X) 집광형 태양광 모듈 개발을 위하여 본 연구에서는 알루미늄 반사판을 이용한 저집속 (< 5X)집광형 태양광 모듈을 설계 및 제작하여 성능 평가를 실시하였다. 2.25X의 집속비와, 태양광 집속에 의한 태양전지 모듈의 온도 상승을 공기순환을 통한 냉각이 가능하도록 설계/제작된 집광형 태양광 모듈로 부터 1.97배의 출력 증가를 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.236-237
• /
• 2013

최근 박막 태양전지에 대한 관심이 증대되면서 이를 이용한 태양광 PCS에 대한 연구가 활발히 진행되고 있다. 박막 태양전지는 모듈의 특성상, 기존의 비절연형 PCS를 사용하여 시스템을 구성하기에 적합하지 않다. 본 논문에서는 승압형 컨버터, 계통 연계형 단상 인버터 2단으로 구성된 비절연형 PCS에 고주파 절연형 컨버터가 추가되어 3단으로 구성된 박막모듈용 3kW급 고주파 절연 PCS를 소개한다. 또한 각종 시험 결과를 통해 적합성 및 성능을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.47-48
• /
• 2012

In generally, grid connected single-phase flyback inverter is operated as boundary or discontinuous conduction mode. However, the flyback inverter can be operated in continuous conduction mode (CCM) due to its operating conditions in spite of it is designed to operate under boundary or discontinuous conduction mode. This situation causes unintended distortion to output current. In this paper, a current shaping method on unfolding bridge to reduce the output current distortion.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1220-1221
• /
• 2007

Building-integrated photovoltaic(BIPV) perform traditional architectural function of walls and roof while also generating electricity. But most of the absorbed solar energy appears passively as heat, raising the temperature of cells and reducing the efficiency with which the active part is converted into electricity. Therefore this paper presents the comparison of electrical, architectural and thermal performance of roof integrated photovoltaic(PV) modules, which is composed of different hybrid structure layer such as urethane form, waffle stud etc.