• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.74-79
• /
• 2023

As the demand for hydrogen increases, the facilities for storing hydrogen has been important, and a few laws for hydrogen facilities should be complied. According to the Occupational Safety and Health Act in Korea, in case liquid hydrogen with a storage capacity of 5 tons or more is handled, a Process Safety Management (PSM) system should be complied. However, there are some standards which are not proper for flammable low-temperature liquefied substances on the current Occupational Safety and Health Act. In this study, 7 key points in process safey information and safety operation procedures among PSM components are suggested and how these key points should be improved is derived based on scientific analysis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.3
• /
• pp.171-177
• /
• 2005

Phase-shifting method using Fourier transform (PSM/FT) has been applied to measurement of in-plane displacement of a specimen. Thirty-two interference fringe patterns each of which has different phase of ${\pi}/16$ radian have been gathered from a specimen with in-plane displacement. Low-pass filtering by 2-D Fourier transform is used to suppress spatial noise of the fringe patterns. ${\alpha}-directional$ Fourier transform for PSM/FT is performed by use of the low-pass filtered 32 fringe patterns. Two kinds of specimens are used for experiment. One is a rectangular steel plate and the other one is a rectangular steel plate containing a circular hole at the center. In-plane displacement of each specimen is measured by PSM/FT, and calculated by finite element method (ANSYS) for comparison. The results are quite comparable, so that PSM/FT can be applied to measurement of in-plane displacement.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.2
• /
• pp.117-128
• /
• 2020

The aim of this study was to examine price sensitivity of industrial products purchased via a group buying system and how industrial products for a group buying system differ from general industrial products, and then identify the major factors in selecting products and the important determinants in purchasing industrial products for school foodservices. The survey was conducted with 250 dietitians (teachers) in Gyeonggi-do Province, who were using industrial products for a group buying system and general industrial products. A paired t-test showed a difference in satisfaction between industrial products for a group buying system and general industrial products by factors, while statistically significant differences were found for red pepper paste, fermented soybean paste and soy sauce in all nine satisfaction factors, including product quality, packaging state, labeling, hygiene, item diversity, specification diversity, price appropriateness and supply. Moreover, analyzing price sensitivity for industrial products for a group buying system, using the PSM method with respect to the issue of high price, showed that the respondents considered that the current unit purchase prices were high for all items investigated. This study suggests that schools would purchase more industrial products for a group buying system, when the pricing of the products are considered with the purchase intention of dietitians (teachers).

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.55-62
• /
• 1996

This paper describes development of Polarized Stereo Monitoring System (KAERI-PSM) and compares the remote handling performance of KAERI-PSM with that of other monitoring systems, electric shutter type stereo monitoring system and general TV monitoring system. Remote handling performance is evaluated by total time and error number on remote operating experiments. Four kinds of remote handling experiments are carried out through 1) directly 2) general TV 3) electric shutter type monitor, and 4) KAERI-PSM. In these experiments six employees are participated and PUMA robot with force-torque reflectional joystic is used. The result of experiments show that camera angle against object is significant factor in monitoring and stereo monitoring system give more performance benifits in terms of accuracy and speed of remote handling operation than general TV monitoring system. In comparision of the polarized and electric shutter type stereo monitoring system, both have similar accuracy and speed for remote handling operation, but the former is superior in image quality and stability of the performance.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.784-786
• /
• 2004

Overlap errors and side-lobes can be simultaneously solved by the rule-based correction using scattering bars with the rules extracted from test patterns. Process parameters affecting the attPSM lithography simulation have been determined by the fitting method to the process data. Overlap errors have been solved applying the correction rules to the metal patterns overlapped with contact/via. Moreover, the optimal insertion rule of the scattering bars has made it possible to suppress the side-lobes and to get additional pattern fidelity at the same time.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.3
• /
• pp.104-108
• /
• 2004

Problems of overlap errors and side-lobe printing by the design rule reduction in the lithography process using attenuated phase-shifting masks(attPSM) have been serious. Overlap errors and side-lobes can be simultaneously solved by the rule-based correction using scattering bars with the rules extracted from test patterns. Process parameters affecting the attPSM lithography simulation have been determined by the fitting method to the process data. Overlap errors have been solved applying the correction rules to the metal patterns overlapped with contact/via. Moreover, the optimal insertion rule of the scattering bars has made it possible to suppress the side-lobes and to get additional pattern fidelity at the same time.

• ETRI Journal
• /
• v.44 no.1
• /
• pp.117-124
• /
• 2022

In this paper, the performance of precoding-aided differential spatial modulation (PDSM) systems with optimal transmit antenna subset (TAS) selection is examined analytically. The average bit error rate (ABER) performance of the optimal TAS selection-based PDSM systems using a zero-forcing (ZF) precoder is evaluated using theoretical upper bound and Monte Carlo simulations. Simulation results validate the analysis and demonstrate a performance penalty < 2.6 dB compared with precoding-aided spatial modulation (PSM) with optimal TAS selection. The performance analysis reveals a transmit diversity gain of (N_T-N_R+1) for the ZF-based PDSM (ZF-PDSM) systems that employ TAS selection with N_T transmit antennas, N_S selected transmit antennas, and N_R receive antennas. It is also shown that reducing the number of activated transmit antennas via optimal TAS selection in the ZF-PDSM systems degrades ABER performance. In addition, the impacts of channel estimation errors on the performance of the ZF-PDSM system with TAS selection are evaluated, and the performance of this system is compared with that of ZF-based PSM with TAS selection.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.17-22
• /
• 1999

This study established management system integrated Safety$\cdot$Health, Management System(SHMS) and Environment Management System(ISO 14000) which satisfy all the systems through analyzing the PSM, SMS, BS 8800 and ISRS. Also, this study presented the guideline model which can make regular document forms in the integrated Safety, Health and Environment Management System. Furthermore, integrating management system developed in this study can reduce the duplication and inefficiency of materials and human resources in chemical industries

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.187-196
• /
• 2008

The system development approach method of the new paradigm, as being standardizing MDA(Model Driven Architecture) in OMG(Object Management Group), the core technique of MDA definite technique structure for system materialization focusing on Model, is to build the design and the statement for system in PIM(Platform Independent Model), Materialization technique, and to build PSM(Platform Specific Model) adapt to materialization environment, and then to be the technique transforming into language Platform suitable to materialization environment. It includes MOF(Meta-Object Facility), UML, XMI(XML Metadata Interchange), CWM(Common Warehouse Metamodel), the core of MDA. Though these operations MDA support automatic tools product the practicable system after carrying out transform operation with the above information. In this thesis, it will be approached how to design and materialize the Bachelor management system based on MDA and the importance of modeling should be emphasized by applying to the approach method based on MDA. It should be suggested how to develop software efficiently, written it out in PIM, and suggested the process transforming PSM into EJB by J2EE Platform. The system is designed and implemented using automatic tool, edit machine(Together Architect 2006 for Eclipse, Edit plus2) supporting MDA and Database Modeling tool(ER/WIN 4.1). In conclusion, it should be suggested the efficiency analysis result for development process of traditional and based on MDA.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.174-179
• /
• 2021

An Edwards curve cryptography (EdCC) core supporting point scalar multiplication (PSM) on Edwards curves of Edwards25519 and Edwards448 was designed. For area-efficient implementation, finite field multiplier based on word-based Montgomery multiplication algorithm was designed, and the extended twisted Edwards coordinates system was adopted to implement point operations without division operation. As a result of synthesizing the EdCC core with 100 MHz clock, it was implemented with 24,073 equivalent gates and 11 kbits RAM, and the maximum operating frequency was estimated to be 285 MHz. The evaluation results show that the EdCC core can compute 299 and 66 PSMs per second on Edwards25519 and Edwards448 curves, respectively. Compared to the ECC core with similar structure, the number of clock cycles required for 256-bit PSM was reduced by about 60%, resulting in 7.3 times improvement in computational performance.