• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.247-255
• /
• 1998

This study was carried out to investigate changes in the flesh firmness, evolution of ethylene, cell wall components, and degradation and solubilization of polyuronide(PU) and polysaccharide(PS) in green(GP) and mature persimmon(MP) fruits according to testing time of ethylene(50${\mu}\ell$ㆍL$^{-1}$ ). When ethylene was treated in GP and MP, flesh firmness rapidly decreased and it was decreased more GP than MP. When ethylene were treated for 12 hours in GP, production of ethylene began after 3 days. The amount of ethylene product was maximum 16,000 ${\mu}\ell$ㆍL$^{-1}$ at 24 hours of ethylene treatment. However, ethylene was not producted until 7 days after 24 hours ethylene treatment at MP. The content of pectic substances decreased in the distilled- water, 0.05M $Na_2$CO$_3$,4M and 8M KOH-soluble fractions during softening according to increasing time of ethylene treatment. Arabinose and galactose were the major non-cellulosic neutral sugars in the 0.05M CDTA and 0.05M $Na_2$CO$_3$-soluble pectic fractions. Glucose, galactose and xylose were the major non-cellulosic neutral sugars in the 4M KOH- soluble hemicellulosic fraction. High molecular of PU and PS were degraded and solubilized in the distilled-water, 0.05M CDTA 0.05M $Na_2$CO$_3$ and 4M KOH-soluble fractions during time of ethylene treatment.

• Journal of the Optical Society of Korea
• /
• v.10 no.3
• /
• pp.112-117
• /
• 2006

We experimentally investigated the transmission characteristics of 400 Gbit/s (10 Gbit/s ${\times}$ 40 channels) WDM signals with 100 GHz channel spacing over 323 km of installed NZ_DSF. The installed fiber has optical properties of 0.28 dB/km attenuation, 4.3 ps/nm/km dispersion, $0.083ps/nm^2/km$ dispersion slope and less than $0.05ps/km^{1/2}$ PMD coefficient. In this experiment, two cases of dispersion compensation schemes, the lumped type and the distributed type, were compared. The results implied that the distributed type dispersion compensation in which dispersion compensation devices are inserted at the end of the each span showed better transmission performance than the lumped one in which dispersion compensation devices are located at the transmitter and receiver sites. From the analysis of the experimental results, we verified that different transmission performance comes from the power penalty induced by XPM in the distributed scheme is lower than the lumped scheme case.

• Journal of Ginseng Research
• /
• v.22 no.4
• /
• pp.260-266
• /
• 1998

The effects of acidic polysaccharide of Korean red ginseng (AcPS) on metabolisms of drug and alcohol in the liver were investigated. We could find that treatment of AcPS to six-week ethanol administered rats lowered the levels of alcohol and acetaldehyde in serum. We also we found that treatment of AcPS normalized the elevated activities of free radical generation system, decreased activities of detoxification system such as ${\gamma}$-glutamylcysteine synthetase and glutathione S-transferase, and decreased activities of acetaldehyde metabolizing system. The cytosolic alcohol dehy drogenase and microsomal ethanol oxidizing system (MEOS) were strongly enhanced.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.1
• /
• pp.77-85
• /
• 2001

This paper was to investigate the preparation of polysulfone(PS), polyethersulfone(PES) and polyphenylsulfone(PPS) membrane. The thermal property of PPS was higher than that of others. From the result of SEM, the concentration of polymer was found to have a significant effect on the structure of membrane, and the structure of membrane made of PES is found to have regular micell form of asymmetry. Permeability and selectivity for oxygen and nitrogen gas in the air were analyzed by GC. Permeabilities of the membrane made of PES for oxygen and nitrogen in air, 1.5 and $0.7(x10^9[cm^3(STP)cm/cm^2seccmHg]) $, respectively was higher than that of others. and Selectivity of the membrane made of PPS for oxygen to nitrogen gas in air was 2.9.

• Journal of Environmental Science International
• /
• v.5 no.4
• /
• pp.545-553
• /
• 1996

The effects of 0.2 ppm ozone on the developing chloroplast of barley (Hordeum vulgare L.) seedling during greening were examined by chlorophyll contents, photosynthetic electron tiansport activity, Fo, Fv and fluorescence quenching coefficient. Chlorophyll contents of seedling treated with ozone were not changed in comparison with the control during the 96 h greening experiment, but PS II activity of the chloroplasts of seedlings treated with ozone was decreases by- l5%. Fo was slightly decreased but Fv was decreases by 5% in comparison with the control, In fluorescence quenching analysis, qP and qE were decreased by 11% and 9%, respectively, in comparison with the control. These results suggest that oxidation site of PS II is the site affected mostly and PQ pool is also affected slightly by 0.2 ppm ozone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.172-176
• /
• 2003

In this paper, we studied the effects of mold temperature on the microstructure of injection molded parts. The weld line decreases in length and width as mold temperature increases. We investigated the dimensional stability of the parts made of two kinds of resin(polypropylene and polystyrene) by varying the mold temperature. As the mold temperature is high, both the shrinkage ratio and the thickness difference for the PS parts decreases. But the observation of PP parts shows a tendency to increase. The easiness of cavity filling and transcription of the mold texture is improved as the mold temperature is high.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.861-864
• /
• 2005

In this paper, we system the system design and numerical analysis of the ultrafast optical delay line using by optical phase modulator. The numerical analysis carried out with 1310nm, lops laser and electro-optic phase modulator. As the results of numerical analysis, we show a scanning rate of 0.5 GHz and a delay range of 19.0ps. Compare with mechanical delay line, the optical delay line has a high scanning speed and a high repetition rate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.352-358
• /
• 2016

A 5-phase phase-locked loop (PLL) for USB2.0 applications was implemented by using an all-synthesis technique. The length of the time-to-digital converter for the fine phase detector was halved by the operation of a coarse phase detector that uses 5-phase clocks. The maximum time difference between the rising edges of two adjacent-phase clocks was 6 ps at 480 MHz. The PLL chip in a 65-nm process occupies $0.038mm^2$, consumes 4.8 mW at 1.2 V. The measured rms and peak-to-peak output jitters are 8.6 ps and 45 ps, respectively.

• IE interfaces
• /
• v.13 no.4
• /
• pp.591-598
• /
• 2000

In this paper, an efficient algorithm is proposed to find parting lines(PL) and generate parting surfaces(PS) for an injection mold design. We used a Face-Edge Graph which can be made by B-rep information of solid model. The graph is useful for finding the peripheral-loop edges for PL and the inner-loop edges for hole-patch. The PS can be generated automatically by selecting pre-defined direction lines. We can create a core and cavity molds by trimming the raw stock block with the PS and the upper/lower faces of a product model. We implemented proposed method with Unigraphics API functions and C language, and tesed on Unigraphics V15.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.4
• /
• pp.551-565
• /
• 1996

We present the required handover capacity of personal communication service exchange(PCX). We use the flow-based mobility model. The dimension of PCX area and the number of radio port controller(RPC) in a PCX are determined according to the traffic carrying capacity of switching system and RPC. For the rectangular or square-shaped PCX/RPC area and the personal communication service environment with pedestrian traffic, we perform numerical computations to investigate the sensitivity to cell size, portable station(PS) terminating traffic, its density, and its average speed. The results how that the size of PCX/RPC area decreases as the PS terminating traffic and the PS density increase, and the PCX handover capacity required is more than 73,000 in the number of transactions per hour.