• 제목/요약/키워드: POD analysis

검색결과 213건 처리시간 0.022초

감마선 완조사에 따른 국화 'ARTI-purple'과 'ARTI-queen'의 생육 및 항산화 효소 활성 비교 분석 (Comparative Analysis of Growth and Antioxidant Enzyme Activities from Two Chrysanthemum Varieties, 'ARTI-purple' and 'ARTI-queen' by Chronic Irradiation of Gamma-ray)

  • 성상엽;이유미;김상훈;하보근;강시용;김진백;김동섭
    • 원예과학기술지
    • /
    • 제31권4호
    • /
    • pp.490-495
    • /
    • 2013
  • 국화 'ARTI-purple'과 'ARTI-queen' 두 품종의 발근된 어린 식물체를 감마파이토트론을 이용하여 4주간에 걸쳐 30, 50, 70, 100Gy로 장기간 완조사를 수행하고 감마선 완조사에 따른 생육, 항산화 효소(ascorbate peroxidase, APX; catalase, CAT; peroxidase, POD; superoxidase dismutase, SOD)의 반응 및 malondialdehyde(MDA) 함량의 변화를 조사하였다. 식물의 생육은 초장, 잎의 수, 절간장, 줄기 직경, 잎 두께 등 5개 요소를 4주간의 완조사 후 관찰하였고, 식물체 초장(p<0.001), 잎의 수(p<0.001), 절간장(p<0.01), 줄기 직경(p<0.05)에서 감마선 완조사에 따른 유의적인 감소가 확인되었다. 그리고 그 가운데 절간장은 약 65Gy에서 $RD_{50}$(Reduction Dose 50)을 보이며 가장 높은 감소를 보였다. 4주 회복 기간이 지난 시점에서 항산화 반응을 확인한 결과, APX(p<0.01), SOD(p<0.01), POD(p<0.001)의 활성이 유의적인 증가를 보였고, MDA 함량은 70과 100Gy 조사구에서 유의적인 증가를 보여 산화스트레스가 상당기간 지속됨을 확인할 수 있었다. 본 연구에서 $RD_{50}$의 생육저하를 보이지 않으며, 항산화 효소의 반응 및 MDA 함량이 대조식물과 유의적이 차이를 보이지 않는 최대 선량은 50Gy이었고, 100Gy 수준에서 $RD_{50}$ 이하의 생육을 보이는 것을 확인할 수 있었다.

격자기반 침수해석모델(GIAM) 개발 (Development of Grid based Inundation Analysis Model (GIAM))

  • 이병주;윤성심
    • 한국수자원학회논문집
    • /
    • 제50권3호
    • /
    • pp.181-190
    • /
    • 2017
  • 도시화에 의한 인구집중과 불투수율 증가, 강우강도 증가는 도시침수피해의 주원인이다. 도시침수피해를 줄이기 위해 도시 내 지형/지물의 영향을 고려하고 상세 침수지역을 모의할 수 있는 침수해석모델이 필요하다. 본 연구에서는 2차원 천수방정식을 이용한 격자기반 침수해석모델(GIAM)을 개발하였다. 대상지역은 논현, 역삼, 서초3~5의 5개 배수분구를 포함하는 강남지역 $7.4km^2$이며 맨홀 월류량은 EPA SWMM5를 이용하여 산정하고 6 m 격자크기에 대해 침수모의가 가능하도록 모델을 구축하였다. 모델 적용성 평가를 위해 분석기간은 2010년 9월 21일과 2011년 7월 27일 호우사례를 선정하였다. 모델 정확도를 평가하기 위해 침수피해가구 현황을 이용하여 POD를 분석한 결과 각각 0.61과 0.57의 정확도를 보였다. 개발된 모형은 강우시나리오에 따른 침수취약지역 추정과 실시간 침수예측을 위한 도구로 활용될 수 있을 것으로 판단된다.

동부 Diallel Cross$ F_2$세대의 유전분석에 관한 연구 (Studies on Genetic Analysis by the Diallel Crosses in $F_2$ Generation of Cowpea(Vigna sinensis savi.))

  • 김진형;고미석;장권열
    • 한국작물학회지
    • /
    • 제28권2호
    • /
    • pp.216-226
    • /
    • 1983
  • 신 두과작물 증산의 중요성에 비추어 동부의 육종상 기초자료를 얻고자, 품종중 특성이 뚜렷한 6개품종을 2면교잡하여 교배친 6개품종과 $F_2$세대 15개 조합을 재료로 각 형질에 관여하는 유전자의 분포상태 및 우성정도 그리고 조합능력 등을 추정한 바, 그 결과를 요약하면 다음과 같다. 1. Vr-Wr Graph에서 개화일수, 분지수, 협장, 주당협장, 주당립수, 백립중 및 구당립중의 7개형질은 불완전우성이었고, 성숙일수, 생육일수, 절간장 및 협당립수는 초우성으로 각각 나타났으나 경직경은 완전우성에 가까운 불완전우성이었다. 2. 각 형질의 우성정도를 본바, 개화일수, 성숙일수, 생육일수, 절간장, 주당협수, 협당립수, 주당립수, 구당립중의 8개형질은 그 값이 1이상이었고, 그 중 개화일수, 생육일수, 주당협수, 주당립수, 구당립중의 5개형질에 관여하는 유전자에서는 D < H로서 우성효과가 더 큰 것으로 추정되었다. 또한 평균우성정도는 성숙일수, 분기수, 주당립수의 형질들이 부의 값을 보여 타 형질과는 다른 경향이었으며, 우성열성유전자평균빈도는 성숙일수, 절간장, 분기수, 협당립수에서 비교적 낮은 값을 나타내었다. 3. 일반조합능력(GCA)과 특정조합능력(SCA)을 검정한 바, 전 형질에서 일반조합능력의 값이 특정조합능력 보다 컸으며, 그중 구당립중이 일반조합능력과 특정조합능력에서 가장 높았다. 4. 조합능력의 효과에서, 일반조합능력의 효과는 J78이 개화일수, 생육일수, 주당협수, 주당립수, 구당립중의 5개형질에서 높게 나타났으며, 특정조합능력의 효과는 대체로 조합과 형질에 따라서 상이하였으나 TVu 1857$\times$TVu 2885, TVu 2702$\times$J78의 조합에서 그 효과가 크게 평가되었다.dica${\times}$Japonica 품종들은 $17/9^{\circ}C$에서만 고사되고 $20/12^{\circ}C$에서는 초기등숙이 정체되었다가 2주일후부터 등숙이 서서히 시작되었다. 7. 온도조건에 따른 복백미의 형성은 최적온도$(26/18^{\circ}C)$로부터 최저나 최고조건에서 많았고 사미 및 적미도 같은 경향으로 나타났다. 8. 현미립의 길이 및 두께 폭에 대한 영향을 보면 저온조건$(17/9^{\circ}C\;20/12^{\circ}C)$에서 짧거나, 얇고, 좁은 편이었다. 9. 온도별 립중분포의 빈도를 보면 IR36은 최고온도조건이나 $(32/24^{\circ}C)$ 최저온도$(23/13^{\circ}C)$에서 동일한 립중분포를 보였고 최적온도조건에서는 $(26/18^{\circ}C$ 높은 립중분포를 보였고 진흥은 최고, 최저, 최적온도 순으로 립중증가의 빈도를 보였으며 Indica${\times}$Japonica 품종들은 진흥과 IR36품종의 중간 영역에 머물고 있었다.mite처리구가 8.6%, 유황첨가구가 5.7~7.4% 증수되었음을 보이었다. 7. 식물체중의 조단백질 함량은 대조구, 5%, 10% 유황첨가구가 3.31~3.50%로서 비슷하였고 15% 유황첨가구는 3.94%, Dolomite첨가구는 5.38%였다. 아미노산도 15%유황첨가구와 Dolomite첨가구가 많이 함유되어 있었다. 현미중 조단백질은 15%유황첨가구가 10.14%로서 최고이었으며 10%유황첨가구와 Dolomite첨가구는 9.85%로서 다음이었다. 아미노산도 대조구의 현미에는 유황처리구보다 작았으며 유황처리구에서는

  • PDF

Automated Analysis Technique Developed for Detection of ODSCC on the Tubes of OPR1000 Steam Generator

  • Kim, In Chul;Nam, Min Woo
    • 비파괴검사학회지
    • /
    • 제33권6호
    • /
    • pp.519-523
    • /
    • 2013
  • A steam generator (SG) tube is an important component of a nuclear power plant (NPP). It works as a pressure boundary between the primary and secondary systems. The integrity of a SG tube can be assessed by an eddy current test every outage. The eddy current technique(adopting a bobbin probe) is currently the main technique used to assess the integrity of the tubing of a steam generator. An eddy current signal analyst for steam generator tubes continuously analyzes data over a given period of time. However, there are possibilities that the analyst conducting the test may get tired and cause mistakes, such as: missing indications or not being able to separate a true defect signal from one that is more complicated. This error could lead to confusion and an improper interpretation of the signal analysis. In order to avoid these possibilities, many countries of opted for automated analyses. Axial ODSCC (outside diameter stress corrosion cracking) defects on the tubes of OPR1000 steam generators have been found on the tube that are in contract with tube support plates. In this study, automated analysis software called CDS (computer data screening) made by Zetec was used. This paper will discuss the results of introducing an automated analysis system for an axial ODSCC on the tubes of an OPR1000 steam generator.

부산항 컨테이너 전용 터미널 운영 개선을 위한 연구 (A Study on the Operational Improvement at Pusan Container Terminal)

  • 허윤수;하원익;정승호
    • 한국항만학회지
    • /
    • 제14권1호
    • /
    • pp.13-26
    • /
    • 2000
  • In this paper, we compare and analyze the current state of the productivity of the stevedoring work among several container terminals in 1999. Based on these results of analysis, we firstly classify several factors which impede the efficient operations of container terminal as follows ; late arrival of container beyond cargo closing time(CCT), change of port of destination, change of vessel, and return cargo. Such factors are major cause for the cargo rehandling on terminals, thus deteriorate the overall performance of transfer crane during the stevedoring work. In order to improve the productivity of container terminal, we suggest that it is necessary for establishing and operating the efficient logistics management system. Especially, we emphasize the importance of information exchange on the scheduled cargoes among the relevant parties such as shippers, shipping companies, and terminal operators, which is the most effective way to alleviate the cargo rehandling.

  • PDF

적합직교모드를 이용한 동적모드 AFM 의 비선형 모델링 (Nonlinear Modeling of Dynamic AFM Using Proper Orthogonal Modes)

  • 홍상혁;이수일
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.379-382
    • /
    • 2007
  • The proper orthogonal decomposition(POD) is used to the modal analysis of microcantilever of dynamic mode atomic force microscopy(AFM). The proper orthogonal modes(POM) are extracted from vibrating signals of microcantilever when it resonates and taps the sample. The POMs resemble the linear normal modes(LNM) of cantilever vibrating at each resonance frequency. Some of POMs in tapping microcantilever show quite different shapes from the POMs of the resonating microcantilever. Also this POMs can be applied to model for the complex nonlinear behavior of the dynamic mode AFM microcantilevers.

  • PDF

다목적실용위성5호 레이저반사경의 Link Budget 분석 (Link Budget Analysis of Laser Retroreflector Array for KOMPSAT-5)

  • 이상현;김경희;이준호;진종한;임형철;박종욱
    • 한국항공우주학회지
    • /
    • 제36권1호
    • /
    • pp.92-99
    • /
    • 2008
  • 다목적실용위성5호는 정밀궤도결정을 위하여 위성레이저반사경을 부착할 예정이다. 레이저반사경은 독일 DFZ에서 개발된 것으로 4개의 코너큐브로 구성된 피라미드 형태를 갖는다. 본 논문에서는 레이저반사경의 유효면적과 link budget에 따른 광자수 계산 및 지상관측소 위치에 따른 광자수 계산 등의 성능 해석을 수행하였다.

국내 차기 다련장 로켓 개발방안에 대한 고찰 (A Study on the Development Method of the Domestic New Generation Multiple Launcher Rocket System)

  • 조기홍
    • 한국군사과학기술학회지
    • /
    • 제11권6호
    • /
    • pp.21-29
    • /
    • 2008
  • Korean army currently considers the development of the advanced MLRS(Multiple Launcher Rocket System) as a new alternative, which responses on the renovation of the artillery and future battle field environment. Therefore, This study suggests that the development methods of MLRS based on the analysis of the future battle field environment, world wide development trends of the MLRS and operation states of the domestic MLRS. According to this study, the development methods of new generation MLRS should be included a 230/130mm combined launcher competible with conventional 227mm on the vehicle, advanced FCS(Fire Control System), GPS/INS integration navigation system, Pod of ammunitiom, ammunition carrring vehicle and guided rocket munitions, etc.

초음파 비파괴검사의 신뢰도 평가 모델 (Model of Reliability Assessment in Ultrasonic Nondestructive Inspection)

  • 박익근;박은수;김현묵;박윤원;강석철;최영환;이진호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집A
    • /
    • pp.240-245
    • /
    • 2001
  • Ultrasonic inspection system is consisted of the operator, equipment and procedure. The reliability of results in ultrasonic inspection is affected by its ability. Furthermore, the reliability of nondestructive testing is influenced by the inspection environment, other materials and types of defect. Therefore, it is very difficult to estimate the reliability of NDT due to various factors. In this study, the probability of detection, used logistic probability model and Monte Carlo simulation, estimated the reliability of ultrasonic inspection. The utility of the NDT reliability assesment is verified by the analysis of the data from round robin test applied these models.

  • PDF

원전 배관 결함의 크기측정성능에 대한 초음파 검사시스템의 확률론적 신뢰도 평가 (Probabilistic Reliability Analysis of Ultrasonic Inspection System about Sizing Performance of Defects in Piping on Nuclear Power Plant)

  • 김현묵;정지홍;지용우;장경영;박익근;박윤원
    • 한국신뢰성학회:학술대회논문집
    • /
    • 한국신뢰성학회 2002년도 정기학술대회
    • /
    • pp.217-224
    • /
    • 2002
  • The performance demonstration round robin test was conducted to quantify the capability of ultrasonic inspection for in-service and to address some aspects of reliability for nondestructive evaluation. The fifteen inspection teams who employed procedures that met or exceeded ASME Sec. XI code requirements detected the piping of nuclear power plant with various cracks to evaluate the capability of detection. With data from PD-RR test, the performance of ultrasonic nondestructive inspection could be assessed using probability of length and depth sizing of cracks.

  • PDF