• Title/Summary/Keyword: PPM modulation

Search Result 107, Processing Time 0.028 seconds

Performance Analysis of Ultra Wide Band Systems in Indoor Wireless Channel (실내 무선 채널에서 초광대역 무선통신 시스템의 성능 분석)

  • Kim, Eun-Cheol;Woo, Sang-Kyu;Yang, Jae-Soo;Kim, Jin-Young
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2008.08a
    • /
    • pp.39-42
    • /
    • 2008
  • In this paper, we analyze the performance of ultra wide band (UWB) systems in indoor wireless channel in accordance with the number of pulses per bit at transmit signals and the decision types of receiver. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a. Two types of UWB signals are considered One is the pulse position modulation-time hopping (PPM-TH) signal. And the other is the pulse amplitude modulation-direct sequence (PAM-DS) signal. It is assumed that the receiver is an ideal receiver which can receive all signals of the multipath.

  • PDF

NDIR CO2 Gas Sensor for Improving Indoor Air Quality (실내 공기질 향상을 위한 비분산 적외선 이산화탄소 가스센서)

  • Yi, Seung-Hwan;Park, Jeong-Min;Park, Young-Hwan;Han, Seung-Oh
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.18 no.7
    • /
    • pp.628-634
    • /
    • 2005
  • We have simulated and proposed novel optical cavity, which has two elliptical mirrors, for NDIR gas sensor module and have tested it from 0 ppm to 2,000 ppm $CO_2$ concentration. The proposed sensor module shows the maximum peak voltage at 500 ms pulse modulation time, however, it shows a maximum voltage changes at 200 ms pulse duration with 18,000 times amplification gain. From 0 ppm to 2,000 ppm, the voltage difference of sensor module $({\Delta}V)$ shows 360 mV at 200 ms pulse duration and 3 sec turn-off time. The response time of designed sensor module is about 30 seconds.

Design and Performance Analysis of Quadrature-Amplitude-Position-Modulation Method for the High Power Efficiency (고전력 효율 Quadrature-Amplitude-Position-Modulation 변조 방식과 성능 평가)

  • Choi, Jae-Hoon;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.2A
    • /
    • pp.108-113
    • /
    • 2011
  • In this paper, we propose QAPM(Quadrature Amplitude Position Modulation) modulation scheme for improving power efficiency and we compare existing PSSK(Phase Silence Shift Keying) and QAPM. An existing PSSK Modulation is extension from PSK modulation technique. The conventional PSSK modulation technique can be regarded as an extension from PSK modulation. And this PSSK has better power efficiency than PSK modulation. The Bandwidth efficiency of PSSK is half than PSK, but improved BER(Bit Error Rate) performance. A propose QAPM scheme is build on QAM. And BER performance of QAPM is better than PSSK because BER performance of QAM is better than PSK. In this paper, we compare PSSK and QAPM regard to bit error rate and throughput.

Exact Bit Error Rate Calculation of UWB-TH PPM Multiple Access Communication systems (UWB-TH PPM 다중 통신시스템의 정확한 비트 오율의 계산)

  • Park, Jang-Woo;Cho, Sung-Eon;Choi, Yong-Suk
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.6
    • /
    • pp.1174-1181
    • /
    • 2005
  • The exact bit error rate(BER) calculation of an UWB-TH PPM multiple access communication system, which is known to be suitable for the fast transmission of massive information data, is introduced. The statistic feature of the multiple access intereference (MAI) of the system is precisely modeled by the characteristic function technique. The concrete expression for the MAI allows the exact expression for BER to be derived. In addition, we propose the approximate expression for the BER which reveals superior accuracy to the expression from the previous Gaussian approximation of the MAI. The validity of the proposed expressions is confirmed from the comparison of proposed results with the results from Monte-Carlo simulation.

Long Distance High Efficiency Transmission Techniques for Digital Signage (디지털 사이니지를 위한 장거리 고효율 전송 기법)

  • Lee, Sun Yui;Cha, Jae Sang;Jang, Yeong Min;Kim, Jin Young
    • Journal of Satellite, Information and Communications
    • /
    • v.10 no.1
    • /
    • pp.62-66
    • /
    • 2015
  • This paper introduces various applications and contents of digital signage, and analyzes conventional communication techniques to increase communication range. To realize digital signage in long distance, this paper proposes a hybrid modulation scheme and analyzes its performance. To verify its performance in real channel environment, we mapped symbols and experimented data transmission and reception with a visible light communication module with USRP. As a result, we confirmed a data receiving range and power of transmission and reception of the hybrid modulation mode. Also, we showed that the proposed modulation scheme has better performance of communication range and power efficiency than that of the conventional QAM technique.

Hybrid Communication System for Real-time Video Transmission of Multicopter (멀티콥터의 실시간 영상 전송을 위한 하이브리드 통신 방식)

  • Lee, Sun Yui;Park, Ji Ho;Kim, Jin Young
    • Journal of Satellite, Information and Communications
    • /
    • v.9 no.4
    • /
    • pp.82-86
    • /
    • 2014
  • In this paper, we propose a novel modulation scheme specialized in real time broadcast system using a multicopter. Since multicopters have many advantages in aerial photography, they have been widely used in broadcasting technologies. However, because of restrictions on flight time, it is difficult to utilize multicopters in real time broadcasting systems. Therefore, video transmission using multicopter is necessary for low power communication techniques in air channel environment. Performance results of the hybrid modulation in this paper are compared to that of conventional modulations with Bit Error Rate (BER) and Signal to Noise Ratio (SNR) simulations. The results also showed that proposed system is suitable for aerial photography. Experiments demonstrated the superiority of the proposed modulation scheme by showing received symbols through an USRP equipment.

Temperature Compensation of NDIR CO2 Gas Sensor (비분산 적외선 이산화탄소 센서의 온도 보상)

  • Park, Jung-Min;Park, Young-Hwan;Yi, Seung-Hwan;Park, Jeong-Ik
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.07a
    • /
    • pp.81-82
    • /
    • 2005
  • 본 논문에서는 두 개의 오목 반사경으로 형성된 광 공동 구조의 비문산 적외선 (NDIR) 가스센서를 제작하였다. 증폭비는 18,000 배, 램프 off 시간은 3초로 일정하게 하고 펄스 modulation 시간을 200ms에서 600ms까지 변화시켰을 때. 300ms에서 가장 효율적인 출력신호를 확보할 수 있었다. 그리고 $5^{\circ}C$에서 $45^{\circ}C$까지 $10^{\circ}C$ 간격으로 온도를 변화시키면서 이산화탄소의 농도를 0ppm에서 2000ppm까지 증가시켰다. 이때, 약 400mV의 전압변화가 있었다. 온도가 상승함에 따라 0ppm에서의 출력전압은 감소하는 양상을 나타내었다. 또한 온도변화 대비 출력특성과의 상관성 해석을 통하여 온도 보상 방법을 고안하였으며, 본 연구에서 제작한 센서모듈의 응답시간은 약 30초였다.

  • PDF

Design of Pulse Tranceiver for Antipodal Ultra Wideband System (Antipodal 초광대역 통신 시스템의 변·복조기 설계)

  • Lee, Jung Suk;Kim, Yoo Chang;Kim, Won Hoo
    • Journal of Advanced Navigation Technology
    • /
    • v.5 no.2
    • /
    • pp.134-140
    • /
    • 2001
  • Ultra Wideband(UWB) system uses wide band signal, which power spectral density likes as a noise floor, so UWB system can be used high speed communication without interfering with other communication system. As this system doesn't use carrier, its structure would be very simple and consume very low power. But conventional UWB system uses Pulse Positioning Modulation(PPM) Method. Therefore it could be to produce discrete power spectrum which decreases system efficiency unintentionally. For eliminating discrete power spectrum and further Euclidean distance, we propose UWB system using Antipodal signal. And we design and simulate antipodal tranceiver using Advanced Design System(ADS).

  • PDF

Delay-Throughput Analysis Based on Cross-Layer Concept for Optical CDMA Systems (Cross-layer 개념을 바탕으로 한 광 CDMA 시스템을 위한 Delay-Throughput 분석)

  • Kim, Yoon-Hyun;Kim, Seung-Jong;O, Yeong-Cheol;Lee, Seong-Chun;Kim, Jin-Young
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2009.08a
    • /
    • pp.314-319
    • /
    • 2009
  • In this paper, the network performance of a turbo coded optical code division multiple access (COMA) system with cross-layer, which is between physical and network layers, concept is analyzed and simulated We consider physical and MAC layers in a cross-layer concept. An intensity-modulated/direct-detection (IM/DD) optical system employing pulse position modulation (PPM) is considered In order to increase the system performance, turbo codes composed of parallel concatenated convolutional codes (PCCCs) is utilized. The network performance is evaluated in terms of bit error probability (BEP). From the simulation results, it is demonstrated that turbo coding offers considerable coding gain with reasonable encoding and decoding complexity. Also, it is confirmed that the performance of such an optical COMA network can be substantially improved by increasing the interleaver length and the number of iterations in the decoding process. The results of this paper can be applied to implement the indoor optical wireless LANs.

  • PDF