• 한국구조물진단유지관리공학회 논문집
• /
• 제8권3호
• /
• pp.159-167
• /
• 2004

본 연구는 최적설계 프로그램에 의해 FSM 공법의 PSC 박스 거더교를 최소경비로 자동 설계하고 이를 다양한 교량 형식에 적용하여 적정 형고비 Span Length to Girder Depth와 교폭에 따른 적정 셀(cell )수를 검토하고 최적설계의 필요성을 알리는데 목적이 있다. 사용된 최적설계 프로그램은 축차 무제약 최소화 기법을 이용하였고, 설계과정에서 설계점들이 설계가능 영역밖에 있는것을 허용할 수 있도록 Kavlie가 제안한 확장 벌칙함수를 도입하였다. 또한 설계점들의 탐사 방법은 Powell's direct search method를 사용하며, 설계시간을 단축시키기 위해 설계점 변화에 따른 단면력 변화를 Gradient를 이용하여 근사화 시키는 방법을 사용하였다. 그리고 설계변수의 수렴성과 셀수 지간장 차선수별 최적비용의 상관관계를 도출하였다.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.94-100
• /
• 2006

The goal of this study is to show the way to increase the safety of deteriorated PSC beam bridges by the to-box reinforcing method. This method is to change the open girder section into the closed box section by connecting bottom flanges of neighboring PSC girders with the precast panels embedding PS tendons at the anchor block. The box section is composed of three concrete members with different casting ages, RC slab, PSC beam, precast panel. This different aging requires a time-dependent analysis considering construction sequences. Reliability index and failure probability are produced by the AFOSM reliability analysis. Transversely five schemes and longitudinally two schemes are considered. The full reinforcing scheme, transversely and longitudinally, shows the highest reliability index, but it requires more cost for retrofit. The partial reinforcing scheme 4, 4-1 are recommended in this study as the economically best scheme.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.538-541
• /
• 2006

PSC(Prestressed Concrete) box girder bridges have been widely applied in Korea. A number of these bridges have been built by the segmental construction method in the longitudinal direction and(or) vertically along the cross-sectional depth with MSS(Moving Scaffolding System). An actual 2-span continuous PSC box girder bridge of Kyeongbu high speed railway was selected and instrumented with 96 vibrating wire embedded type strain gauges and 2 thermocouples. The long-term behavior of the bridge was monitored through two major points located at mid-span of the first span and at the internal support. Data collection started just after the casting of the first segment (U section). Concrete strain and temperature data were gathered regularly by a data logger (CR10) during 600 days under and after construction. According to this measurement, the parabolic longitudinal strain distribution in the top slab at mid-span is shown. And also, the same distribution at the interior support is shown. The compressive strains at the cantilever region are larger than at the web position and the internal part in the top slab. Strain difference largely happened during the early construction period.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.497-500
• /
• 2000

This paper describes the procedures to estimate for the design thermal loads on prestressed concrete box girder bridges on th basis of the extreme analysis of the temperature data obtained from long-term thermal analyses. Long-term thermal analyses using the environmental data for three years were conducted, and the extreme distributions of th thermal loads are then determined by the tail-equivalence method, and the thermal loads corresponding to selected return period are calculated. Finally, the results are compared to the specifications suggested in a current design code for thermal loads.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.569-579
• /
• 2010

Tolerable vertical displacement of a bridge is dependent on the superstructure-type, slope, span, and etc.. In the design stage, however, resultant force of cross section is examined supposed that the settlement is 1 cm at the bearing point. And the 1cm is sometimes considered as if the criteria of allowable foundation settlement. It is needed to establish the criteria of the tolerable displacement for the small and middle bridges which are widely used in domestic area. The design data of domestic bridges including expressway bridges were collected and analyzed according to the types of superstructures and foundations. And numerical simulations were conducted for RC rigid frame bridges, PSC girder bridges, IPC girder bridges, PSC box girder bridges, and steel box girder bridges to examine the tolerable displacements.

• 한국지진공학회논문집
• /
• 제23권6호
• /
• pp.311-319
• /
• 2019

The number of aged bridges is increasing so that bridges over 30 years old account for about 11% of all bridges. Consequently, the development of a seismic performance evaluation method that considers the effects of ageing is essential for a seismic retrofitting process for improvement of the seismic safety of existing old bridges. Assessment of the damage situation of bridges after the recent earthquakes in Korea has been limited to the bearings, anchor, and concrete mortar on piers. The purpose of this study is to evaluate the seismic responses of PSC box girder bridges by considering the ageing effect of rubber bearings (RBs) and lead-rubber bearings (LRBs). The modification factor proposed by AASHTO is used to take into account the ageing effect in the bearings. PSC box girder bridges with RBs and LRBs were 3D modeled and analyzed with the OpenSEES program. In order to evaluate the ageing effect of RBs and LRBs, 40 near fault and 40 far field records were used as the input earthquakes. When considering the effect of ageing, the displacement responses and shear forces of bridge bearings (RBs and LRBs) were found to increase mostly under the analytical conditions. It was shown that the effect of ageing is greater in the case of RBs than in the case of LRBs.

• 콘크리트학회논문집
• /
• 제19권4호
• /
• pp.433-439
• /
• 2007

본 연구는 하나의 프리캐스트 거더를 분할하여 세그먼트로 각각 공장에서 제작하여 현장으로 운반한 후 포스트텐션 방식으로 체결하여 가설하는 분절공법으로 제작된 철도교 조립식 콘크리트 박스 거더의 정적 성능을 검증하고자 한다. 길이 20m의 실물 조립식 콘크리트 거더를 3등분으로 분절하여 제작한 후, 정적 성능 검증을 위해 같은 제원의 일체 거더와 동일한 조건에서 재하 실험을 수행하였다. 분절 거더 및 일체 거더에 대해 중앙 처짐, 단부 회전각, 균열 양상 등을 비교하였다. 또한 분절 거더의 접합부 거동을 모니터링하기 위해서 수직 상대 변위 및 수평 상대 변위를 최대 재하 하중까지 측정하였다. 분절 거더의 처짐은 육안으로 균열이 감지되는 균열하중 이상부터 일체 거더보다 상대적으로 크게 발생하고 있음을 알 수 있었다. 그러나 분절 거더는 균열하중에 도달하기 전까지 일체 거더와 동일한 거동을 보였다. 또한 분절부의 전단변형 여부를 조사하기 위한 수직 및 수평 상대 변위를 측정한 결과, 최종 재하 하중까지 전단에 의한 변형이 발생하지 않고 있음을 확인하였다. 또한 각 하중단계 별로 비교한 균열 양상은 분절 거더가 일체 거더와 같이 휨에 의한 사인장균열의 형태로 파괴가 진행되고 있음을 보였다.

• Advances in concrete construction
• /
• 제5권5호
• /
• pp.469-479
• /
• 2017

Balanced cantilever construction is extensively used in the construction of prestressed concrete (PSC) box-girder bridges. Shear-lag effect is usually considered in finished bridges, while the cumulative shear-lag effect in bridges during balanced cantilever construction is considered only rarely. In this paper, based on the balanced cantilever construction sequences of large-span PSC box-girder bridges, the difference method is employed to analyze the cumulative shear-lag effect of box girders with varying depth under the concrete segments' own weight. During cantilever construction, no negative shear-lag effect is generated, and the cumulative shear-lag effect under the balanced construction procedure is greater than the instantaneous shear-lag effect in which the full dead weight is applied to the entire cantilever. Three cross-sections of Jianjiang Bridge were chosen for the experimental observation of shear-lag effect, and the experimental results are in keeping with the theoretical results of cumulative shear-lag effect. The research indicates that only calculating the instantaneous shear-lag effect is not sufficiently safe for practical engineering purposes.

• 한국재난정보학회 논문집
• /
• 제8권1호
• /
• pp.36-46
• /
• 2012

작년 3월에 발생한 일본 대지진으로 인해 우리나라 역시 간접피해 등을 우려하며, 지진에 대한 피해를 최소화 할 수 있는 설계방법의 필요성과 기존 구조물의 내진 성능 향상에 대한 관심이 더욱 증가하고 있다. 사회기반시설물인 교량 등의 손상 붕괴는 사회적 경제적으로 미치는 파급효과가 커 이러한 구조물에 대한 내진성능의 평가가 상당히 중요하게 부각되고 있다. 내진성능에 대한 검토방법들은 많지만 결정론적 방법에 의한 것이 대다수로, 지진에 대한 구조물의 안전성 평가에는 손상단계에 따른 취약성 또는 손상도를 평가하는 방법이 필요하다. 본 논문에서는 납면진받침(LRB)과 탄성마찰포트받침(RFPB)을 사용한 PSC Box Girder 교량에 대하여 지진의 특성인 PGA, PGV, SA, SV, SI에 대한 손상도 곡선을 구하고, 두 지진 격리 장치의 성능을 비교 평가하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1168-1173
• /
• 2004

Bridges and tunnels mainly compose the structural system of Kyung-bu high-speed railway in Korea and the prestressed concrete box girder bridges are applied for the most part of bridge structures. Precast full span construction method was practiced in the construction of many prestressed concrete box girder bridges in Kyung-bu high speed railway for the high quality, great construction speed, low construction cost and construction safety. However, there have been no application of this method in continuous bridges until now. Therefore, a new advanced precast full span construction method is developed using pre-tensioning for precast and post-tensioning in alternating the simple span into a continuous bridge system. since the high-speed railway trains can cause dynamic problems in a continuous bridge. This study shows the structural behavior and the construction process of the new advance method.