• 전기학회논문지
• /
• 제60권9호
• /
• pp.1777-1782
• /
• 2011

Brushless DC motors applied in many control systems because of the good respose characteristic and the easy control characteristic. The speed control of the BLDC motors is important in the systems. This paper has designed PSO-PID speed controller for the speed control of BLDC motors. The PSO algorithm optimized the parameters of the PID controller in the PSO-PID speed controller. The several methods obtained the optimal inertia weight of the PSO algorithm by comparison. The optimal inertia weight of the PSO algorithm optimized the PSO-PID speed controller for BLDC motors. This paper confirmed the performance of proposed PSO-PID speed controller through simulation results.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.330-338
• /
• 2018

비례-적분-미분(PID) 제어기는 단순한 구조와 넓은 범위의 운전영역에서 견고한 성능으로 인해 산업계에서 널리 사용되고 있다. 그러나 제어대상으로서 AVR(Automatic Voltage Regulator)은 전력 시스템의 파라미터의 변동에 강인하지 않다. 따라서 PID 제어기를 사용하여 AVR 시스템의 안정성과 성능을 향상시키는 것이 필요하다. 본 논문에서는 PSO(Partial Swarm Optimization) 알고리즘을 사용하여 AVR 시스템을 위한 최적 PID 제어기 파라미터를 결정하는 새로운 설계 방법을 제시한다. 제안하는 접근법은 쉬운 구현뿐만 아니라 안정된 수렴 특성 및 양호한 계산 효율과 우수한 특성을 갖는다. 또한, 제안 된 PSO-PID 제어기의 성능을 평가하기 위해 새로운 목적함수를 정의한다. 이 목적함수는 최대백분율 오버슈트와 정정시간이 설계사양으로 주어진 경우 이를 반영하기 위한 것이다. 이를 위해 ITAE 평가함수에 제약 조건을 위반하면 벌점을 부과하도록 하여 PSO 알고리즘이 PID 제어기 파라미터를 탐색할 때 설계사양을 만족하도록 하게 한다. 최종적으로 컴퓨터 시뮬레이션을 통해 제안한 PSO-PID 제어기는 단자전압 계단응답에 대해 주어진 설계사양을 만족할 뿐만 아니라 다른 유사한 최근의 연구보다 더 우수한 제어 성능을 보임을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.59-64
• /
• 2022

Vibration is one of the factors that degrades the performance of equipment and measurement equipment used in high-tech industries such as semiconductors and display. The vibration isolator is classified into passive type and active type. The passive vibration isolator has the weakness of insufficient vibration isolation performance in the low frequency band, so an active vibration control system that can overcome these problems is used recently. In this paper, PID controller is used to control the active vibration isolator. Methods for setting the gain of the PID controller include the Zeigler-Nichols method, the pole placement method. These methods have the disadvantage of requiring a lot of time or knowing the system model accurately. This paper proposes the gain auto tuning method of the active vibration isolator applied with the PSO algorithm, which is an optimization algorithm that is easy to implement and has stable convergence performance with low calculations. It is expected that it will be possible to improve vibration isolation performance and reduce the time required for gain tuning by applying the proposed PSO algorithm to the active vibration isolator.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.490-498
• /
• 2016

Proportional Integral Derivative (PID) controller tuning is an area of interest for researchers in many areas of science and engineering. This paper presents a new algorithm for PID controller tuning based on a combination of bacteria foraging and particle swarm optimization. BFO algorithm has recently emerged as a very powerful technique for real parameter optimization. To overcome delay in an optimization, combine the features of BFOA and PSO for tuning the PID controller. This new algorithm is proposed to combine both the algorithms to get better optimization values. The real time prototype model of paper machine is designed and controlled by using PIC microcontroller embedded with the programming in C language.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1380-1385
• /
• 2004

In this paper, auto-tuning technique of the PID controller gain by particle swarm optimization algorithm is presented. PID controller is easy to implement to numerous control systems. After PID gain tuning is completed, its result could be implemented to control spacecraft vibration such as jitter that is high frequency vibration usually over 10Hz. The off-line PID controller tuning is done under system nonlinearities and uncertainties existence, then its result is applied to control experiment device to prove the PSO efficiencies.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.185-188
• /
• 2009

이 논문에서는 PID 알고리즘을 이용하여 시소 시스템의 균형을 위한 위치 제어기를 설계하고자 한다. 시소 시스템은(Seesaw System) 선박 및 항공 역학, 도립진자, 각종 분석, 로봇 시스템 등의 해석에 광범위하게 응용되는 시스템이자 현대 제어 시스템의 이론과 각종 응용문제를 취급할 수 있는 장치이다. 시소 시스템의 경우 시스템이 비선형성이 강한 제어 대상이므로 시스템의 이해와 해석, 그리고 파라미터의 정확한 선정이 필수요소이다. 사용할 시스템 제어 알고리즘에는 간단하고 오랜 역사를 통해 안정성이 보장된 PID 알고리즘과 정확하고 빠른 PID 파라미터 동조에 필요한 연산 최적화 알고리즘인 PSO(Particle Swarm Optimization) 통해 외란이나 제어기의 변화에 빠르게 적응할 수 있도록 하여 성능과 안정성을 보장한다.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.877-885
• /
• 2018

Various controllers such as proportional-integral-derivative (PID) controllers have been designed and optimized for load-following issues in nuclear reactors. To achieve high performance, gain tuning is of great importance in PID controllers. In this work, gains of a PID controller are optimized for power-level control of a typical pressurized water reactor using particle swarm optimization (PSO) algorithm. The point kinetic is used as a reactor power model. In PSO, the objective (cost) function defined by decision variables including overshoot, settling time, and stabilization time (stability condition) must be minimized (optimized). Stability condition is guaranteed by Lyapunov synthesis. The simulation results demonstrated good stability and high performance of the closed-loop PSO-PID controller to response power demand.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2556-2563
• /
• 2021

Metaheuristic algorithms can work well in solving or optimizing problems, especially those that require approximation or do not have a good analytical solution. Particle swarm optimization (PSO) is one of these algorithms. The response quality of these algorithms depends on the objective function and its regulated parameters. The nonlinear nature of the pressurized light-water nuclear reactor (PWR) dynamics is a significant target for PSO. The two-point kinetics model of this type of reactor is used because of fission products properties. The proportional-integral-derivative (PID) controller is intended to control the power level of the PWR at a short-time transient. The absolute error (IAE), integral of square error (ISE), integral of time-absolute error (ITAE), and integral of time-square error (ITSE) objective functions have been used as performance indexes to tune the PID gains with PSO. The optimization results with each of them are evaluated with the number of function evaluations (NFE). All performance indexes achieve good results with differences in the rate of over/under-shoot or convergence rate of the cost function, in the desired time domain.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1297-1302
• /
• 2014

This paper presents modern optimization methods for determining the optimal parameters of proportional-integral-derivative (PID) controller for coupled tank systems. The main objective is to obtain a fast and stable control system for coupled tank systems by tuning of the PID controller using the Particle Swarm Optimization algorithm. The result is compared in terms of system transient characteristics in time domain. The obtained results using the Particle Swarm Optimization algorithm are also compared to conventional PID tuning method like the Ziegler-Nichols tuning method, the Cohen-Coon method and IMC (Internal Model Control). The simulation results have been simulated by MATLAB and show that tuning the PID controller using the Particle Swarm Optimization (PSO) algorithm provides a fast and stable control system with low overshoot, fast rise time and settling time.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 춘계학술대회 학술발표 논문집 제16권 제1호
• /
• pp.22-34
• /
• 2006

o GA-BF approach for improvement of learning and optimization in GA o GA-BF has better response on various test functions o Satisfactory PID controller tuning in AVR, motor vector control systems o Potentially useful in many practically important engineering optimization problems